DEV Community

Cover image for Git - An Overview at High-Level
Vinoth Mohan
Vinoth Mohan

Posted on • Updated on

Git - An Overview at High-Level

What is GIT?

Git is a free and open-source distributed version control system for tracking changes in computer files and is used to help coordinate work among several people on a project while tracking progress over time. In other words, it’s a tool that facilitates source code management in software development.

Git favors both programmers and non-technical users by keeping track of their project files. It enables multiple users to work together and handles large projects efficiently.

What do you understand by the term ‘Version Control System’?

A version control system (VCS) records all the changes made to a file or set of data, so a specific version may be called later if needed.

This helps ensure that all team members are working on the latest version of the file

Uses of Git

  • Git is used to tracking changes in the source code.
  • Distributed version control tool used for source code management.
  • Allows multiple developers to work together.
  • Supports non-linear development because of its thousands of parallel branches.

Features of Git

  • Free and open-source
  • Tracks history
  • Supports non-linear development
  • Creates backup
  • Scalable
  • Supports collaboration
  • Branching is easier
  • Distributed development.

Git WorkFlow

The following image shows the git workflow diagram:

git-workflow_diagram

In Git, the workflow is mainly divided into three areas -

  • Working directory - This is the area where you modify your existing files.
  • Staging area (Index) - In this, the files in your working directory are staged and snapshots are added.
  • Git directory or repository - It is basically where you perform all the changes that need to be made i.e. perform commits to branch, checkout branch, make changes etc.

Git Init

git init is one way to start a new project with Git. To start a repository, use either git init or git clone - not both.

git init
Enter fullscreen mode Exit fullscreen mode

Git Clone

  • git clone is a command which is used to clone or copy a target repository.
git clone <REPO_URL>
Enter fullscreen mode Exit fullscreen mode
  • Clone a specific branch from the repository.
git clone -b <Branch_name> <Repo_URL>
Enter fullscreen mode Exit fullscreen mode

Git Status

git status is mainly used to display the state of the staging area and the repository. It helps us to track all the changes made, point out untracked files.

git status
Enter fullscreen mode Exit fullscreen mode

Git Add

The git add command adds new or changed files in your working directory to the Git staging area.

git add is an important command - without it, no git commit would ever do anything.

git add <file_name>or<path>
Enter fullscreen mode Exit fullscreen mode

To add all the changes

git add .
Enter fullscreen mode Exit fullscreen mode

Git Commit

Git commit is used to record all the changes in the repository. The git commit will commit all the changes and make a commit-id for the same for tracking down the changes made as shown in the image below.

Git_commit

As shown in the image, the command git commit creates a commit-id to track down changes and commits all the changes to the git repository.

Command:

git commit
git commit -m
Enter fullscreen mode Exit fullscreen mode
  • The -m along with the command lets us write the commit message on the command line.

Command:

git commit -m "Commit message"
git commit -am
Enter fullscreen mode Exit fullscreen mode
  • The -am along with the command is to write the commit message on the command line for already staged files.

Command:

git commit -am "Commit message"
git commit -amend
Enter fullscreen mode Exit fullscreen mode
  • The amend is used to edit the last commit. In case we need to change the last committed message, this command can be used.

Command:

git commit -amend
Enter fullscreen mode Exit fullscreen mode
  • rm stands for remove. It is used to remove a collection of files. The git rm command is used to remove or delete files from the working tree and index.

Command:

git rm <file_name>
Enter fullscreen mode Exit fullscreen mode

Now, if you use the command git status, it would show, that the file has been deleted.

Git Branch

  • A branch in Git is used to keep your changes until they are ready.
  • You can do your work on a branch while the main branch(main) remains stable. After you are done with your work, you can merge it to the main branch.

  • For creating a new branch, the following command is used :

git branch <branch_name>
Enter fullscreen mode Exit fullscreen mode
  • For switch from one branch to another.
git checkout <branch_name>
Enter fullscreen mode Exit fullscreen mode
  • Create a local branch and switch to that branch:
git checkout -b <branch_name>
Enter fullscreen mode Exit fullscreen mode
  • Push in the local branch:
git push -u origin <branch_name>
Enter fullscreen mode Exit fullscreen mode

Note: origin is the default name of remote repository

  • Now, if someone wants to fetch some information, one can simply run:
git fetch
Enter fullscreen mode Exit fullscreen mode

Delete Branches

Once the work is done on a branch and merged with the Main branch, one can delete the branch.

  • The following command is used to delete branches:
git delete -d <branch_name>
Enter fullscreen mode Exit fullscreen mode

Note: This command deletes a copy of the branch, but the original branch can still exist in remote repositories.

  • To delete remote branches, use the following command:
git push origin --delete <branch_name>
Enter fullscreen mode Exit fullscreen mode

Git Checkout

The Git checkout is used to command Git on which branch changes have to be made. Checkout is simply used to change branches in repositories. It can also be used to restore files.

git checkout <branch_name>
Enter fullscreen mode Exit fullscreen mode
  • Git Checkout Branch To checkout or create a branch, the following command can be used:
git checkout -b  <branch_name>
Enter fullscreen mode Exit fullscreen mode

This will simply switch to the new branch branch_name.

  • Git Checkout Tag While working on a large codebase, it because easy to have some reference point. That is where the checkout tag is used.

The following command is used to specify the tagname as well as the branch that will be checked out.

git checkout tag</tag> <branch_name>
Enter fullscreen mode Exit fullscreen mode

Git Merge

Git merge is a command that allows you to merge branches from Git. It preserves the complete history and chronological order and maintains the context of the branch.

The following image demonstrates how we can create different features by branching from the main branch and how we can merge the newly created features after the final review to the main branch.

Git_Merge

  • The command git merge is used to merge the branches.

Command :

git merge <branch_name>
Enter fullscreen mode Exit fullscreen mode

GIT Rebase

Git Rebase is a process of combining a sequence of commits to a new base commit.

  • The primary reason for rebasing is to maintain a linear project history.
  • When you rebase, you ‘unplug’ a branch and ‘replug’ it on the tip of another branch(usually main).
  • The goal of rebasing is to take all the commits from a feature branch and put it on the main branch.

The following rebase command is used for rebasing the commits:

git rebase <branch_name>
Enter fullscreen mode Exit fullscreen mode

Git Push

The git push command is used to upload local repository content to a remote repository. Pushing is how you transfer commits from your local repository to a remote repo.

git push <remote> <branch>
Enter fullscreen mode Exit fullscreen mode

Push the specified branch to , along with all of the necessary commits and internal objects. This creates a local branch in the destination repository. To prevent you from overwriting commits, Git won’t let you push when it results in a non-fast-forward merge in the destination repository.

git push <remote> --force
Enter fullscreen mode Exit fullscreen mode

Same as the above command, but force the push even if it results in a non-fast-forward merge. Do not use the --force flag unless you’re absolutely sure you know what you’re doing.

git push <remote> --all
Enter fullscreen mode Exit fullscreen mode

Push all of your local branches to the specified remote.

git push <remote> --tags
Enter fullscreen mode Exit fullscreen mode

Tags are not automatically pushed when you push a branch or use the --all option. The --tags flag sends all of your local tags to the remote repository.

Git Fetch

Git Fetch only downloads the latest changes into the local repository. It downloads fresh changes that other developers have pushed to the remote repository since the last fetch and allows you to review and merge manually at a later time using Git Merge. As it doesn’t change the working directory or the staging area, it is safe to use.

The below illustration shows the working of the command git fetch. It fetches all the latest changes that have been made in the remote repository and lets us make changes accordingly.

Git_Fetch

The command used is :

git fetch <branch_name>
Enter fullscreen mode Exit fullscreen mode

Git Pull Remote Branch

You can pull in any changes that have been made from your forked remote repository to the local repository.

Using the git pull command, all the changes and content can be fetched from the remote repository and can be immediately updated in the local repository to match the content.

  • We can simply pull a remote repository by using the git pull command. The syntax is as follows:
git pull
Enter fullscreen mode Exit fullscreen mode

This command is equivalent to

git fetch origin head
Enter fullscreen mode Exit fullscreen mode
  • Use the following command to check if there has been any change:
git pull <RemoteName> <BranchName>
Enter fullscreen mode Exit fullscreen mode

If there is no change, it will show “Already up to date”. Else, it will simply merge those changes in the local repository.

Git Stash

Sometimes in large codebases, there might be some cases when we do not want to commit our code, but at the same time don’t want to lose the unfinished code. This is where git stash comes into play. The git stash command is used to record the current state of the working directory and index in a stash.

It stores the unfinished code in a stash and cleans the current branch from any uncommitted changes. Now, we can work on a clean working directory.

If in the future, we again need to visit that code, we can simply use the stash and apply those changes back to the working repository.

As shown below, using the command git stash, we can temporarily stash the changes we have made on the working copy and can work on something else. Later, when needed, we can git stash pop and again start working on it.

Git_Stash

How to stash changes in Git?

  • The syntax for stashing is as follows:
git stash
Enter fullscreen mode Exit fullscreen mode

Suppose, you are working on a website and the code is stored in a repository.

Now let's say, you have some files named design.css and design.js. Now you want to stash these files so that you can again use them later, while you work on something else.

Therefore, later you can use the git stash list command to view all the changes.

Drop Stash

  • In case, you no longer require a stash, you can delete it with the following command:
git stash drop <stash_id>
Enter fullscreen mode Exit fullscreen mode
  • If you want to delete all the stashes, simply use:
git stash clear
Enter fullscreen mode Exit fullscreen mode

Git-Ignore

At times, there are some files that we might want Git to ignore while commiting. For example, private files or folders containing passwords, APIs etc. These files are user-specific and hence, we can ignore these using the .gitignore.

.gitignore is generated automatically inside the project directory and ignores the files to get committed to the repositories.

  • How to use the .gitignore?

Follow the below steps to use add the files you want Git to ignore.

  1. Open your project directory on your PC.
  2. Create a .gitignore file inside it.
  3. Inside the .gitignore write the names of all the files you want Git to ignore.
  4. Now add the .gitignore in your repository.

Now, if you check the status of your repo, you will see, all the files which were written in the .gitignore file have been ignored.

Advanced Git Concepts

git pull --rebase

Git rebase is used to rewrite commits from one branch to another branch. In order to combine unpublished local changes with the published remote changes, git pull is performed.

With git pull --rebase, the unpublished changes will be again applied on the published changes and no new commit will be added to history.

git merge --squash

The squash along with git merge produces the working tree. It indexes in the same way as that of the real merge but discards the merge history.

Command:

git merge --squash origin/main
Enter fullscreen mode Exit fullscreen mode

When to use git merge --squash?

  • When you have merged main into your branch and resolved conflicts.
  • When you need to overwrite the original commits.

git reflog

The reflog records every change that is made in the repository. Apart from this, if some branch is lost from the repo, the recovery can be done using this command.

git revert

Revert simply means to undo the changes. Therefore, it is an undo command in Git. Unlike traditional undo operation, the revert command does not delete any data. git revert is a commit operation, as it undo the specified commit.

Options:

  • This option is used to revert back a commit.
git revert <commit_id>
Enter fullscreen mode Exit fullscreen mode
  • Edit commit message before reverting commit: In case, we want to edit the commit message before reverting, -e is used for the same.
git revert -e <commit_id>
Enter fullscreen mode Exit fullscreen mode

git bisect

Git bisect is a git tool used for debugging. Suppose, you have a large codebase and some commit causes a bug, but you are not sure of which commit causes it.

Git bisect goes through all the previous commits and uses binary search to find the bugged commit.

It is applied as follows:

  1. git bisect start - Starts the bisect
  2. git bisect good v1.0 - Mention the last working commit.
  3. git bisect bad- Mentioning that the current commit has a bug. It will return the commit which causes the bug and one can debug the issue efficiently.

git blame

git blame is used to know who/which commit is responsible for the latest changes in the repository. The author/commit of each line is visible through this.

git blame <file_name>
Enter fullscreen mode Exit fullscreen mode

This command shows the commits which are responsible for changes of all lines of code.

git cherry-pick

Choosing a commit from one branch and applying it to another is known as cherry picking in Git. Following are the steps to cherry pick a commit:

  • Visit the branch you want to apply to commit and use the following command:
 git switch master
Enter fullscreen mode Exit fullscreen mode
  • Run the following command:
git cherry-pick <commit_id>
Enter fullscreen mode Exit fullscreen mode

Git Submodules

Submodules are a tool that allows attaching an external repository inside another repository at a specific path. It allows us to keep a git repository as a subdirectory of another git repository.

Commands:

  • Add git submodule: This takes the git URL as the parameter and clones the pointer repo as a submodule. The syntax to add git submodule is:
git submodule add <URL_link>
Enter fullscreen mode Exit fullscreen mode
  • git submodule init git submodule init is to copy the mapping from .gitmodules file into ./.git/config file. git submodule init has extend behavior in which it accepts a list of explicit module names.

This enables a workflow of activating only specific submodules that are needed for work on the repository.

Command:

git submodule init
Enter fullscreen mode Exit fullscreen mode

Git Subtrees

git subtree lets you nest one repository inside another as a sub-directory. It is one of several ways Git projects can manage project dependencies.

git-subtree is a wrapper shell script to facilitate a more natural syntax. This is actually still a part of contrib and not fully integrated into git with the usual man pages.

A subtree is just a subdirectory that can be committed to, branched from, and merged along with your project in any way you want.

Commands:

  • add: Let’s assume that you have a local repository that you would like to add an external vendor library to. In this case we will add the git-subtree repository as a subdirectory of your already existing git-extensions repository in ~/git-extensions/:
git subtree add --prefix=git-subtree --squash \<Git_repo_link>
Enter fullscreen mode Exit fullscreen mode
  • pull : It is similar to pull from the repository with added prefix. Command:
git subtree pull --prefix <URL_link>
Enter fullscreen mode Exit fullscreen mode

Git Submodules VS Subtrees

Git Submodules Git Subtrees
It is a link to a commit ref in another repository Code is merged in the outer repository’s history
Requires the submodule to be accessible in a server (like GitHub) Git subtree is decentralised, which basically means that its components are shared across a bunch of linked computers.
Git submodule is a better fit for component-based development, where your main project depends on a fixed version of another component (repo). Git subtree is more like a system-based development, where your all repo contains everything at once, and you can modify any part.
Suitable for smaller repository size Suitable for bigger repository size

Git Commands

S. No Command Name Use
1 git init Initialise a local Git Repository
2 git add. Add one or more files to the staging area
3 git commit -m “Commit Message” Commit changes to the head but not to the remote repository.
4 git status Check the status of your current repository and list the files you have changed.
5 git log Provides a list of all commits made on a branch
6 git diff View the changes you have made to the file
7 git push origin Push the branch to the remote repository so that others can use it.
8 git config --global user.name “Name” Tell Git who you are by configuring the author name
9 git config --global user.email user@email.com Tell Git who you are by configuring the author email id.
10 git clone Creates a Git repository copy from a remote source
11 git remote add origin Connect your local repository to the remote server and add the server to be able to push it.
12 git branch Create a new branch
13 git checkout Switch from one branch to another
14 git merge Merge the branch into the active branch
15 git rebase Reapply commits on top of another base tip
16 git checkout -b Creates a new branch and switch to it
17 git stash Stash changes into a dirty working directory
18 git pull Update local repository to the newest commit
19 git revert Revert commit changes
20 git clean -n Shows which files would be removed from working directory. Use the -f flag in place of the -n flag to execute the clean.
21 git log --summary View changes (detailed)
22 git diff HEAD Show difference between working directory and last commit.
23 git log --oneline View changes (briefly)
24 git reflog Show a log of changes to the local repository’s HEAD. Add --relative-date flag to show date info or --all to show all refs.
25 git rebase -i Interactively rebase current branch onto . Launches editor to enter commands for how each commit will be transferred to the new base.
26 git restore --staged Resetting a staged file
27 git rm -r [File_name] Remove a file (or folder)
28 git config --list List all variables set in config file, along with their values
29 git branch -d Delete local branch in Git
30 git push -d Delete remote branch in Git
31 git stash pop Unstash the changes
32 git commit -am The -am along with the command is to write the commit message on the command line for already staged files.
33 git commit -amend The amend is used to edit the last commit. Incase we need to change the last committed message, this command can be used.
34 git rm The git rm command is used to remove or delete files from working tree and index.
35 git pull --rebase Git rebase is used to rewrite commits from one branch to another branch.
36 git merge --squash The squash along with git merge produces the working tree. It indexes in the same way as that of the real merge, but discards the merge history.
37 git revert -e edit the commit mesage before reverting, -e is used for the same.
38 git bisect Git bisect goes through all the previous commit and uses binary search to find the bugged commit.
39 git blame git blame is used to know who/which commit is responsible for the lastest changes in the repository.
40 git cherry-pick Choosing a commit from one branch and applying it to another is known as cherry picking in Git.

Top comments (0)