DEV Community

mikeyGlitz
mikeyGlitz

Posted on • Updated on

Building The Cluster: First Steps

#kubernetes #cluster #homelab #linux

This post is #2 in a series which will demonstrate
creating a Kubernetes cluster using an on-prem
environment. If you're new to this series, please
begin with
Part 1: The New Cluster

Installing the OS

I chose to use the Debian distribution for this
cluster. I used the
Bittorrent download
to obtain the DVD image.

Make sure to compare the downloaded ISO file against a checksum.

I burned the install media using Rufus and a
USB pen-drive.

I chose the basic installation options for each node.
The only deviation I made from the default options was to not install
a Swap partition. Kubernetes and Docker installations do not play
nice with Swap partitions.

Network Installation

There will be two networks in the cluster:

Cluster Layout

  • 192.168.0.0/24 - Used for internal LAN
  • 172.16.0.0/29 - Cluster network

Interface Installation

The master node uses an intel wireless adapter for wifi.
This adapter uses the non-free Debian apt repository.
The non-free repository can be added by adding the following
line to /etc/apt/sources.list

deb http://http.us.debian.org/debian stable main contrib non-free
Enter fullscreen mode Exit fullscreen mode

The local apt cache needs to be refreshed

sudo apt update
sudo apt install firmware-iwlwifi
Enter fullscreen mode Exit fullscreen mode

The network interface for the wireless adapter needs to be configured.
The wireless network is configured with WPA security. Debian has a
package for accessing WPA-secured networks, wpasupplicant.

sudo apt install wpasupplicant
Enter fullscreen mode Exit fullscreen mode

wpasupplicant needs to be configured with the network SSID and
passkey

su -l -c "wpa_passphrase myssid my_very_secret_passphrase > /etc/wpa_supplicant/wpa_supplicant.conf"
Enter fullscreen mode Exit fullscreen mode

The wpa_passphrase command will write the SSID and a passkey hash
to a file, /etc/wpa_supplicant/wpa_supplicant.conf.

    ssid="myssid"
    #psk="my_very_secret_passphrase"
    psk="ccb290fd4fe6b22935cbae31449e050edd02ad44627b16ce0151668f5f53c01b"
Enter fullscreen mode Exit fullscreen mode

The network interface configuration also needs to be updated at
/etc/network/interface.

auto enx70886b81ddea
iface enx70886b81ddea inet static
        address 172.16.0.1
        netmask 255.255.255.248
        network 172.16.0.0
        broadcast 172.16.0.7

allow-hotplug wlp2s0
iface wlp2s0 inet static
        address 192.168.0.120
        netmask 255.255.255.0
        network 192.168.0.0
        gateway 192.168.0.1
        broadcast 192.168.0.255
        wpa-ssid myssid
        wpa-psk ccb290fd4fe6b22935cbae31449e050edd02ad44627b16ce0151668f5f53c01b
Enter fullscreen mode Exit fullscreen mode

The interface wpl2s0 configures wifi. The values at wpa-ssid
and wpa-psk are obtained from the values of ssid and psk
from /etc/wpa_supplicant/wpa_supplicant.conf.

The block beginning with enx70886b81ddea configures the interface
to the cluster network. The interface at enx70886b81ddea is a
USB to Ethernet adapter.

iface enx70886b81ddea inet static
        address 172.16.0.1
        netmask 255.255.255.248
        network 172.16.0.0
        broadcast 172.16.0.7
Enter fullscreen mode Exit fullscreen mode

Sets the enx70886b81ddea interface to listen on 172.16.0.1.
The network mask is 255.255.255.248 which is a 7-device address
space. The first and last addresses are reserved for the network
and broadcast addresses respectively.

NAT Routing

The next part of the network set up is setting up network-address
translation (NAT) so that the cluster nodes can reach the Internet.

⚠ With Debian Buster, iptables has been changed to nftables

iptables and iptables-persistent need to be installed.

sudo apt install iptables iptables-persistent
sudo update-alternatives --set iptables=/usr/sbin/iptables-legacy
sudo update-alternatives --set ip6tables=/usr/sbin/ip6tables-legacy
Enter fullscreen mode Exit fullscreen mode

NAT rules will need to be set using iptables.

# set up ip forwarding
echo 1 > /proc/sys/net/ipv4/ip_forward

# NAT rules
iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE --random
iptables -A FORWARD -i eth0 -o wlp2s0 -j ACCEPT
iptables -A FORWARD -i wlp2s0 -o eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A FORWARD -j DROP
Enter fullscreen mode Exit fullscreen mode

The new rules will be cleared upon system reboot. It's important to
persist them.

iptables-save > /etc/iptables.rules
Enter fullscreen mode Exit fullscreen mode

Create the file at /etc/network/if-pre-up.d/firewall if it doesn't exist

#!/bin/bash
/sbin/iptables-restore < /etc/iptables.rules
Enter fullscreen mode Exit fullscreen mode

Add execute permissions to /etc/network/if-pre-up.d/firewall.

chmod +x /etc/network/if-pre-up.d/firewall
Enter fullscreen mode Exit fullscreen mode

DHCP

DHCP is a network protocol which is used to
dynamically assign IP addresses to hosts that are
connected to the network. During the handshake phase
of establishing the network connection, the host
requests an IP address and is assigned one with a
DHCP lease.

isc-dhcp-server is used
to perform DHCP services on the 172.16.0.0/29
network. isc-dhcp-server is installed with the
following command:

sudo apt-get install -y isc-dhcp-server
Enter fullscreen mode Exit fullscreen mode

/etc/dhcp/dhcpd.conf is used to configure the
isc-dhcp-server. The following configuration is used
to configure /etc/dhcp/dhcpd.conf:

ddns-update-style none;
default-lease-time 600;
max-lease-time 7200;
#ping true;
# option domain-name-servers 172.16.0.1;
# option domain-name "haus.net";
authorative;
log-facility local7;

subnet 172.16.0.0 netmask 255.255.255.248 {
        range 172.16.0.1 172.16.0.6;
        option subnet-mask 255.255.255.248;
        option domain-name-servers 172.16.0.1;
        option routers 172.16.0.1;
        get-lease-hostnames true;
        use-host-decl-names true;
        default-lease-time 600;
        max-lease-time 7200;
}
Enter fullscreen mode Exit fullscreen mode

The interface isc-dhcp-server listens on needs to be
configured to listen on the enx70886b81ddea
interface. The /etc/default/isc-dhcp-server file
is where the interface can get set

INTERFACESv4="enx70886b81ddea"
Enter fullscreen mode Exit fullscreen mode

Restart the services and the networks on the master
node will be configured.

systemctl restart isc-dhcp-server
ifup wsl2p0             # Starts the wifi network
ifup enx70886b81ddea    # Starts the Cluster network
Enter fullscreen mode Exit fullscreen mode

Compute Node Setup

Setup for the compute node is easier than the master
node. Edit /etc/network/interfaces with the
following information:

allow-hotplug eth0
iface eth0 inet dhcp
Enter fullscreen mode Exit fullscreen mode

This setup will configure each of the compute nodes
to use DHCP from the master node that was set up
earlier.

⚠ The ethernet device is not always going to be
named eth0. Sometimes you'll have to check
the device name with the ip a command

Hosts can be located on the 172.16.0.0/29 network by
using the nmap utility.

nmap -sn 172.16.0.0/29
Enter fullscreen mode Exit fullscreen mode

Cluster Setup

To set up the cluster, K3S is
going to be used instead of
Kubernetes due to the limited
resources that the cluster is using.
K3S is a lightweight flavor of Kubernetes developed
by Rancher.

There is a convenience utility for K3S called
k3sup.

⚠ I had issues setting up k3sup. The utility
would not run the proper SSH commands due to
my terminal not being connected to a TTY device.
This can be fixed with
passwordless SSH
and adding your user to sudoers without a password
using the visudo command

<user>  ALL=(ALL) NOPASSWORD: ALL

I do not normally recommend doing this as
passwordless sudo is a security vulnerability

⚠ By default k3s will install containers using
containerd. Some of the
operators I'll be using later will use
Docker Manifest.
Docker will have to be installed as a CNI.

Installing Docker

Docker provides a convenience script which will
perform an express installation. Docker will need
to be installed on all cluster nodes.

curl -fsSL https://get.docker.com | sudo sh -
Enter fullscreen mode Exit fullscreen mode

Installing k3s

With Docker installed, it's time to set up the
Kubernetes cluster using k3s using k3sup.

On the master node, run:

k3sup install --user manager --ip <external-ip> --k3s-extra-args '--docker'
Enter fullscreen mode Exit fullscreen mode

On the compute node, run:

k3sup join --ip <node-ip> --server-ip <external-ip> --user manager --k3s-extra-args '--docker'
Enter fullscreen mode Exit fullscreen mode

With these commands, your Kubernetes cluster with
k3s should be active. You can begin to experiment with
Kubernetes in your home lab!

⚠ There's an issue with k3s where iptables rules drops requests to 10.43.0.1:443 when using
Docker and Debian. I'm not sure how to fix this issue so
I moved to Ubuntu.

Resources

ℹ Note: Stay tuned for a guide on how to set up Kubernetes resources using Terraform

Top comments (0)

Read next

yunwei37 profile image

eBPF Tutorial by Example: Capturing TCP Information with XDP

云微 -

vijay431 profile image

Streamlining AWS Secret Management: A Bash Script for Efficient onboarding of secrets into pipeline

Vijay Gangatharan -

thenjdevopsguy profile image

Using Nvidia GPUs With Docker In 5 Minutes

Michael Levan -

willvelida profile image

Installing the Dapr extension for Azure Kubernetes Service with Terraform

Will Velida -