DEV Community

Erik Guzman
Erik Guzman

Posted on • Originally published at blog.guzman.codes

Avoid Trips To The Database With Nebulex - Phoenix Series

Recently, I have been looking for ways to optimize my Stream Closed Captioner application. During one of my typical scroll-throughs of my Following lists and other sites, I discovered Nebulex.

Nebulex, a local and distributed caching toolkit for Elixir.

Like with many other caching toolkits, Nebulex covers all the basics.

This article is not a deep dive into Nebulex features but an example of how I used it in my own application.

Inserting (with time to live):

Blog.Cache.put(key, data, ttl: :timer.hours(1))
Enter fullscreen mode Exit fullscreen mode

Retrieving:

Blog.Cache.get(key)
Enter fullscreen mode Exit fullscreen mode

Counters:

Blog.Cache.incr(:my_counter)

Blog.Cache.incr(:my_counter, 5)
Enter fullscreen mode Exit fullscreen mode

Deleting:

Blog.Cache.delete(1)
Enter fullscreen mode Exit fullscreen mode

Now, this is a partial list of Nebulex capabilities. There are several more functions to interact with the cache, covering many more use cases you might have.

But Why Choose Nebulex?

While looking at Nebulex, two things caught my eye that would make Nebulex easily fit into any Phoenix implication (in my opinion).

  1. The easy setup using a mix task

  2. Nebulex implementation ofΒ Cache as System of Record

Easy Setup

Starting with Nebulex is extremely easy because of their handy dandy mix task. Just run:

mix nbx.gen.cache -c Blog.Cache
Enter fullscreen mode Exit fullscreen mode

This command will generate the cache configuration in your config.exs and create a cache module. The last step is to add the cache module to your supervision tree. This step is called out in the docs and task output.

Cache as System of Record (Cache-as-SoR)

This feature caught my eye and is perfect for how I want to use the cache.

If you need to learn what Cache as System of Record is, here is an excerpt from the Nebulex docs.

The cache-as-SoR pattern implies using the cache as though it were the primary system-of-record (SoR).

The pattern delegates SoR reading and writing activities to the cache, so that application code is (at least directly) absolved of this responsibility. To implement the cache-as-SoR pattern, use a combination of the following read and write patterns:

  • Read-through

  • Write-through

Advantages of using the cache-as-SoR pattern are:

  • Less cluttered application code (improved maintainability through centralized SoR read/write operations)

  • Choice of write-through or write-behind strategies on a per-cache basis

  • Allows the cache to solve the thundering-herd problem

To better understand what this means, here is a code example of implementing a read-through pattern in my project:

  @decorate cacheable(
              cache: Cache,
              key: {StreamSettings, user_id}
            )
  def get_stream_settings_by_user_id(user_id) do
    Repo.get_by(StreamSettings, user_id: user_id)
  end
Enter fullscreen mode Exit fullscreen mode

In my Settings module, the get_stream_settings_by_user_id is called every time a caption payload is broadcasted to viewers to check if the broadcaster wants to add additional profanity filters or other text modifiers. Nebulex offers the cacheable decorator function that will cache the result of my get_stream_settings_by_user_id function using a specified key. If data already exists in the cache and hasn't expired, then it will return the cached result the next time this function is called.

In the above code, I am caching StreamSettings by the user_id and saving time by avoiding trips to the database till the cache entry expires. I love how easy it is to set up caching on any function I am using.

But what happens if the user's StreamSettings are updated? That's where the write-through pattern's decorator comes in! Let's look at some code again:

@decorate cache_put(
            cache: Cache,
            key: {StreamSettings, stream_settings.user_id}
          )
def update_stream_settings(%StreamSettings{} = stream_settings, attrs) do
  stream_settings
  |> StreamSettings.update_changeset(attrs)
  |> Repo.update()
end
Enter fullscreen mode Exit fullscreen mode

cache_put is the magic function here. It will update the cache with the result of update_stream_settings using the key specified, {StreamSettings, stream_settings.user_id}. I like how Nebulex makes it simple to wrap your existing functions with cache reads and writes.

But the value you are caching in your read-through is different from the value you are caching in your write-through function!?!?

Good Catch! Well, Nebulex also has a function for that. If the value you are caching using the cacheable function is a different shape from the value that the cache_put function, you can use the cache_evict function. Let's go through an example:

# Cache - key:{StreamSettings, 123}, value: nil
get_stream_settings_by_user_id(123) 
# Return: %StreamSettings{some_data}
# Cache - key:{StreamSettings, 123}, value: %StreamSettings{some_data}
Enter fullscreen mode Exit fullscreen mode

Calling get_stream_settings_by_user_id places takes the returned value and places it in the cache, going from nil --> %StreamSettings{some_data}

update_stream_settings(stream_settings, %{update_data}) 
# Return: {:ok, %StreamSettings{some_updated_data}}
# Cache - key: {StreamSettings, 123}, value: {:ok, %StreamSettings{some_updated_data}}
Enter fullscreen mode Exit fullscreen mode

But the problem arises with the return value of update_stream_settings. Instead of the result being a StreamSettings struct, it instead returns a tuple {:ok, %StreamSettings{}}. But cache_evict is here to save the day!

@decorate cache_evict( # <------- The change -------
            cache: Cache,
            key: {StreamSettings, stream_settings.user_id}
          )
def update_stream_settings(%StreamSettings{} = stream_settings, attrs) do
  stream_settings
  |> StreamSettings.update_changeset(attrs)
  |> Repo.update()
end
# Cache - key:{StreamSettings, 123}, value: nil
Enter fullscreen mode Exit fullscreen mode

Instead of caching the new result from update_stream_settings this will remove the value from the cache, removing the worry or mismatched cached data and instead letting the read-through function, aka cacheable write to the action on the following invocation.

Conclusion

Nebulex's Cache as System of Record is a feature that fits right into my mental model of how I would like to work with a cache. Just decorate the functions I use throughout my applications and BAM caching with minimal configuration. Nebulex has more features; look at Nebulex if you're in the market for a caching toolkit.

Top comments (0)