DEV Community

Tyler Smith
Tyler Smith

Posted on • Originally published at caddyexamples.com

Using the same Caddyfile for both development and production

Ideally, a single Caddyfile could handle the following use cases without relying on different files for development and production:

  • When running locally, develop using the localhost hostname without having to provision certificates.
  • When running in production, automatically provision TLS certificates for the appropriate hostnames.
  • Redirect www to non-www or vice versa.

Using an environment variable in the site address allows Caddy to support all of these use cases with a single Caddyfile.

{$SITE_HOSTNAME:localhost:80} {
    # bind allows access to containers from host when
    # running Caddy in Docker.
    bind 0.0.0.0

    respond "Hello, world!"
}

# Handle redirects from www to non-www
www.{$SITE_HOSTNAME:localhost:80} {
    # bind allows access to containers from host when
    # running Caddy in Docker.
    bind 0.0.0.0

    redir {scheme}://{$SITE_HOSTNAME:localhost:80}{uri}
}
Enter fullscreen mode Exit fullscreen mode

During development, no value is needed for the $SITE_HOSTNAME environment variable: it will default to localhost:80. Because the default http port :80 is specified, Caddy will serve the site strictly over http without attempting to provision a certificate.

In production, the $SITE_HOSTNAME environment variable should be set to the appropriate domain (example: yoursite.com). Caddy will then automatically provision the TLS certificates, allowing you to run the same Caddyfile in both development and production.

The {scheme} placeholder will ensure that if the request used http (like http://www.locahost), it will redirect to its non-www counterpart with the correct scheme.

If you instead wanted to redirect from non-www to www, you could use the following configuration.

www.{$SITE_HOSTNAME:localhost:80} {
    # bind allows access to containers from host when
    # running Caddy in Docker.
    bind 0.0.0.0

    respond "Hello, world!"
}

# Handle redirects from non-www to www
{$SITE_HOSTNAME:localhost:80} {
    # bind allows access to containers from host when
    # running Caddy in Docker.
    bind 0.0.0.0

    redir {scheme}://www.{$SITE_HOSTNAME:localhost:80}{uri}
}
Enter fullscreen mode Exit fullscreen mode

Gotchas

There are a few things you need to watch out for if you use this configuration.

The www to non-www redirect won't work correctly if you're mapping to a different port on the host when running inside a container. If Caddy is running on port :80 in a container but it is mapped to :8080 on the host, the example above would redirect http://www.localhost:8080 to http://localhost:80. This is because Docker maps the host port :8080 to :80 before Caddy ever sees it, so inside the container Caddy is actually redirecting http://www.localhost:80 to http://localhost:80.

You can't use the environment variable $HOSTNAME if you're running inside of a Docker container. The Caddy container already has an environment variable called $HOSTNAME, and it cannot be overwritten.

Testing the www.localhost redirect may require changes to your computer's hosts file. The www.localhost address worked fine on my MacBook with no additional configuration, but your mileage may vary.

Top comments (0)