DEV Community

Cover image for ๐Ÿฌ AWS CDK 101 -๐Ÿ  Send message across accounts using SNS topic and SQS
Aravind V for AWS Community Builders

Posted on • Edited on • Originally published at devpost.hashnode.dev

๐Ÿฌ AWS CDK 101 -๐Ÿ  Send message across accounts using SNS topic and SQS

๐Ÿ”ฐ Beginners new to AWS CDK, please do look at my previous articles one by one in this series.

If in case missed my previous article, do find it with the below links.

๐Ÿ” Original previous post at ๐Ÿ”— Dev Post

๐Ÿ” Reposted the previous post at ๐Ÿ”— dev to @aravindvcyber

Also, we have started to develop an open source project which we would be using to play around with refracting the architecture as well as learn CDK stuff at the same time we will provide something useful for our community. Find more about this discussed in the article below.

arch

๐Ÿ” Original project post at ๐Ÿ”— Dev Post

๐Ÿ” Reposted project post at ๐Ÿ”— dev to @aravindvcyber

event-forwarder Github repo

Cross Account sendMessage ๐Ÿก

Earlier in our article, we have seen how to use custom Eventbridge and SQS by configuring an event rule and target which shifts the messages to the sqs queue and extended the same to remote stacks as well. Now let us make one more addition to our stack by retrieving the dlq messages from the remote stack across regions to our processor region.

Original post at ๐Ÿ”— Dev Post

Reposted at ๐Ÿ”— dev to @aravindvcyber

cross messages

To start with we will be first discussing how to start polling the messages from the dlq using a lambda processor.

Before that let us set up a lambda layer that will have our external dependencies necessary for logging and monitoring.



export const generateLayerVersion = (
  scope: Construct,
  layerName: string,
  props: Partial<LayerVersion>
): LayerVersion => {
  return new LayerVersion(scope, layerName, {
    ...defaultLayerProps,
    code: Code.fromAsset(join(__dirname, "..", "layers", layerName)),
    ...props,
  });
};

const powertoolsSDK = generateLayerVersion(this, "powertoolsSDK", {});

exportOutput(this, "powertoolsSDKArn", powertoolsSDK.layerVersionArn);



Enter fullscreen mode Exit fullscreen mode

Lambda processor definition ๐Ÿชด

Here you can find the definition of the lambda function which will be used to poll messages from dlq and push to SNS topic.



 const failedMessageAggregator = new Function(
      this,
      "failedMessageAggregator",
      {
        code: Code.fromAsset("dist/lambda/failed-message-aggregator"),
        handler: "failed-message-aggregator.handler",
        ...commonLambdaProps,
        functionName: "failedMessageAggregator",
        layers: [powertoolsSDK],
        environment: {
          TOPIC_ARN: remoteStackEventTargetDlqSns.topicArn,
          TZ: config.get("timeZone"),
          LOCALE: config.get("locale"),
        },
      }
    );

failedMessageAggregator.applyRemovalPolicy(RemovalPolicy.DESTROY);


Enter fullscreen mode Exit fullscreen mode

lambda def

Lambda handler code ๐ŸŒท

The full and latest code should be found in the git hub repo below.

failed-message-aggregator.ts



class Lambda implements LambdaInterface {

  @tracer.captureMethod()
  private async processSQSRecord (rec: SQSRecord)  {
    logger.info("Fetching DLQ message:", {rec});
    const params: PublishInput = {
      Message: rec.body,
      Subject: "Forwarding event message to SNS topic",
      TopicArn: process.env.TOPIC_ARN,
    };
    const snsResult: PublishResponse = await sns.publish(params).promise();
    logger.info("Success", { params, snsResult });
  }

  public async handler(event: SQSEvent) {
    try {
      await Promise.all(
        event.Records.map(async (rec: SQSRecord) => {
          await this.processSQSRecord(rec);
        })
      );
      return {
        statusCode: 200,
        headers: { "Content-Type": "text/json" },
        body: {
          EventsReceived: [...event.Records].length,
        },
      };
    } catch (error) {
      logger.error("Error", { error });
      return {
        statusCode: 400,
        headers: { "Content-Type": "text/json" },
        body: {
          EventsReceived: [...event.Records].length,
          Error: error
        },
      };
    }
  };

}


Enter fullscreen mode Exit fullscreen mode

Event Source mapping DLQ to lambda ๐ŸŒณ

Here we will map the remote dlq to trigger the lambda which we have built above.



failedMessageAggregator.addEventSource(
      new SqsEventSource(remoteStackEventTargetDlq.queue, {
        batchSize: 10,
        maxBatchingWindow: Duration.seconds(20),
      })
);


Enter fullscreen mode Exit fullscreen mode

lambda trigger

trigger info

SNS topic to push to subscribers ๐Ÿฆš

This topic will be used to receive messages from the lambda and push into relevant subscriber channels. Here we will subscribe this to common dlq in the processor stack.



const remoteStackEventTargetDlqSns = new Topic(
      this,
      "remoteStackEventTargetDlqSns",
      {
        displayName: "remoteStackEventTargetDlqSns",
        topicName: "remoteStackEventTargetDlqSns",
      }
);

remoteStackEventTargetDlqSns.applyRemovalPolicy(RemovalPolicy.DESTROY);

exportOutput(
      this,
      "remoteStackEventTargetDlqSnsArn",
      remoteStackEventTargetDlqSns.topicArn
);


Enter fullscreen mode Exit fullscreen mode

Granting access to lambda to Send Message ๐Ÿ‹

Now will be grant access to the lambda function to send messages as the producer.




remoteStackEventTargetDlqSns.grantPublish(failedMessageAggregator);



Enter fullscreen mode Exit fullscreen mode

sns-lambda-sqs

Two-way handshake to link SNS to SQS ๐Ÿฅฌ

With regards to sns and sqs in different account it is essential to set up the two-way handshake for this there have to be two actions allowed one at each end.

  • sns:Subscribe in remote topic
  • sqs:SendMessage in consumer queue (subscriber)

Remote stack configurations

Granting access to processor account to subscribe

Here we will be granting access to processor account resources to subscribe to this topic as follows.



remoteStackEventTargetDlqSns.addToResourcePolicy(
      new PolicyStatement({
        sid: "Cross Account Access to subscribe",
        effect: Effect.ALLOW,
        principals: [new AccountPrincipal(targetAccount)],
        actions: ["sns:Subscribe"],
        resources: [remoteStackEventTargetDlqSns.topicArn],
      })
);


Enter fullscreen mode Exit fullscreen mode

Processor stack configurations ๐Ÿ๏ธ




remoteAccounts.map((account: string) => {
      remoteRegions.map((region: string) => {

        // Here we will be adding the reference and the subscription
    });
});


Enter fullscreen mode Exit fullscreen mode

Referencing to the remote topic

In the processor stack, we will be getting the reference to the relevant topics as follows.



const remoteStackEventTargetDlqSns = Topic.fromTopicArn(
    this,
    `remoteStackEventTargetDlqSns-${region}-${account}`,
    `arn:aws:sns:${region}:${account}:remoteStackEventTargetDlqSns`
);



Enter fullscreen mode Exit fullscreen mode

Subscribing to the remote topic

Here we will be subscribing to the processor region dlq to receive the messages from the remote region SNS topic as follows.

Note it is highly recommended to subscribe from the consumer stack so that the subscription gets auto-confirmed, else there will be another confirmation step you may need to do from the console or confirmation message to do that yourself.



const subProps: SqsSubscriptionProps = {
          rawMessageDelivery: true,
};

remoteStackEventTargetDlqSns.addSubscription(
    new aws_sns_subscriptions.SqsSubscription(
      stackEventTargetDlq.queue,
      subProps
    )
);


Enter fullscreen mode Exit fullscreen mode

The above subscription setup from the processor stack also grants the sqs:SendMessage implicitly while the subscription is created.

topic sub

subscription details

Conclusion โ›ฒ

With this approach just like how we pooled the remote cfn events to a common event bridge across regions and accounts, we are also able to get the remote dlq events to a common dlq. These messages in dlq can be inspected without switching to another region or account, which the maintainer doesn't have any access.

This will be extremely useful when you build similar event-driven solutions.

We will be talking about more similar engineering concepts as we refactor and refine the event forwarder project. Keep following for similar posts on engineering with IaC primarily using AWS CDK and Serverless.

Also, feel free to contribute to the progress of the below solution with your comments, and issues, maybe you can also do a pr if you feel it can help our community.

event-forwarder Github repo

arch

๐Ÿ” Original project post at ๐Ÿ”— Dev Post

๐Ÿ” Reposted project post at ๐Ÿ”— dev to @aravindvcyber

โญ We have our next article in serverless and IaC, do check out

https://dev.to/aws-builders/aws-cdk-101-sam-local-to-test-and-debug-lambda-function-1afj

๐ŸŽ‰ Thanks for supporting! ๐Ÿ™

Would be great if you like to โ˜• Buy Me a Coffee, to help boost my efforts ๐Ÿ˜.

Buy Me a Coffee at ko-fi.com

๐Ÿ” Original post at ๐Ÿ”— Dev Post

๐Ÿ” Reposted at ๐Ÿ”— dev to @aravindvcyber

Top comments (0)