DEV Community

Serhat Teker
Serhat Teker

Posted on • Originally published at tech.serhatteker.com on

How to Set Up WireGuard VPN Client on Android Phone

0. Prerequisites

You need a working WireGuard VPN server. Learn how to set that up here: How to Set Up WireGuard VPN Server on Ubuntu

1. Install

You can get the official app from: WireGuard Google Play Store.

2. Configure

2.0. Keys

You can use your one of below host machine;

Run the following command to generate the public and private keys:

$ sudo mkdir -p /etc/wireguard/clients
$ wg genkey | sudo tee /etc/wireguard/clients/android.key | wg pubkey | sudo tee /etc/wireguard/clients/android.key.pub
Enter fullscreen mode Exit fullscreen mode

This places our keys under our /etc/wireguard/clients directory that we just created.
As usual, DO NOT share your private key with anyone else, otherwise your VPN will be compromised.

You can view these files with cat:

$ cat /etc/wireguard/clients/android.key
$ cat /etc/wireguard/clients/android.key.pub
Enter fullscreen mode Exit fullscreen mode

2.1. mobile.conf File

Create configuration file,

$ sudoedit /etc/wireguard/clients/mobile.conf
Enter fullscreen mode Exit fullscreen mode

and add following settings:

[Interface]
PrivateKey = MOBILE_CLIENT_PRIVATE_KEY
Address = 10.220.0.2/24
DNS = 1.1.1.1, 1.0.0.1

[Peer]
PublicKey = YOUR_SERVER_PUBLIC_KEY
Endpoint = YOUR_SERVER_IP_ADDRESS:51820
AllowedIPs = 0.0.0.0/0
Enter fullscreen mode Exit fullscreen mode

Replace MOBILE_CLIENT_PRIVATE_KEY with your private key in /etc/wireguard/clients/mobile.key.

2.2. Add Mobile Client to Server

The last configuration step is to add your dekstip client's public key and IP address to your server:

$ sudo wg set wg0 peer MOBILE_CLIENT_PRIVATE_KEY allowed-ips 10.220.0.2
Enter fullscreen mode Exit fullscreen mode

2.3. Configure Your Phone Connection

There are 2 ways of doing it and as we can see the last one is the easiest and
preferred one.

2.3.1. Configure From Scratch

  • Open WireGuard app on your android phone
  • Press the blue plus button on the bottom right
  • You’ll be prompted to confirm your action, press OK.
  • Select Create From Scratch
  • Enter the data that we used to create mobile.conf. You can see and example screenshot below;

Wireguard Android

2.3.2. Configure via QR Code

We are going to use qrencode package. First install it;

$ sudo apt install qrencode
Enter fullscreen mode Exit fullscreen mode

Then create QR Code from mobile.conf file that we created above;

$ sudo cat /etc/wireguard/clients/mobile.conf | qrencode -o wireguard-android-conf.png
Enter fullscreen mode Exit fullscreen mode

In your WireGuard Android app;

  • Press the blue plus button on the bottom right
  • You’ll be prompted to confirm your action, press OK.
  • Select Scan From QR Code
  • Scan the wireguard-android-conf.png file

3. Start WireGuard

Start WireGuard connection from toggle button on the main screen of your android app.

4. Test WireGuard

You can now check you IP searching on the browser what is my ip.

You should now see your YOUR_SERVER_IP_ADDRESS instead of your your local IP which your ISP provided.

Congrats!

All done!

Top comments (0)