DEV Community

Cover image for NATS with Kubernetes
Karan Pratap Singh
Karan Pratap Singh

Posted on • Updated on

NATS with Kubernetes

#kubernetes #opensource

In the last article, we got started with NATS by trying it locally, but the question of running it in production still remains. So in this article we'll setup NATS with Kubernetes.

Note: All the code from this article will be available in this repository.

Prerequisites

minikube

To try out our setup locally, we'll use Minikube and Kubectl. So let's start our local kubernetes cluster.

$ minikube start
😄  minikube v1.25.1 on Darwin 11.6.2
✨  Using the virtualbox driver based on existing profile
👍  Starting control plane node minikube in cluster minikube
🏃  Updating the running virtualbox "minikube" VM ...
🐳  Preparing Kubernetes v1.23.1 on Docker 20.10.12 ...
    ▪ kubelet.housekeeping-interval=5m
🔎  Verifying Kubernetes components...
    ▪ Using image gcr.io/k8s-minikube/storage-provisioner:v5
🌟  Enabled addons: storage-provisioner, default-storageclass
🏄  Done! kubectl is now configured to use "minikube" cluster and "default" namespace by default
Enter fullscreen mode Exit fullscreen mode

Minimal setup

For our minimal setup, we can use a simple deployment and service. This can also be used during development or to try NATS with the minimal number of components.

Deployment

Let's declare our deployement in deployment.yml

apiVersion: apps/v1
kind: Deployment
metadata:
  name: nats
spec:
  replicas: 1
  strategy: {}
  selector:
    matchLabels:
      app: nats
  template:
    metadata:
      labels:
        app: nats
    spec:
      containers:
        - name: nats
          image: nats:2.7.0-alpine
          ports:
            - containerPort: 4222
Enter fullscreen mode Exit fullscreen mode

Service

Let's declare a service in a service.yml file and expose our deployment.

apiVersion: v1
kind: Service
metadata:
  name: nats
spec:
  selector:
    app: nats
  ports:
    - port: 4222
Enter fullscreen mode Exit fullscreen mode

Finally, let's apply our configurations with kubectl

$ kubectl apply -f deployment.yml
$ kubectl apply -f service.yml
Enter fullscreen mode Exit fullscreen mode 
$ kubectl get deployments
NAME   READY   UP-TO-DATE   AVAILABLE   AGE
nats   1/1     1            1           81s
Enter fullscreen mode Exit fullscreen mode 
$ kubectl get service
NAME   READY   UP-TO-DATE   AVAILABLE   AGE
nats   1/1     1            1           21s
Enter fullscreen mode Exit fullscreen mode

Check our logs...

$ kubectl logs service/nats
[1] 2022/01/28 16:14:30.897212 [INF] Starting nats-server
[1] 2022/01/28 16:14:30.897266 [INF]   Version:  2.7.0
[1] 2022/01/28 16:14:30.897268 [INF]   Git:      [not set]
[1] 2022/01/28 16:14:30.897272 [INF]   Name:     NDNJ3HKFIBVY4IA47E64VFTDI5CNBFYQUJGRM3IIVMSSEHAP4LS3JZM4
[1] 2022/01/28 16:14:30.897275 [INF]   ID:       NDNJ3HKFIBVY4IA47E64VFTDI5CNBFYQUJGRM3IIVMSSEHAP4LS3JZM4
[1] 2022/01/28 16:14:30.897291 [INF] Using configuration file: /etc/nats/nats-server.conf
[1] 2022/01/28 16:14:30.898080 [INF] Starting http monitor on 0.0.0.0:8222
[1] 2022/01/28 16:14:30.899187 [INF] Listening for client connections on 0.0.0.0:4222
[1] 2022/01/28 16:14:30.900983 [INF] Server is ready
[1] 2022/01/28 16:14:30.902026 [INF] Cluster name is my_cluster
[1] 2022/01/28 16:14:30.902063 [INF] Listening for route connections on 0.0.0.0:6222
Enter fullscreen mode Exit fullscreen mode

Cleanup
Let's cleanup our resources!

$ kubectl delete -f service.yml -f deployment.yml
service "nats" deleted
deployment.apps "nats" deleted
Enter fullscreen mode Exit fullscreen mode

High availability setup

In order to have higher availability we can setup NATS servers to run in a clustering mode. Here, we will setup a 3 node NATS cluster.

Note: More than one node should be available in your Kubernetes cluster in order for this to work. So in case of deploying onto minikube please try the single node installer instead

Configmap

apiVersion: v1
kind: ConfigMap
metadata:
  name: nats-config
data:
  nats.conf: |
    pid_file: "/var/run/nats/nats.pid"
    http: 8222

    cluster {
      port: 6222
      routes [
        nats://nats-0.nats.default.svc:6222
        nats://nats-1.nats.default.svc:6222
        nats://nats-2.nats.default.svc:6222
      ]

      cluster_advertise: $CLUSTER_ADVERTISE
      connect_retries: 30
    }

    leafnodes {
      port: 7422
    }
Enter fullscreen mode Exit fullscreen mode

Service

apiVersion: v1
kind: Service
metadata:
  name: nats
  labels:
    app: nats
spec:
  selector:
    app: nats
  clusterIP: None
  ports:
    - name: client
      port: 4222
    - name: cluster
      port: 6222
    - name: monitor
      port: 8222
    - name: metrics
      port: 7777
    - name: leafnodes
      port: 7422
    - name: gateways
      port: 7522
Enter fullscreen mode Exit fullscreen mode

Let's start our resources.

$ kubectl apply -f configmap.yml -f service.yml -f statefulset.yaml
configmap/nats-config created
service/nats created
statefulset.apps/nats created
Enter fullscreen mode Exit fullscreen mode

Check our logs...

$ kubectl logs statefulsets/nats
[8] 2022/01/28 16:25:54.710676 [INF] Starting nats-server
[8] 2022/01/28 16:25:54.710724 [INF]   Version:  2.7.0
[8] 2022/01/28 16:25:54.710728 [INF]   Git:      [not set]
[8] 2022/01/28 16:25:54.710732 [INF]   Name:     NARIIE65ZKD6O4HCL53K4HVZ4Q2EDYLMFVLYOV66NDJHO5I6XRCIOJMM
[8] 2022/01/28 16:25:54.710737 [INF]   ID:       NARIIE65ZKD6O4HCL53K4HVZ4Q2EDYLMFVLYOV66NDJHO5I6XRCIOJMM
[8] 2022/01/28 16:25:54.710758 [INF] Using configuration file: /etc/nats-config/nats.conf
[8] 2022/01/28 16:25:54.711562 [INF] Starting http monitor on 0.0.0.0:8222
[8] 2022/01/28 16:25:54.711624 [INF] Listening for leafnode connections on 0.0.0.0:7422
[8] 2022/01/28 16:25:54.713372 [INF] Listening for client connections on 0.0.0.0:4222
[8] 2022/01/28 16:25:54.713718 [INF] Server is ready
[8] 2022/01/28 16:25:54.713844 [INF] Cluster name is i9dhpw0tcqKR40VL6ni1U8
[8] 2022/01/28 16:25:54.713986 [WRN] Cluster name was dynamically generated, consider setting one
[8] 2022/01/28 16:25:54.714161 [INF] Listening for route connections on 0.0.0.0:6222
Enter fullscreen mode Exit fullscreen mode

Cleanup
Let's cleanup!

$ kubectl apply -f service.yml
configmap "nats-config" deleted
service "nats" deleted
statefulset.apps "nats" deleted
Enter fullscreen mode Exit fullscreen mode

Helm

Great! we're done with our HA setup. But what if we want to deploy another server? At some point, writing and maintaining multiple configuration files becomes a chore. So, let's see how we can make use of Helm which helps us define, install, and upgrade even the most complex Kubernetes applications.

Adding a helm repo

First, we'll start by adding the official NATS helm repo

$ helm repo add nats https://nats-io.github.io/k8s/helm/charts/
"nats" has been added to your repositories
Enter fullscreen mode Exit fullscreen mode 
$ helm repo update
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "nats" chart repository
Update Complete. ⎈Happy Helming!⎈
Enter fullscreen mode Exit fullscreen mode 
$ helm repo list
NAME    URL
nats    https://nats-io.github.io/k8s/helm/charts/
Enter fullscreen mode Exit fullscreen mode

Now that we've added our helm repo, let's give it a try by simply installing our helm chart.

$ helm install my-app nats/nats
NAME: my-app
LAST DEPLOYED: Wed Feb  2 12:10:59 2022
NAMESPACE: default
STATUS: deployed
REVISION: 1
NOTES:
You can find more information about running NATS on Kubernetes
in the NATS documentation website:

  https://docs.nats.io/nats-on-kubernetes/nats-kubernetes

NATS Box has been deployed into your cluster, you can
now use the NATS tools within the container as follows:

  kubectl exec -n default -it deployment/my-app-box -- /bin/sh -l

  nats-box:~# nats-sub test &
  nats-box:~# nats-pub test hi
  nats-box:~# nc my-nats 4222

Thanks for using NATS!
Enter fullscreen mode Exit fullscreen mode

Awesome! Helm just deployed a production ready NATS server with just one command. But what resources did it create?

$ kubectl get all
NAME                               READY   STATUS    RESTARTS   AGE
pod/my-app-0                      3/3     Running   0          3m37s
pod/my-app-box-594cdf8cd7-5vfgj   1/1     Running   0          3m37s

NAME                 TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)                                                 AGE
service/kubernetes   ClusterIP   10.96.0.1    <none>        443/TCP                                                 47h
service/my-app       ClusterIP   None         <none>        4222/TCP,6222/TCP,8222/TCP,7777/TCP,7422/TCP,7522/TCP   3m37s

NAME                          READY   UP-TO-DATE   AVAILABLE   AGE
deployment.apps/my-app-box    1/1     1            1           3m37s

NAME                                     DESIRED   CURRENT   READY   AGE
replicaset.apps/my-app-box-594cdf8cd7    1         1         1       3m37s

NAME                       READY   AGE
statefulset.apps/my-app    1/1     3m37s
Enter fullscreen mode Exit fullscreen mode

As we can see it created all the required resources like deployments, services, stateful sets, config maps etc for running a highly available NATS server in our Kubernetes cluster. Now we should be able to fit this to our needs and upgrade our application by configuring things like limits, logging, TLS, clustering, leafnodes etc. much easily.

Cleanup

Let's do a quick cleanup so we don't leave it running on our machine!

$ helm uninstall my-nats
release "my-nats" uninstalled
Enter fullscreen mode Exit fullscreen mode

Note: If you want more of a managed solution for your NATS server, make sure to look into NGS which is an easy to use, secure by default, global communications system built on NATS.io available in all the major cloud providers.

Conclusion

For more info, make sure to visit official documentation at nats.io. I hope this was helpful!

Top comments (0)

Read next

anmolbaranwal profile image

Build a Full-Stack app using these React libraries and cloud backend.

Anmol Baranwal -

surajvast profile image

##Redis Rapid Reference: Mastering All Commands with PowerShell 🚀💡✨🔮

Shubham Srivastava -

vtnorton profile image

Como fiz o Infinite Craft ser multiplayer com algumas linhas de código

Vitor Norton -

justanordinaryperson profile image

Reducing Bundle size of a Frontend application by optimizing Lodash imports

Keertivaas S -