DEV Community

Cover image for Use Ansible to create and start LXD virtual machines
Ákos Takács
Ákos Takács

Posted on • Edited on

Use Ansible to create and start LXD virtual machines

#virtualmachine #infrastructureascode #ansible #tutorial

Introduction

The next step in our home lab is to finally have an Ansible playbook to create and start a virtual machine. It also means that eventually we will have different kind of dynamically created servers into which we probably want to SSH. In this chapter I will show you a way to create a LXD virtual machine on Ubuntu and also automatically configure your host to be able to SSH into the new virtual machine. In this capter we will assume that we still don't want to manage these virtual machines from Ansible, but that will be the final goal.

Note: In the original post and video I used a different LXD remote image repository. I had to change it, because that repository was replaced surprisingly in an active LTS LXD release. That's because of the original developers of LXD started Incus and they stopped supporting LXD in their image repository. There is a new repo, which does not include Ubuntu server images currently, only desktop.

Table of contents

Before you begin

Requirements

» Back to table of contents «

Download the already written code of the previous episode

» Back to table of contents «

If you started the tutorial with this episode, clone the project from GitHub:

git clone https://github.com/rimelek/homelab.git
cd homelab
Enter fullscreen mode Exit fullscreen mode

If you cloned the project now, or you want to make sure you are using the exact same code I did, switch to the previous episode in a new branch

git checkout -b tutorial.episode.8b tutorial.episode.8
Enter fullscreen mode Exit fullscreen mode

Have the inventory file

» Back to table of contents «

Copy the inventory template

cp inventory-example.yml inventory.yml
Enter fullscreen mode Exit fullscreen mode

Activate the Python virtual environment

» Back to table of contents «

How you activate the virtual environment, depends on how you created it. In the episode of The first Ansible playbook describes the way to create and activate the virtual environment using the "venv" Python module and in the episode of The first Ansible role we created helper scripts as well, so if you haven't created it yet, you can create the environment by running

./create-nix-env.sh venv
Enter fullscreen mode Exit fullscreen mode

Optionally start an ssh agent:

ssh-agent $SHELL
Enter fullscreen mode Exit fullscreen mode

and activate the environment with

source homelab-env.sh
Enter fullscreen mode Exit fullscreen mode

Preparing the new inventory

» Back to table of contents «

Although in this tutorial I used only one server, you could add multiple servers to the inventory file, but you probably don't want to create a specific VM on each server.

  • You could have a playbook in which you define a specific host instead of an inventory group. Not a very good way in terms of redundancy.
  • You could define a list under the vars: section of a specific host in the inventory file, in which all the items would be a mapping of key-value pairs with the configurations for the virtual machine you want to create on that host and handle that list in a loop in the Ansible role responsible for creating the VM. That's much better, but too complicated for this tutorial.

For now, I will create a playbook for creating a general virtual machine which allows using Docker, so we could install it on multiple hosts. Just imagine that you want to be able to use Docker on all of your Linux hosts in a VM to test network connections between them. I know, it is hard to imagine that, so we will need a list of servers which could include a single server, so you will run Docker in a VM only on one machine.

It's time to change our inventory file to use new inventory groups in addition to the special group called "all". As a reminder, see my old inventory file:

all:
  vars:
    ansible_user: ansible-homelab
    config_apt_update: true
    config_lxd_zfs_pool_disks:
      - /dev/disk/by-id/scsi-1ATA_Samsung_SSD_850_EVO_500GB_S2RBNX0J103301N-part6
    sops: "{{ lookup('community.sops.sops', 'secrets.yml') | ansible.builtin.from_yaml }}"
  hosts:
    ta-lxlt:
      ansible_host: 192.168.4.58
      ansible_ssh_private_key_file: ~/.ssh/ansible
      ansible_become_pass: "{{ sops.become_pass }}"
Enter fullscreen mode Exit fullscreen mode

In the new inventory file, we will have an additional group:

docker_vm_host_machines:
  hosts:
    ta-lxlt:
Enter fullscreen mode Exit fullscreen mode

That's it, defined in the end of the previous inventory file. Since we have all the parameters for the host in the group "all", we don't have to define any in the new group, but we still have to add the name of the host machine without values.

When we create our new playbook, in the "hosts:" section we will refer to "docker_vm_host_machines" instead of "all"

Check how Ansible interprets the inventory file

Wrapper script to run any command in the Nix environment

» Back to table of contents «

When I started this tutorial series, I thought we would need
only the ansible-playbook command. I was wrong. Now we should try the ansible-inventory command and also run an ad-hoc Ansible command. Instead of creating two more wrapper scripts only for the new commands, I will create a script called nix.sh which can run any.

nix.sh

#!/usr/bin/env nix-shell
#! nix-shell -i bash
#! nix-shell -p sops
#! nix-shell -I https://github.com/NixOS/nixpkgs/archive/refs/tags/23.05.tar.gz

source config.sh

"$@"
Enter fullscreen mode Exit fullscreen mode

I could use this script from all the other wrapper scripts to reduce redundancy, but I don't want to change many files in this chapter, so let's keep it for another day.

Make the script executable:

chmod +x nix.sh
Enter fullscreen mode Exit fullscreen mode

And run the following command to get the version of Ansible:

./nix.sh ansible --version
Enter fullscreen mode Exit fullscreen mode 
ansible [core 2.15.0]
  config file = None
  configured module search path = ['/Users/ta/.ansible/plugins/modules', '/usr/share/ansible/plugins/modules']
  ansible python module location = /Users/ta/Data/projects/myprojects/tutorials/iac/venv/lib/python3.11/site-packages/ansible
  ansible collection location = /Users/ta/.ansible/collections:/usr/share/ansible/collections
  executable location = /Users/ta/Data/projects/myprojects/tutorials/iac/venv/bin/ansible
  python version = 3.11.5 (main, Oct 15 2023, 20:58:46) [Clang 11.1.0 ] (/Users/ta/Data/projects/myprojects/tutorials/iac/venv/bin/python3.11)
  jinja version = 3.1.2
  libyaml = True
Enter fullscreen mode Exit fullscreen mode

Use the ansible-inventory command

» Back to table of contents «

The following command would normally show you the structure of the inventory file as Ansible can see it:

ansible-inventory -i inventory.yml --graph
Enter fullscreen mode Exit fullscreen mode

Since we installed Ansible in a Nix environment, we will need to use the previously created wrapper script:

./nix.sh ansible-inventory -i inventory.yml --graph
Enter fullscreen mode Exit fullscreen mode

My output:

@all:
  |--@ungrouped:
  |--@docker_vm_host_machines:
  |  |--ta-lxlt
Enter fullscreen mode Exit fullscreen mode

Since "all" includes the new group, any variables we define in that group, will be available in the others.

Get the value of a single variable

» Back to table of contents «

Using the "ansible" command, we can use the "debug" module to get the value of ansible_host. We will tell Ansible to run task in the group called "docker_vm_host_machines", but it will get the parameter defined in "all".

./nix.sh ansible docker_vm_host_machines -i inventory.yml -m debug -a var=ansible_host
Enter fullscreen mode Exit fullscreen mode

My output:

ta-lxlt | SUCCESS => {
    "ansible_host": "192.168.4.58"
}
Enter fullscreen mode Exit fullscreen mode

New playbook for creating a VM

» Back to table of contents «

Let's create the skeleton of the playbook and call the file "playbook-lxd-docker-vm.yml in the project root.".

# region play: Create the VM
- name: Create the VM
  hosts: docker_vm_host_machines
  pre_tasks:
  vars:
  tasks:
# endregion
Enter fullscreen mode Exit fullscreen mode

I used a special comment syntax which is supported in JetBrains IDEs and also in Visual Studio code. These are what I use most of the time. If it doesn't work for you in VSCode by default, you can try the extension called region folding for VSCode. This syntax allows us to collapse different regions of the code and assign a name to it which will be shown in the collapsed state. It will be useful when we will have multiple plays, and we want to see the name when the play is collapsed instead of something like <4 keys>. I will use this for tasks as well.

You can see the new inventory group set for the play.

Start a virtual machine from Ansible

» Back to table of contents «

Now we will need an Ansible role to create and start a virtual machine. Since LXD was originally for containers, the module still called community.general.lxd_container. Let's see the skeleton of the task in the tasks section of the playbook containing only the static parameters.

Common parameters without variables for starting a VM

» Back to table of contents «

  tasks:

    # region task: Start Docker VM
    - name: Start Docker VM
      become: true
      community.general.lxd_container:
        url: unix:/var/snap/lxd/common/lxd/unix.socket
        type: virtual-machine
        state: started
        wait_for_ipv4_addresses: true
        config:
          boot.autostart: "false"
    # endregion
Enter fullscreen mode Exit fullscreen mode
  • We need to be able to communicate with the LXD daemon, so we define the path of the LXD unix socket file in the url parameter.
  • We want a virtual machine, so we set the type to virtual-machine.
  • We want the task return only when the virtual machine got an IP address already, so we can continue with other tasks that require that IP address.
  • This is a test virtual machine, so we don't want it to start when the host starts, so boot.autostart should be false in the config section.
  • When we run the playbook, we don't want to start the VM manually, so we set the state to started.

Of course, we want set a source. A source is a collection of parameters containing how and from where LXD should download the base image for the virtual machine.

    - name: Start Docker VM
      become: true
      community.general.lxd_container:
        # ...
        source:
          type: image
          server: https://cloud-images.ubuntu.com/releases
          protocol: simplestreams
          alias: "22.04"
Enter fullscreen mode Exit fullscreen mode

So as you see above, we will use the cloud variant of the Ubuntu 22.04 image from the specified server using the simplestream protocol.

Dynamically set parameters for starting a VM

VM name and resource limits

» Back to table of contents «

Our VM will need a name, and we want to limit the number of CPUs and the memory.

    - name: Start Docker VM
      become: true
      community.general.lxd_container:
        # ...
        name: "{{ vm_name }}"
        # ...
        config:
          # ...
          limits.cpu: "{{ vm_cpu }}"
          limits.memory: "{{ vm_memory }}"
Enter fullscreen mode Exit fullscreen mode

The value of these parameters will come from the inventory file, but I wanted to keep this task short, so we will set the variables in the "vars" section of the play:

# region play: Create the VM
- name: Create the VM
  hosts: docker_vm_host_machines
  vars:
    vm_name: "{{ config_lxd_docker_vm_name | default('docker', true) }}"
    vm_memory: "{{ config_lxd_docker_vm_memory | default('4GiB', true)}}"
    vm_cpu: "{{ config_lxd_docker_vm_cpus | default(4, true) }}"
  pre_tasks:
  tasks:
# endregion
Enter fullscreen mode Exit fullscreen mode

This way we have default values even if the config parameters are not defined in the inventory file or when defined with empty values (that is what "true" for as second parameter). I defined only the name of the virtual machine in the inventory and let Ansible use the default CPU and memory limits. Now we got to another interesting part.

Cloud-init config for SSH access and sudo password

» Back to table of contents «

We can create a virtual machine with the already described parameters, but without cloud-init configs we have no users in the virtual machine, not to mention the SSH configuration for that user. We want the following cloud-init config:

#cloud-config
users:
  - name: {{ vm_user }}
    lock_passwd: false
    groups: sudo
    shell: /bin/bash
    passwd: "{{ vm_pass }}"
    ssh_authorized_keys:
      - {{ lookup('file', vm_ssh_pub_key) }}

packages:
  - openssh-server
Enter fullscreen mode Exit fullscreen mode

First of all we needed to install the openssh-server package and then define a list of users. There will be only one user by default and that user will be in the "sudo" group. The user's default shell will be the bash shell, and we define a password and a list of SSH public keys. The password comes from the vm_pass variable, and we will need the "file" lookup plugin to read the public key defined in the vm_ssh_pub_key variable. Let's add it to the task:

    - name: Start Docker VM
      become: true
      community.general.lxd_container:
        # ...
        config:
          # ...
          cloud-init.user-data: |
            #cloud-config
            users:
              - name: {{ vm_user }}
                lock_passwd: false
                groups: sudo
                shell: /bin/bash
                passwd: "{{ vm_pass }}"
                ssh_authorized_keys:
                  - {{ lookup('file', vm_ssh_pub_key) }}

            packages:
              - openssh-server
Enter fullscreen mode Exit fullscreen mode

And set the variables:

# region play: Create the VM
- name: Create the VM
  hosts: docker_vm_host_machines
  vars:
    # ...
    vm_user: "{{ config_lxd_docker_vm_user | default('manager', true) }}"
    vm_pass: "{{ config_lxd_docker_vm_pass | ansible.builtin.password_hash(salt=vm_pass_salt)  }}"
    vm_ssh_pub_key: "{{ config_lxd_docker_vm_ssh_pub_key | default(vm_ssh_priv_key + '.pub', true) }}"
  pre_tasks:
  tasks:
# endregion
Enter fullscreen mode Exit fullscreen mode

The default user will be "manager" and there will be no default password, but we need to use ansible.builtin.password_hash to convert the plain text password to a hash. To use this filter, you need to add the following line to the requirements.txt:

passlib==1.7.4 # for using ansible.builtin.password_hash()
Enter fullscreen mode Exit fullscreen mode

Don't forget to run pip install -r requirements.txt to install the new library.

Alternatively, you could remove the filter and pass a password hash directly. The path of the SSH public key will come from the path of the private key, plus .pub as extension, but we still let the user override it. You might have noticed that we have an argument for password_hash called "salt" and the value will come from the variable vm_pass_salt. That means we will need to set two more variables.

# region play: Create the VM
- name: Create the VM
  hosts: docker_vm_host_machines
  vars:
    # ...
    vm_pass_salt: "{{ config_lxd_docker_vm_pass_salt }}"
    vm_ssh_priv_key: "{{ config_lxd_docker_vm_ssh_priv_key }}"
  pre_tasks:
  tasks:
# endregion
Enter fullscreen mode Exit fullscreen mode

Note that the order of the variables does not matter. If you prefer defining the variables first which will be used by other variables, that's fine. If you want to start with the variables that you will eventually refer to in the tasks, that's okay too. For me, it felt easier to explain the variables in this order. You can also notice that there are no default values here, so we add pre tasks to check the required variables:

  pre_tasks:
    - name: Fail if config_lxd_docker_vm_ssh_priv_key is not defined
      when: config_lxd_docker_vm_ssh_priv_key | default('', true) == ''
      ansible.builtin.fail:
        msg: You must set an SSH private key to log in to the VM

    - name: Fail if config_lxd_docker_vm_pass_salt is not defined
      when: config_lxd_docker_vm_pass_salt | default('', true) == ''
      ansible.builtin.fail:
        msg: You must set a password salt for the sudo password to log in to the VM
Enter fullscreen mode Exit fullscreen mode

Now our whole play looks like this:

# region play: Create the VM
- name: Create the VM
  hosts: docker_vm_host_machines
  vars:
    vm_name: "{{ config_lxd_docker_vm_name | default('docker', true) }}"
    vm_memory: "{{ config_lxd_docker_vm_memory | default('4GiB', true)}}"
    vm_cpu: "{{ config_lxd_docker_vm_cpus | default(4, true) }}"
    vm_user: "{{ config_lxd_docker_vm_user | default('manager', true) }}"
    vm_pass: "{{ config_lxd_docker_vm_pass | ansible.builtin.password_hash(salt=vm_pass_salt)  }}"
    vm_ssh_pub_key: "{{ config_lxd_docker_vm_ssh_pub_key | default(vm_ssh_priv_key + '.pub', true) }}"

    vm_pass_salt: "{{ config_lxd_docker_vm_pass_salt }}"
    vm_ssh_priv_key: "{{ config_lxd_docker_vm_ssh_priv_key }}"
  pre_tasks:
    - name: Fail if config_lxd_docker_vm_ssh_priv_key is not defined
      when: config_lxd_docker_vm_ssh_priv_key | default('', true) == ''
      ansible.builtin.fail:
        msg: You must set an SSH private key to log in to the VM

    - name: Fail if config_lxd_docker_vm_pass_salt is not defined
      when: config_lxd_docker_vm_pass_salt | default('', true) == ''
      ansible.builtin.fail:
        msg: You must set a password salt for the sudo password to log in to the VM
  tasks:

    # region task: Start Docker VM
    - name: Start Docker VM
      become: true
      community.general.lxd_container:
        url: unix:/var/snap/lxd/common/lxd/unix.socket
        type: virtual-machine
        state: started
        wait_for_ipv4_addresses: true
        name: "{{ vm_name }}"
        source:
          type: image
          server: https://cloud-images.ubuntu.com/releases
          protocol: simplestreams
          alias: "22.04"
        config:
          boot.autostart: "false"
          limits.cpu: "{{ vm_cpu }}"
          limits.memory: "{{ vm_memory }}"
          cloud-init.user-data: |
            #cloud-config
            users:
              - name: {{ vm_user }}
                lock_passwd: false
                groups: sudo
                shell: /bin/bash
                passwd: "{{ vm_pass }}"
                ssh_authorized_keys:
                  - {{ lookup('file', vm_ssh_pub_key) }}

            packages:
              - openssh-server
    # endregion
# endregion
Enter fullscreen mode Exit fullscreen mode

That is a completely fine play in a playbook, but we have some undefined variables in the play which we want to set or other variables we want to override. Let's add the following required variables to our inventory file.

all:
  vars:
    # ...
    config_lxd_docker_vm_pass: "{{ sops.config_lxd_docker_vm_pass }}"
    config_lxd_docker_vm_pass_salt: "{{ sops.config_lxd_docker_vm_pass_salt }}"
    config_lxd_docker_vm_ssh_priv_key: ~/.ssh/ansible
Enter fullscreen mode Exit fullscreen mode

In my case, the SSH private key is the same as I used for the host. I could use a template here too to get the value from the other variable, but I don't recommend reading values from Ansible's built-in variables, because it could lead to some confusion when you change how you access the host, and you forget that it was used somewhere else too. You could introduce a third variable like config_global_ssh_priv_key and read the value from it in the value of the other two variables. The password and the salt parameter comes from a secret. To add the variables, if your secret is already encrypted, use the helper script created for sops.

./sops.sh secret.yml
Enter fullscreen mode Exit fullscreen mode

This is the content of my encrypted secrets.yml in the project root:

become_pass: HomeLab2023
config_lxd_docker_vm_pass: password
config_lxd_docker_vm_pass_salt: 3rehbvjfbr
Enter fullscreen mode Exit fullscreen mode

Run the playbook to start the VM

» Back to table of contents «

We can now run the playbook which will create a new virtual machine on the remote server.

./run.sh playbook-lxd-docker-vm.yml
Enter fullscreen mode Exit fullscreen mode

You can now SSH to the remote server and see that the virtual machine is running:

lxc list
Enter fullscreen mode Exit fullscreen mode

My output:

+--------+---------+------------------------+------+-----------------+-----------+
|  NAME  |  STATE  |          IPV4          | IPV6 |      TYPE       | SNAPSHOTS |
+--------+---------+------------------------+------+-----------------+-----------+
| docker | RUNNING | 10.17.181.143 (enp5s0) |      | VIRTUAL-MACHINE | 0         |
+--------+---------+------------------------+------+-----------------+-----------+
Enter fullscreen mode Exit fullscreen mode

If you want to get a shell as root in the virtual machine, just run

sudo lxc shell docker
Enter fullscreen mode Exit fullscreen mode

You could also use SSH. You already know the IP address, which was in the output of lxc list.

ssh manager@10.17.181.143
Enter fullscreen mode Exit fullscreen mode

We haven't installed anything in the VM yet, but we can finally play with it and delete it when we are done.

Get the IP address of a virtual machine

» Back to table of contents «

The IP address will be different on your machine, and I always like to share commands that will run the same way for everyone, so let's get the IP address automatically.

vm_name=docker
vm_info="$(lxc list "^$vm_name$" --format json | jq '.[0]')"
ip_addresses="$(
  echo "$vm_info" \
  | jq -r '
      .state.network
      | to_entries
      | .[].value.addresses[]
      | select(.family == "inet" and .scope == "global")
      | .address
    '
)"
Enter fullscreen mode Exit fullscreen mode

Now the $ip_addresses variable probably contains a single IP address, unless the virtual machine has multiple networks. In this tutorial we know that we added only one, but later we could change it, so why not make it work with multiple networks as well.

network="$(echo "$vm_info" | jq -r '.expanded_devices.eth0.network')"
ip_range="$(lxc network show "$network" | yq '.config["ipv4.address"]')"
Enter fullscreen mode Exit fullscreen mode

With the above two lines we will get the CIDR notation of the network address. This is what I have in $ip_range: 10.17.181.1/24.

The IP address in the value is the IP of the gateway, but the gateway and the mask size (24) together describes an IP range which has to include the IP we are looking for. With this specific mask size we could check that the IP address starts with 10.17.181., but later we could define a different network with another mask size, so this is when we could use grepcidr. On Ubuntu, we can install it this way:

sudo apt-get install grepcidr
Enter fullscreen mode Exit fullscreen mode

Or download it from the website: https://www.pc-tools.net/unix/grepcidr/

After that, we can run the following command to make sure that the final list contains IP addresses only in the specified IP range:

echo "$ip_addresses" | grepcidr "$ip_range"
Enter fullscreen mode Exit fullscreen mode

That's nice. We could detect the IP address, which is not that useful interactively, but it will help us continue with the next step.

Accessing the virtual machine from the Ansible controller

Why don't we use LAN network

» Back to table of contents «

In the previous sections we learned about SSH-ing to the virtual machine from the host on which the VM is running and also about detecting the IP address of the VM automatically. It would be easier if we could use the SSH client with the SSH keys on the Ansible controller to log in to the virtual machine. One way could be changing the network settings of the virtual machine to get an IP address on the LAN network instead of on the local LXD bridge (lxdbr0). That would work if you have a local network, and you can manage the IP addresses to assign one to a virtual machine. It is not always the case, so I have chosen a different approach. We will keep our current IP address and learn about proxies and how SSH can help us again.

LXD proxy

» Back to table of contents «

You could use an LXD proxy device, but there are multiple requirements.

  • The configuration is different for virtual machines and containers.
  • You would need a static IP address which is recommended anyway, so it won't be a problem in the future, but for now, we are experimenting with dynamically assigned IP addresses.
  • Without firewall settings, you would make the port available from all machines. In a local homelab that is probably fine, but I prefer another solution which is coming in the following sections.

SSH tunnel

» Back to table of contents «

My first idea was simply using an SSH tunnel. I do it frequently. It is basically SSH-ing to a host and use that SSH connection to forward a request from a specific port of the client through the host to an endpoint which is accessible from the host. Note that my remote server's hostname is still ta-lxlt and the IP address of the virtual machine is 10.17.181.143. I open a terminal and run the following command:

ssh -L 127.0.0.1:2000:10.17.181.143:22 -N ta-lxlt
Enter fullscreen mode Exit fullscreen mode

After -L I have the port mapping. The format is

<CLIENT_IP>:<CLIENT_PORT>:<ENDPOINT_IP>:<ENDPOINT_PORT>
Enter fullscreen mode Exit fullscreen mode

CLIENT_IP is optional, but I want to make sure the port is accessible only from localhost. If you know how port forwarding works with Docker, this is very similar, except Docker doesn't need the endpoint ip, since it is always the IP of the container. -N allows me to keep the SSH connection without actually executing any command on the remote server. I open a new terminal and run the following command:

ssh -p 2000 manager@127.0.0.1
Enter fullscreen mode Exit fullscreen mode

If you don't want it to ask for the password, use the SSH key:

ssh -p 2000 -i ~/.ssh/ansible manager@127.0.0.1
Enter fullscreen mode Exit fullscreen mode

or use the SSH agent as we discussed it in Ansible playbook and SSH keys.

Although this is not what we will use for the SSH connection, SSH tunnels can help you with accessing other ports as well, like a web application running inside the virtual machine.

SSH jump servers

» Back to table of contents «

You know that you can SSH to the remote server and from that you can SSH to the virtual machine. You also know that you can pass a command to SSH to execute on the remote server, so you can also run another SSH command.

ssh -t ta-lxlt -- ssh manager@10.17.181.143
Enter fullscreen mode Exit fullscreen mode

-t was required because the SSH command running on the remote server required a pseudo-terminal. We can also try to SSH to the virtual machine and pass the address of a jump server. A jump server is a server to which we have access, and from which we have access to another server. In our case, the virtual machine.

ssh -J ta-lxlt manager@10.17.181.143
Enter fullscreen mode Exit fullscreen mode

This jump server works only because I configured that host in my SSH client config ($HOME/.ssh/config):

Host ta-lxlt ta-lxlt.lan 192.168.4.58
  HostName 192.168.4.58
  Port 22
  User ta
  IdentityFile ~/.ssh/ta-lxlt
Enter fullscreen mode Exit fullscreen mode

We can add our virtual machine too. We will need a name that we can pass to the SSH client. It could be the internal full-qualified hostname of the VM with the remote server's hostname as suffix. Something like this:

Host docker.lxd.ta-lxlt
Enter fullscreen mode Exit fullscreen mode

The internal full qualified hostname is the name of the VM ending with ".lxd". You can confirm it by running the following command on the remote server:

lxc exec docker -- hostname -A
Enter fullscreen mode Exit fullscreen mode 
Host docker.lxd.ta-lxlt
  Hostname 10.17.181.143
  User manager
  IdentityFile ~/.ssh/ansible
  ProxyJump ta-lxlt
Enter fullscreen mode Exit fullscreen mode

Now that we have the ProxyJump parameter defined in the SSH client config, the following command on the Ansible controller is enough to log in to the virtual machine:

ssh docker.lxd.ta-lxlt
Enter fullscreen mode Exit fullscreen mode

That way you don't have to remember the IP address every time. We will automate the SSH client configuration of the virtual machine, so even if the IP address changes, you can still log in using the same hostname.

Using separate config files for different kind of servers

» Back to table of contents «

Using $HOME/.ssh/config for all your SSH client configs works, but I had so many servers (physical, virtual, behind VPN connections) that I found it hard to maintain the config file. Fortunately with recent SSH versions, you can include other config files in the main SSH config. For example, this is how my main config looks like:

Include config.d/homelab
Include config.d/external-services
Include config.d/home
Include config.d/multipass

Include config.d/docker.lxd.ta-lxlt
Enter fullscreen mode Exit fullscreen mode

The configuration of ta-lxlt is in config.d/home, I also have an old swarm cluster client config in config.d/homelab, but I found it better to include the dynamically generated client config for the virtual machine directly in the main config.

Use Ansible to configure the SSH client

Make sure config.d exists

» Back to table of contents «

Since config.d is not created by default,we need to make sure it exists. This is hour following task in the playbook:

    # region task: Create base dir for the new SSH client config file
    - name: Create base dir for the new SSH client config file
      delegate_to: localhost
      ansible.builtin.file:
        state: directory
        path: "{{ lookup('env', 'HOME') }}/.ssh/config.d/"
    # endregion
Enter fullscreen mode Exit fullscreen mode

delegate_to is used to run the task on a specific host regardless of where the rest of the tasks were running, and we can use the env lookup plugin to get the home of our local user. You know everything else from the previous episodes.

Get information about the VM

» Back to table of contents «

As we did in the section Get the IP address of a virtual machine, we need to get information about the virtual machine, but now we use Ansible.

    # region task: Get VM info
    - name: Get VM info
      become: true
      changed_when: false
      ansible.builtin.command: lxc list "^{{ vm_name }}$" --format json
      register: _vm_info_command
    # endregion
Enter fullscreen mode Exit fullscreen mode

We save the info in a registered variable. Here comes the fun part. We already learned that the order of the variables doesn't matter. In order to avoid using blocks and indenting our playbook deeper, we can add our helper variables to the vars section of the playbook. I will keep using the underscore character as a prefix.

    _vm_info: "{{ _vm_info_command.stdout | from_json | first }}"
Enter fullscreen mode Exit fullscreen mode

This way we converted the json text in the standard output to a list object in Ansible, and we got the first item from the list.

Get the IP addresses used by the VM:

» Back to table of contents «

To get the IP addresses in Ansible, we can use a very similar approach to what we used in the terminal. The difference is that we used jq in the terminal (we installed it in Using facts and the GitHub API in Ansible), and we will use Jinja filters in Ansible. Let's add the following variable to the vars section of the playbook.

    _ip_addresses: "{{ 
        _vm_info.state.network
          | dict2items
          | map(attribute='value.addresses')
          | flatten
          | selectattr('family', 'equalto', 'inet')
          | selectattr('scope', 'equalto', 'global')
          | map(attribute='address')
      }}"
Enter fullscreen mode Exit fullscreen mode

Get information about the LXD network

» Back to table of contents «

Getting the name of the network is the easy part. Add the following variable to the vars section of the playbook:

    _network: "{{ _vm_info.expanded_devices.eth0.network }}"
Enter fullscreen mode Exit fullscreen mode

Now that we know the name of the network, we will need to find out what subnet the network is using. Let's add the following task to the playbook:

    # region task: Get network info
    - name: Get network info
      become: true
      changed_when: false
      ansible.builtin.command: lxc network show "{{ _network }}"
      register: _network_info_command
    # endregion
Enter fullscreen mode Exit fullscreen mode

Remember, lxc network show returns a YAML output, not json. So we need to add the following variable to the vars section to the playbook.

    _network_info: "{{ _network_info_command.stdout | from_yaml }}"
Enter fullscreen mode Exit fullscreen mode

Get the IP usable IP address assigned to eth0

» Back to table of contents «

Now that we have everything about the LXD network, we can get the CIDR notation of the subnet and the actual IP address of the VM. We will use a new filter in Ansible, called ansible.utils.reduce_on_network. It is basically the alternative to grepcidr which we used in the terminal. Let's add the following variables to the vars section of the playbook:

    _ip_range: "{{ _network_info.config['ipv4.address'] }}"
    _ip: "{{
      _ip_addresses
        | ansible.utils.reduce_on_network(_ip_range)
        | first
      }}"
Enter fullscreen mode Exit fullscreen mode

Because I'm super careful, I also filter to the first item in the list, so even if for some reason there are multiple lines, I will deal with only one in the next steps. This filter requires the following line in the requirements.txt.

netaddr==0.9.0 # for using ansible.utils.reduce_on_network()
Enter fullscreen mode Exit fullscreen mode

Don't forget to run pip install -r requirements.txt to install the new library.

Generate the new SSH client config for the VM

» Back to table of contents «

Since we put our helper variables to the vars section of the playbook, our task to generate and save the client config will be very short:

    # region task: Add SSH client config
    - name: Add SSH client config
      delegate_to: localhost
      ansible.builtin.copy:
        dest: "{{ lookup('env', 'HOME') }}/.ssh/config.d/{{ vm_inventory_hostname }}"
        content: |
          Host {{ vm_inventory_hostname }}
            Hostname {{ _ip }}
            User {{ vm_user }}
            IdentityFile {{ vm_ssh_priv_key }}

            ProxyJump {{ inventory_hostname }}
    # endregion
Enter fullscreen mode Exit fullscreen mode

We had to delegate it to localhost again. We used the good old copy module save the content defined in the task to the destination file. There is one variable missing and that is the name of the file which will also be the host in the client config. Let's add the following variable to the vars section of the playbook:

    vm_inventory_hostname: "{{
        config_lxd_docker_vm_inventory_hostname
        | default(vm_name + '.lxd.' + inventory_hostname, true)
      }}"
Enter fullscreen mode Exit fullscreen mode

Note that the default suffix is the inventory hostname of the remote server. This is the name which you use in the inventory file under the hosts section. For me, it is the same as the hostname of the remote server, but it could be different. If you want to override the generated name, you can set config_lxd_docker_vm_inventory_hostname in the inventory file.

As a final step, we have to include the generated config file in the main config:

    # region task: Include the new SSH client config in the main config
    - name: Include the new SSH client config in the main config
      delegate_to: localhost
      ansible.builtin.lineinfile:
        state: present
        create: true
        path: "{{ lookup('env', 'HOME') }}/.ssh/config"
        line: "Include config.d/{{ vm_inventory_hostname }}"
    # endregion
Enter fullscreen mode Exit fullscreen mode

We use the lineinfile module to add a new line to the main config. Since it is also possible that you don't have that main config either (although at this point it is unlikely), create: true makes sure the file is created if necessary. We also set the filepath in path and the line in the line parameter.

Run the playbook to generate the SSH client config

» Back to table of contents «

Now you can finally run the playbook. In case you couldn't follow the steps, this is the full playbook:


# region play: Create the VM
- name: Create the VM
  hosts: docker_vm_host_machines
  vars:
    vm_name: "{{ config_lxd_docker_vm_name | default('docker', true) }}"
    vm_memory: "{{ config_lxd_docker_vm_memory | default('4GiB', true)}}"
    vm_cpu: "{{ config_lxd_docker_vm_cpus | default(4, true) }}"
    vm_user: "{{ config_lxd_docker_vm_user | default('manager', true) }}"
    vm_pass: "{{ config_lxd_docker_vm_pass | ansible.builtin.password_hash(salt=vm_pass_salt)  }}"
    vm_ssh_pub_key: "{{ config_lxd_docker_vm_ssh_pub_key | default(vm_ssh_priv_key + '.pub', true) }}"

    vm_pass_salt: "{{ config_lxd_docker_vm_pass_salt }}"
    vm_ssh_priv_key: "{{ config_lxd_docker_vm_ssh_priv_key }}"
    vm_inventory_hostname: "{{
        config_lxd_docker_vm_inventory_hostname
        | default(vm_name + '.lxd.' + inventory_hostname, true)
      }}"

    _vm_info: "{{ _vm_info_command.stdout | from_json | first }}"
    _ip_addresses: "{{ 
        _vm_info.state.network
          | dict2items
          | map(attribute='value.addresses')
          | flatten
          | selectattr('family', 'equalto', 'inet')
          | selectattr('scope', 'equalto', 'global')
          | map(attribute='address')
      }}"
    _network: "{{ _vm_info.expanded_devices.eth0.network }}"
    _network_info: "{{ _network_info_command.stdout | from_yaml }}"
    _ip_range: "{{ _network_info.config['ipv4.address'] }}"
    _ip: "{{
      _ip_addresses
        | ansible.utils.reduce_on_network(_ip_range)
        | first
      }}"
  pre_tasks:
    - name: Fail if config_lxd_docker_vm_ssh_priv_key is not defined
      when: config_lxd_docker_vm_ssh_priv_key | default('', true) == ''
      ansible.builtin.fail:
        msg: You must set an SSH private key to log in to the VM

    - name: Fail if config_lxd_docker_vm_pass_salt is not defined
      when: config_lxd_docker_vm_pass_salt | default('', true) == ''
      ansible.builtin.fail:
        msg: You must set a password salt for the sudo password to log in to the VM
  tasks:

    # region task: Start Docker VM
    - name: Start Docker VM
      become: true
      community.general.lxd_container:
        url: unix:/var/snap/lxd/common/lxd/unix.socket
        type: virtual-machine
        state: started
        wait_for_ipv4_addresses: true
        name: "{{ vm_name }}"
        source:
          type: image
          server: https://cloud-images.ubuntu.com/releases
          protocol: simplestreams
          alias: "22.04"
        config:
          boot.autostart: "false"
          limits.cpu: "{{ vm_cpu }}"
          limits.memory: "{{ vm_memory }}"
          cloud-init.user-data: |
            #cloud-config
            users:
              - name: {{ vm_user }}
                lock_passwd: false
                groups: sudo
                shell: /bin/bash
                passwd: "{{ vm_pass }}"
                ssh_authorized_keys:
                  - {{ lookup('file', vm_ssh_pub_key) }}

            packages:
              - openssh-server
    # endregion

    # region task: Create base dir for the new SSH client config file
    - name: Create base dir for the new SSH client config file
      delegate_to: localhost
      ansible.builtin.file:
        state: directory
        path: "{{ lookup('env', 'HOME') }}/.ssh/config.d/"
    # endregion

    # region task: Get VM info
    - name: Get VM info
      become: true
      changed_when: false
      ansible.builtin.command: lxc list "^{{ vm_name }}$" --format json
      register: _vm_info_command
    # endregion

    # region task: Get network info
    - name: Get network info
      become: true
      changed_when: false
      ansible.builtin.command: lxc network show "{{ _network }}"
      register: _network_info_command
    # endregion

    # region task: Add SSH client config
    - name: Add SSH client config
      delegate_to: localhost
      ansible.builtin.copy:
        dest: "{{ lookup('env', 'HOME') }}/.ssh/config.d/{{ vm_inventory_hostname }}"
        content: |
          Host {{ vm_inventory_hostname }}
            Hostname {{ _ip }}
            User {{ vm_user }}
            IdentityFile {{ vm_ssh_priv_key }}

            ProxyJump {{ inventory_hostname }}
    # endregion

    # region task: Include the new SSH client config in the main config
    - name: Include the new SSH client config in the main config
      delegate_to: localhost
      ansible.builtin.lineinfile:
        state: present
        create: true
        path: "{{ lookup('env', 'HOME') }}/.ssh/config"
        line: "Include config.d/{{ vm_inventory_hostname }}"
    # endregion
Enter fullscreen mode Exit fullscreen mode

And the command to run it:

./run.sh playbook-lxd-docker-vm.yml
Enter fullscreen mode Exit fullscreen mode

After that, you can log in to the VM with the following command from the Ansible controller:

ssh docker.lxd.<server_hostname>
Enter fullscreen mode Exit fullscreen mode

In my case, it is:

ssh docker.lxd.ta-lxlt
Enter fullscreen mode Exit fullscreen mode

Access a webservice on the created VM

» Back to table of contents «

Run a Python http server as an example in the virtual machine:

python3 -m http.server 8888
Enter fullscreen mode Exit fullscreen mode

Open a tunnel on the ansible controller:

ssh -L 127.0.0.1:8888:127.0.0.1:8888 -N docker.lxd.ta-lxlt
Enter fullscreen mode Exit fullscreen mode

And open 127.0.0.1:8888 from a web browser or run the following curl command on the Ansible controller:

curl 127.0.0.1:8888
Enter fullscreen mode Exit fullscreen mode

My output:

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>Directory listing for /</title>
</head>
<body>
<h1>Directory listing for /</h1>
<hr>
<ul>
<li><a href=".bash_history">.bash_history</a></li>
<li><a href=".bash_logout">.bash_logout</a></li>
<li><a href=".bashrc">.bashrc</a></li>
<li><a href=".cache/">.cache/</a></li>
<li><a href=".profile">.profile</a></li>
<li><a href=".ssh/">.ssh/</a></li>
</ul>
<hr>
</body>
</html>
Enter fullscreen mode Exit fullscreen mode

Just think about what happened here:

  • You SSH-d to a remote server
  • Through that remote server you SSH-d to the virtual machine directly from the Ansible controller
  • You opened a tunnel for a web application from the Ansible controller to the localhost of the virtual machine.

Yes, you are right, configuring a LAN IP would have been easier, but not an option for everyone, and if you ask me, less fun ass well.

Conclusion

» Back to table of contents «

I think it's important to mention again that our current solution is not ideal. We use a dynamically assigned IP address for the virtual machine, so even though the IP address will not change every time you restart the virtual machine, it is not dedicated to this VM. That means, when you can't access the virtual machine from the Ansible controller, you need to run the playbook again, even if the virtual machine is already created. For servers, we usually use static IP addresses, but to choose the right IP address could be another challenge, so for now, we used a dynamically assigned IP. That's how we learn step by step.

The final source code of this episode can be found on GitHub:

https://github.com/rimelek/homelab/tree/tutorial.episode.9.1

GitHub logo rimelek / homelab

Source code to create a home lab. Part of a video tutorial

README

This project was created to help you build your own home lab where you can test your applications and configurations without breaking your workstation, so you can learn on cheap devices without paying for more expensive cloud services.

The project contains code written for the tutorial, but you can also use parts of it if you refer to this repository.

Tutorial on YouTube in English: https://www.youtube.com/watch?v=K9grKS335Mo&list=PLzMwEMzC_9o7VN1qlfh-avKsgmiU8Jofv

Tutorial on YouTube in Hungarian: https://www.youtube.com/watch?v=dmg7lYsj374&list=PLUHwLCacitP4DU2v_DEHQI0U2tQg0a421

Note: The inventory.yml file is not shared since that depends on the actual environment so it will be different for everyone. If you want to learn more about the inventory file watch the videos on YouTube or read the written version on https://dev.to. Links in the video descriptions on YouTube.

You can also find an example inventory file in the project root. You can copy that and change the content, so you will use your IP…

View on GitHub

Top comments (0)

Read next

abdibrokhim profile image

I access over 200 AI models with one API. Here’s how…

Ibrohim Abdivokhidov -

mike_andreuzza profile image

How to create a typewriter effect text animation with Tailwind CSS and JavaScript

Michael Andreuzza -

trish_07 profile image

Top 5 Rust Crates to Make Development Easier 🚀

Trish -

paulosilva profile image

Setting up Zed for Elixir development 💧

Paulo Henrique da Silva -