Kubernetes
Kubernetes is the de facto
standard for running containerized applications.
Kubernetes (K8s) is an open-source system for
automating deployment
,scaling
, andmanagement
of containerized applications.
Kubernetes makes it easy to deploy and run containerized applications. Kubernetes is simple to use.
Kubernetes is complex to understand because it provides a huge set of options to make your deployment easier.
Aptly named, Kubernetes is a pilot (or) helmsman that helps you to sail the container world. Kubernetes is a portable and extensible system built by the community for the community.
As Kelsey, correctly quotes
Kubernetes does the things that the very best system administrator would do automation, failover, centralized logging, monitoring. It takes what we’ve learned in the DevOps community and makes it default, out of the box.
In order to work with Kubernetes, it is very important to understand
- How Kubernetes works?
- How Kubernetes is architected?
- What are the various components in Kubernetes?
Let us start hacking on Kubernetes.
How does Kubernetes work?
The Kubernetes run in a highly available cluster mode. Each Kubernetes cluster consists of one or more master node and a few worker nodes.
Master Node
The master node consists of an API server, Scheduler, Controllers, etcd. This node is called the control plane
of Kubernetes. This control plane is the brain
of Kubernetes.
That is the control plane is responsible for all the actions inside Kubernetes.
Via the API server
, we can instruct the Kubernetes or get information from the Kubernetes.
The Scheduler
is responsible for scheduling the pods.
The controllers
are responsible for running the resource controllers.
The etcd
is a storage for the Kubernetes. It is key-value storage.
Node
The worker nodes have a Kubelet and proxy.
The Kubelets are the actual workhorse and the Kube-proxy handles the networking.
Working
We provide the yaml
file to the Kubernetes cluster through kubectl apply
command.
The apply
command calls the API server, which will send the information to the controller
and simultaneously stores the information to the etcd
.
The etcd
then replicate this information across multiple nodes to survive any node failure.
The controller
will check whether the given state matches the desired state. If it is not it initiates the pod deployment, by sending the information to the scheduler
The checks are called as the reconciliation loop that runs inside the Kubernetes. The job of this loop is to validate whether the state requested is maintained correctly. If the expected state and actual states mismatch this loop will do the necessary actions to convert the actual state into the expected state.
The scheduler
has a queue inside. Once the message is received in the queue.
The scheduler
will then invoke the kubelet to do the intended action such as deploying the container.
This is a 10000 feet bird view of how Kubernetes does the deployment.
There are various components inside the Kubernetes. Let us take a look at what are they and how are they useful.
Components of Kubernetes
Pods
In general terms, pods are nothing but a group of dolphins or whales.
Similarly, in Kubernetes world, pods
are a group of containers living together. A pod may have one or more containers in it.
The pod
is the smallest unit of deployment in Kubernetes. Usually, the containers that cannot live outside the scope of another container are grouped to form a pod.
This is how you define a pod in Kubernetes.
apiVersion: v1
kind: Pod
metadata:
name: myapp-pod
labels:
app: myapp
spec:
containers:
- name: myapp-container
image: busybox
command: ['sh', '-c', 'echo Hello Kubernetes! && sleep 3600']
- apiVersion denotes the Kubernetes cluster which version of API to use when parsing and executing this file.
- kind defines what is the kind of Kubernetes object, this file will refer to.
- metadata includes all the necessary metadata to identify the Pod.
- spec includes the container information.
Deployments
While pods are the unit of deployment. For an application to work, it needs one or more pods. Kubernetes considers this entire set as deployment.
Thus deployment is recorded information about pods. Kubernetes uses this deployment information to manage and monitor the applications that are deployed in them.
The below file is the sample deployment file that tells the Kubernetes to create a deployment of nginx
using the nginx:1.7.9
container.
apiVersion: apps/v1
kind: Deployment
metadata:
name: nginx-deployment
labels:
app: nginx
spec:
replicas: 3
selector:
matchLabels:
app: nginx
template:
metadata:
labels:
app: nginx
spec:
containers:
- name: nginx
image: nginx:1.7.9
ports:
- containerPort: 80
Replicasets
While deployment tells the Kubernetes what containers are needed for your application and how many replicas to run. The replica sets
are the ones that ensure those replicas are up and running.
ReplicaSet is responsible for managing and monitoring the replicas.
StatefulSet
Often times we will need to have persistent storage or permanent network identifiers or ordered deployment, scaling, and update. During those times we will use StatefulSets
.
You can define the StatefulSet like below:
apiVersion: apps/v1
kind: StatefulSet
metadata:
name: web
spec:
selector:
matchLabels:
app: nginx # has to match .spec.template.metadata.labels
serviceName: "nginx"
replicas: 3 # by default is 1
template:
metadata:
labels:
app: nginx # has to match .spec.selector.matchLabels
spec:
terminationGracePeriodSeconds: 10
containers:
- name: nginx
image: k8s.gcr.io/nginx-slim:0.8
ports:
- containerPort: 80
name: web
volumeMounts:
- name: www
mountPath: /usr/share/nginx/html
volumeClaimTemplates:
- metadata:
name: www
spec:
accessModes: [ "ReadWriteOnce" ]
storageClassName: "my-storage-class"
resources:
requests:
storage: 1Gi
We mounted the volume and also claimed the volume storage.
DaemonSet
Sometimes you need to run a pod on every node of your Kubernetes cluster. For example, if you are collecting metrics from every node, then we will need to schedule some pods on every node that collects the metrics. We can use DaemonSet for those nodes.
Services
The deployments define the actual state of the application running on the containers. Users will need to access the application or you might need to connect to the container to debug it. Services will help you.
The services are the Kubernetes object that provides access to the containers from the external world or between themselves.
We can define the service like below:
apiVersion: v1
kind: Service
metadata:
name: my-service
spec:
selector:
app: MyApp
ports:
- protocol: TCP
port: 80
targetPort: 9376
The above service
maps incoming connections on port 80
to the targetPort 9376
.
You can consider the services as the load balancer, proxy or traffic router in the world of Kubernetes.
Networking
This is the most important element of Kubernetes. The pods running should be exposed to the network. The containers that are running inside the pods should communicate between themselves and also to the external world.
While service provides a way to connect to the pods, networking determines how to expose these services.
In Kubernetes we can expose the service through the following ways:
- Load Balancer
- The Load Balancer provides an external IP through which we can access the pods running inside.
- The Kubernetes will start the services and then
asynchronously
starts a load-balancer.
- Node Port
- Each of the services will have a dynamically assigned port.
- We can access the services using the Kubernetes master IP.
- Ingress
- Each of the services will have a separate address.
- These services are then accessed by an ingress controller.
- The ingress controller is not a public IP or external IP.
Secrets
Often for the applications, we need to provide passwords, tokens, etc., Kubernetes provides secrets
object to store and manage the sensitive information. We can create a secret like below:
apiVersion: v1
kind: Secret
metadata:
name: mysecret
type: Opaque
stringData:
config.yaml: |-
apiUrl: "https://my.api.com/api/v1"
username: {{username}}
password: {{password}}
Best practices
While Kubernetes is an ocean and whatever we have seen is just a drop in it. Since Kubernetes supports a wide range of applications and options, there are various different options and features available.
Few best practices to follow while working with Kubernetes are:
Make smaller YAML
The yaml
files are the heart of Kubernetes configuration.
We can define multiple Kubernetes configurations in a single yaml
. While yaml
reduces the boilerplate when compared with JSON
. But still yaml
files are space-sensitive and error-prone.
So always try to minimize the size of yaml
files.
For every service, deployment, secrets, and other Kubernetes objects define them in a separate yaml
file.
Split your yaml files into smaller files.
The single responsibility principle
applies here.
Smaller and Fast boot time for images
Kubernetes automatically restarts the pods when there is a crash or upgrade or increased usage. It is important to have a faster boot time for the images. In order to have a faster boot time, we need to have smaller images.
Alpine images are your friends. Use the Alpine images as the base and then add in components or libraries to the images only when they are absolutely necessary.
Always remember to have smaller image sizes. Use
builder pattern
to create the images from Alpine images.
Healthy - Zombie Process
Docker containers will terminate only when all the processes running inside the container are terminated. The Docker containers will return healthy
status even when one of the processes is killed. This creates a Healthy-Zombie
process.
Try to have a single process inside the container. If running a single process is not possible then try to have a mechanism to figure out whether all the required processes are running.
Clean up unused resources
In the container world, it is quite common to have unused resources occupying the memory. It is important to ensure the resources are properly cleaned.
Think about Requests & Limits
Ensure that requests and limits are properly specified for all the containers.
resources:
requests:
memory: "100Mi"
cpu: "100m"
limits:
memory: "200Mi"
cpu: "500m"
The requests
are the limits that the container is guaranteed to get. The limits
are is the maximum or minimum resource a container is allowed to use.
Each container in the pod can request and limit their resources.
RED / USE pattern
Monitor and manage your services using RED
pattern.
- Requests
- Errors
- Duration
Track the requests, errors in the response and the duration to receive the response. Based on this information, tweak your service to receive optimum performance.
For the resources, use the USE
pattern.
- Utilization
- Saturation
- Errors
Monitor the resource utilization and how much the resources are saturated and what are the errors. Based on this information, tweak your resources to optimize resource allocation.
Hopefully, this might have given you a brief overview of Kubernetes
. Head over kubernetes.io for more information on Kubernetes.
Now you want deploy a sample application on top of Kubernetes with Istio check out this post.
You can follow me on Twitter.
If you like this article, please leave a like or a comment. ❤️
Top comments (21)
Great article! If you want to try out some of these kubectl commands, I run KubeSail which gives you a small free slice of our powerful, security-hardened Kubernetes cluster. You get full access to the Kube API, so you should be able to follow along and try applying all of the YAML in this tutorial.
Love the article, how you summarized the main K8s components and explained them in your own language. Especially the Services and Networking part that can be fuzzy ;)
Good job!
We need more like this one.
I hope the next one is on PV ;)
Thanks
It is not necessary to use alpine to minimize resources. There are easy ways to build image "from scratch". Like mount your empty image and put your staff in, for example
dnf install --installroot...
just remember you'll need ca-certs if you're doing any tls in your container
oh.. that sounds interesting. I will take it a spin. Thanks 👍🙂
I can recommend you some useful tools
Thank you for the detailed article Sendil. I was thinking of doing this exact thing but you beat me to the punch. :D. Very well done. Keep up the good work.
Oops, sorry about that :). Between thanks.
Can't help recalling that each time I see anything on Kubernetes...
Thanks a lot for this great article.
Jus a little correction i think: "Alphine" should be "Alpine"
Thanks I updated 👍
Great and simple overview ... if you cover k8s rbac at some point - check this open source tool
github.com/alcideio/rbac-tool
Thanks :) will take a look :)
Thank you for that article!
Thanks :)
Great easy read, thanks Sendil!
Sorry, this is really not "for everyone". You just bombard the reader with an enormous amount of new concepts that are nowhere introduced nor defined. I don't doubt that this helps people who already know all these terms to systematize their knowledge, but calling it "for everyone" is really wrong.
This is a good one. Ideally I expect how Kubernetes works part to be for everyone except for few jargons like
pods
. And have an explanation for them.May be I should have named it
Kubernetes for anyone who knows Docker
?How about instead of calling something wrong, can you share the list of things that you feel needs an explanation. (feel free to comment) let us make this post for everyone :)
Well, you could start with explaining Kubernetes relies on Docker containers and how it's all related. I dug a little bit around Docker and Kubernetes seemed to appear here and there but I didn't have time to look it closer. So now I thought good maybe here I will know what's it all about. But here not a word about Kubernetes and Docker connection...
Yes, that's probably it. I really don't know anything about Docker. But that's also a part of the problem: you mention Docker only after 85% of your article, and of course I didn't get to there.
I tried. But there's too much of it, and the article is really long. As I said above, the fact that you didn't even mention Docker for 5/6ths of your article is illustrative. Probably it would need a thorough rewrite, and it still wouldn't be worth it.
Hmm, I'm working with Docker and compose for a year or two but I have to admit i still don’t really understand the differences between pods, services, deployments and load balancing strategies.
For every section i thought, “oh this is interesting” and then the section was over and i did not really get it.
I think it’s hard to cover such a complex technology in an article but maybe you could have made up one example application that you’ve built with Kubernetes and explain the details along it.