DEV Community

Hong Qiu for Solace Developers

Posted on • Originally published at solace.com on

How to Build a Simple Chat App with Solace (Part 5)

Further thoughts on FPGA co-processing and performance

This is the fifth of a series of blog posts in which I walk through the creation of a simple chat app with Solace PubSub+. In the last part, I explained how to add a simple authentication server and send a REST POST request as a Publish/Subscribe type of message. In this tutorial, you will learn how to send a REST POST request as a request/reply message. Specifically, you will learn how to:

  • Modify the sample code
  • Connect the authentication server
  • Change the login response message
  • Test the authentication and response message

Prerequisite

Level

  • Beginner

Modify the Sample Code

The accompanying sample code for this tutorial is for sending a REST POST request as a Publish/Subscribe message. Since you will send a REST POST request as a Request/Reply message instead this time, you need to modify the sample code.

To modify the sample code, do the following:

  1. In your code editor, check out the developer-exercise-5 branch or in your command line, enter git checkout remotes/origin/developer-exercise-5 -f
  2. In your code editor, open the file SolaceCloudProxy.java
  3. Enter the following highlighted code to the section that determines a response to the Http Request to set the Solace reply wait time in milliseconds (Line 56).
//This header determines that the Http Request needs a responseset(“Solace-Reply-Wait-Time-In-ms”,”3000”);
Enter fullscreen mode Exit fullscreen mode

The Solace-specific HTTP header “Solace-Reply-Wait-Time-In-ms” specifies that the message exchange pattern is Request/Reply and the Solace message broker application must wait for the specified timeout value (e.g. 3 seconds) for a reply before it stops.

Learn about Solace-Reply-Wait-Time-In-ms.

  1. Modify the REST template POST request in the section that passes through a response code to expect a response of an authenticated object and to retrieve authenticatedObject from the call (Line 68).
//Pass through a response code based on the result of the REST-ful requestAuthenticatedObject authenticatedObject = restTemplate.postForObject(solaceRESTHost + “/LOGIN/MESSAGE/REQUEST”, request, AuthenticatedObject.class);
Enter fullscreen mode Exit fullscreen mode

“AuthenticatedObject” is defined in the AuthenticatedObject.java file under solace-chat-common. It validates a client and determines whether to allow it to connect or not.

  1. Under the above modified code line, enter the following code to define what message the client will get when their request is allowed or denied (Lines 70-73).
if (authenticatedObject.isAuthenticated()) { return new ResponseEntity(HttpStatus.OK);}else { return new ResponseEntity(HttpStatus.FORBIDDEN);}
Enter fullscreen mode Exit fullscreen mode

Connect the Authentication Server

To connect the authentication server to the PubSub+ instance, you need to define the connection details.

  1. In the auth-server directory, copy and paste the application-template.properties file under src > main > resources.
  2. Rename the copied file to application.properties.
  3. Log in to Solace PubSub+ Cloud and click the *Connect * tab.
  4. Open the Solace Messaging section.
  5. From the Connection Details on the right, copy the following:
    • Username
    • Password
    • Message VPN
    • SMF Host
  6. Paste the connection details to the application.properties file.

Change the Login Response Message

When you receive a request to log in to the chat application, you need to authenticate the user and then send the response back to the application. To change the login response message, follow the steps below:

    1. In the auth-server directory, open the LoginMessageReplier.java file.
    2. Enter the following highlighted code to add the session subscription (Line 92). //Add the session subscription here session.addSubscription(JCSMPFactory.onlyInstance().createTopic( REQUEST_TOPIC), true);
    3. In the createReplyMessage method, enter the following highlighted code to create a message object for the reply message and then convert the Json text in the request message to a user object type (Line 110).
private XMLMessage createReplyMessage(TextMessage request) throws JCSMPException { TextMessage replyMessage = JCSMPFactory.onlyInstance().createMessage(TextMessage.class); UserObject userObject = gson.fromJson(request.getText(), UserObject.class);}
Enter fullscreen mode Exit fullscreen mode
  1. Under the above code lines, enter the following highlighted code to validate the user and print out the message depending on the result of the validation (Lines 113 to 119).
private XMLMessage createReplyMessage(TextMessage request) throws JCSMPException { TextMessage replyMessage = JCSMPFactory.onlyInstance().createMessage(TextMessage.class); UserObject userObject = gson.fromJson(request.getText(), UserObject.class); //Validate the user boolean validUser = credentialsRepository.isValidUser(userObject.getUsername(), userObject.getPassword());if (validUser) System.out.println(“Successfully validated a user”);else System.out.println(“Authentication failed”);}
Enter fullscreen mode Exit fullscreen mode
  1. Enter the following highlighted code to create an AuthenticatedObject type, set the reply message content type, set the text, and set the delivery mode (Lines 120 to 127).
if (validUser) System.out.println(“Successfully validated a user”);else System.out.println(“Authentication failed”);AuthenticatedObject authenticatedObject = new AuthenticatedObject();authenticatedObject.setAuthenticated(validUser);replyMessage.setHTTPContentType(“application/json”);replyMessage.setText(gson.toJson(authenticatedObject));replyMessage.setApplicationMessageId(request.getApplicationMessageId());replyMessage.setDeliverToOne(true);replyMessage.setDeliveryMode(DeliveryMode.DIRECT);return replyMessage;}
Enter fullscreen mode Exit fullscreen mode

Test the Authentication and Response Message

To test the authentication and login request response message, follow these steps:

  1. In your code editor, type mvn spring-boot:run to run the Web application.
  2. Open a new terminal window, change the directory to .\auth-server\, and type mvn spring-boot:run to run the authentication server.
  3. In your Web browser, type localhost:8081 to view the application.
  4. Log in with a username and a password that are preset in the HashMapCredentialRepository.java file under the server directory in auth-server (e.g. ValidUser; solace). This should bring you to the chat application page.
  5. Refresh your browser and log in with an invalid username and an invalid password. You should see the “Login Failed” error message.

Congratulations! You now have a chat application that allows you to authenticate your user with a request/reply message pattern.

In the next part (coming soon), you will learn how to modify the Web application to load balance requests.

Related

The post How to Build a Simple Chat App with Solace (Part 5) appeared first on Solace.

Top comments (0)