DEV Community

Franck Pachot for YugabyteDB Distributed PostgreSQL Database

Posted on • Updated on

Scaling Token Buckets Rate limiting with YugabyteDB

In the Part 4 of this series, I've run my RateLimitDemo.java program on PostgreSQL in Amazon RDS with and without updating the same rows, in Read Committed and Serializable isolation. The results were:

  • rate: 1000 token/s (100% transactions successful) with 50 threads on different ids in Read Committed isolation level
  • rate: 930 token/s (100% transactions successful) with 50 threads on different ids in Serializable isolation level
  • rate: 124 token/s (100.00% transactions successful) with 50 threads on the same ids in Read Committed isolation level
  • rate: 218 token/s (83% transactions successful) with 10 threads on the same ids in Serializable isolation level

YugabyteDB Cloud

In the same idea of using a managed service I've created a 3 nodes YugabyteDB cluster on AWS through the Yugabyte DBaaS:

YugabyteDB cloud

YugabyteDB READ COMMITTED different id

In my RateLimitDemo.java I change the id to concatenate the session pid: rate_limiting_request(?||pg_backend_pid(),?) and I set Read Committed isolation level: connection.setTransactionIsolation(Connection.TRANSACTION_READ_COMMITTED)

java RateLimitDemo 50 "jdbc:yugabytedb://47cc8863-9344-4a9c-bc02-0dd9f843dceb.cloudportal.yugabyte.com/yugabyte?user=admin&password=Covid-19" "user2" 1000 20 | awk 'BEGIN{t=systime()}/remaining$/{c=c+1;p=100*$5/$3}NR%100==0{printf "rate: %8.2f/s (last pct: %5.2f) max retry:%3d\n",c/(systime()-t),p,retry}/retry/{sub(/#/,"",$6);if($6>retry)retry=$6}'
Enter fullscreen mode Exit fullscreen mode

The Read Committed is provided for PostgreSQL compatibility but is not recommended, so I'm just showing that the rate is the same as with PostgreSQL:

rate:  1063.08/s (last pct: 100.00) max retry:  1
rate:  1063.32/s (last pct: 100.00) max retry:  1
rate:  1063.56/s (last pct: 100.00) max retry:  1
rate:  1063.80/s (last pct: 100.00) max retry:  1
rate:  1064.05/s (last pct: 100.00) max retry:  1
rate:  1064.29/s (last pct: 100.00) max retry:  1
rate:  1064.53/s (last pct: 100.00) max retry:  1
rate:  1062.20/s (last pct: 100.00) max retry:  1
rate:  1062.44/s (last pct: 100.00) max retry:  1
rate:  1062.68/s (last pct: 100.00) max retry:  1
rate:  1062.92/s (last pct: 100.00) max retry:  1
rate:  1063.16/s (last pct: 100.00) max retry:  1
Enter fullscreen mode Exit fullscreen mode

There's one difference with PostgreSQL which, using pessimistic locking had no retries. YugabyteDB uses optimistic locking here.

YugabyteDB SERIALIZABLE different id

In my RateLimitDemo.java I keep the id to concatenated the session pid: rate_limiting_request(?||pg_backend_pid(),?) and I set Read Committed isolation level: connection.setTransactionIsolation(Connection.TRANSACTION_SERIALIZABLE)

The throughput is the same:

rate:  1079.99/s (last pct: 100.00) max retry:  2
rate:  1079.38/s (last pct: 100.00) max retry:  2
rate:  1079.44/s (last pct: 100.00) max retry:  2
rate:  1079.51/s (last pct: 100.00) max retry:  2
rate:  1079.57/s (last pct: 100.00) max retry:  2
rate:  1079.63/s (last pct: 100.00) max retry:  2
rate:  1079.69/s (last pct: 100.00) max retry:  2
rate:  1079.75/s (last pct: 100.00) max retry:  2
rate:  1079.81/s (last pct: 100.00) max retry:  2
rate:  1079.87/s (last pct: 100.00) max retry:  2
rate:  1079.94/s (last pct: 100.00) max retry:  2
rate:  1080.00/s (last pct: 100.00) max retry:  2
Enter fullscreen mode Exit fullscreen mode

Serializable is the right isolation level. The amount of retries is still low.

Here are the major performance metrics during this run:
Cloud metrics

  • 1000 YSQL ops/s matches the rate of tokens per second because each token request is one UPDATE statement (only the first one for each id has an additional insert)
  • 1000 ops/s is the number of operations in DocDB, the distributed storage and transaction layer, where operations are replicated to the 3 nodes with the Raft protocol. Here, each UPDATE ... RETURNING is a transactional read+write and shows up as one read and one write. There are some cases when the RETURNING is pushed down to be one operation but that's not done currently on calculated values (because the calculation is done on the YSQL layer)
  • 5 millisecond latency on average for those UPDATE. Because the table is hash sharded on the id those operations are sent to the right node, the tablet leader, and wait to get the write quorum from another node (I have a multi-AZ configuration here)
  • I've displayed compaction to explain the little increase of latency from 5ms to 7ms when compaction is occurring in the background. All updates are stored as new versions for the column value and SST file compaction gets rid of previous versions.

We have a view on pg_stat_statements confirming this average time of 5 milliseconds.
pg_stat_statements
"local block" stats are zero because there's no temporary table involved here. We do not display shared block hits because YSQL is stateless. The PostgreSQL code is reused only above the table access method, which transforms tuple manipulation to DocDB operations.

So, this is about running this Token Bucket algorithm without collisions. The performance is the same as with PostgreSQL, with the additional possibility to scale out. The load is distributed to 3 nodes here, and replication factor RF=3 let all continue transparently if one node goes down for planned maintenance of unplanned outage.

PostgreSQL READ COMMITTED with same id

Now stressing the race condition with 50 threads on the same id. In my RateLimitDemo.java I put back the id alone: rate_limiting_request(?,?) and I set Read Committed isolation level: connection.setTransactionIsolation(Connection.TRANSACTION_READ_COMMITTED)

rate:   126.99/s (last pct: 96.69) max retry:  4
rate:   127.59/s (last pct: 84.78) max retry:  4
rate:   127.39/s (last pct: 95.62) max retry:  4
rate:   127.17/s (last pct: 98.37) max retry:  4
rate:   126.97/s (last pct: 96.71) max retry:  4
rate:   127.58/s (last pct: 95.68) max retry:  4
rate:   127.38/s (last pct: 97.62) max retry:  4
rate:   127.15/s (last pct: 96.68) max retry:  4
rate:   127.76/s (last pct: 88.00) max retry:  4
rate:   127.54/s (last pct: 92.53) max retry:  4
rate:   127.34/s (last pct: 94.48) max retry:  4
rate:   127.91/s (last pct: 92.85) max retry:  4
rate:   127.69/s (last pct: 92.68) max retry:  4
rate:   127.50/s (last pct: 92.87) max retry:  4
rate:   128.02/s (last pct: 83.57) max retry:  4
rate:   127.78/s (last pct: 95.61) max retry:  4
rate:   128.33/s (last pct: 95.61) max retry:  4
rate:   128.14/s (last pct: 95.66) max retry:  4
rate:   128.74/s (last pct: 98.04) max retry:  4
rate:   128.51/s (last pct: 92.40) max retry:  4
rate:   128.29/s (last pct: 94.63) max retry:  4
Enter fullscreen mode Exit fullscreen mode

The rate is much lower here, like it was with PostgreSQL, because all threads compete to update the same row. First, only one node is busy, as this row is in one tablet. Second, there are retries, even in Read Committed isolation level.

Here is a the error cought:

(pid@host 23119@10.8.11.222)   3771 calls   3487 tokens      3.8 /sec 60000 remaining
(pid@host 22797@10.8.11.222)   2706 calls   2460 tokens      2.6 /sec 60000 remaining
(pid@host 23431@10.8.13.238)   1513 calls   1422 tokens      1.5 /sec 60000 remaining
2022-01-05T23:00:26.369987Z SQLSTATE 40001 on retry #0 com.yugabyte.util.PSQLException: ERROR: All transparent retries exhausted. Operation failed. Try again.: Value write after transaction start: { physical: 1641423626346947 } >= { physical: 1641423625848215 }: kConflict
2022-01-05T23:00:26.371342Z SQLSTATE 40001 on retry #0 com.yugabyte.util.PSQLException: ERROR: Operation expired: Transaction aborted: kAborted
(pid@host 22820@10.8.8.14)   2568 calls   2482 tokens      2.7 /sec 60000 remaining
(pid@host 23082@10.8.8.14)   2272 calls   2186 tokens      2.4 /sec 60000 remaining
Enter fullscreen mode Exit fullscreen mode

This is the one I catch in my program, to retry it after a few milliseconds, but it was already retried automatically in the database (All transparent retries exhausted). This explains why it is slower even with a small number of application retries.

PostgreSQL SERIALIZABLE with same id

Last test, in my RateLimitDemo.java I put back the id alone: rate_limiting_request(?,?) and I set Read Committed isolation level: connection.setTransactionIsolation(Connection.SERIALIZABLE)

Given the previous result, I've reduced the number of threads to 10, as I did with PostgreSQL, and run it during the night. Here is the rate of tokens acquired per seconds:

rate:   116.60/s (last pct: 93.95) max retry:  8
rate:   116.60/s (last pct: 93.25) max retry:  8
rate:   116.60/s (last pct: 92.66) max retry:  8
rate:   116.60/s (last pct: 88.60) max retry:  8
rate:   116.60/s (last pct: 88.48) max retry:  8
rate:   116.60/s (last pct: 93.95) max retry:  8
rate:   116.59/s (last pct: 88.60) max retry:  8
rate:   116.59/s (last pct: 93.92) max retry:  8
rate:   116.59/s (last pct: 93.92) max retry:  8
rate:   116.59/s (last pct: 92.66) max retry:  8
rate:   116.59/s (last pct: 87.81) max retry:  8
rate:   116.59/s (last pct: 88.73) max retry:  8
rate:   116.59/s (last pct: 87.81) max retry:  8
rate:   116.58/s (last pct: 91.75) max retry:  8
rate:   116.58/s (last pct: 92.66) max retry:  8
rate:   116.58/s (last pct: 93.25) max retry:  8
rate:   116.58/s (last pct: 93.95) max retry:  8
rate:   116.58/s (last pct: 87.81) max retry:  8
rate:   116.58/s (last pct: 91.75) max retry:  8
rate:   116.59/s (last pct: 93.95) max retry:  8
Enter fullscreen mode Exit fullscreen mode

The throughput is low, given the update conflicts with all threads on the same row, but the latency stays good: 7344625.95/3387433=2.2 milliseconds on average for this query (the rate_limiting_request(?,?) one):
slow queries
The other one 9869491.81/2149291=4.6ms was the previous test on different id. Yes, in this race condition, throughput is lower as it cannot be distributed but response time is higher given data locality in RAM and CPU).

The performance metrics show the same:
performance metrics
The night run is in the middle (I started another test with 10 threads on same id and 50 threads on different ones, which is more realistic), with low CPU usage. If you are in this race condition with all token requests on few users or tenants IDs, and need higher throughput, this Token Bucket is not scalable. I'll show another algorithm in the next posts.

Top comments (0)