0. Background
1. Create the dedicated user and group
2. Create the celery configuration file
3. Create the systemd file
4. Restart the server
5. References
0. Background
Three months ago, I deployed my react, Django project on a ubuntu server. I used celery for a task queue. Today I tried to look celery environment and I got confused about the files and my celery configuration. Now In this post, I will try to explain all the things that you should know about the celery configuration on the server.
If you never heard about celery, check out the celery official documentation, First steps with celery and First steps with Django before reading this post.
In the celery official documentation, you will find the three possible ways to daemoniz your celery with python, i.e. init-script, Init-script: celerybeat and using systemd. In this post, I will only explain about the systemd demonization.
1. Create the dedicated user and group
First of all, you need to create the dedicated user and group as celery,
sudo groupadd celery
sudo useradd -g celery celery
2. Create the celery configuration file
Now let's create the celery configuration file inside the /etc/default/celeryd directory,
Note: Please replace the user with your ubuntu user, CELERY_APP_NAME, CELERYD_CHDIR, and CELERY_BIN.
# most people will only start one node:
CELERYD_NODES="worker1"
# but you can also start multiple and configure settings
# for each in CELERYD_OPTS
#CELERYD_NODES="worker1 worker2 worker3"
# alternatively, you can specify the number of nodes to start:
#CELERYD_NODES=10
# Absolute or relative path to the 'celery' command:
CELERY_BIN="/home/user/.virtualenvs/venv/bin/celery"
#CELERY_BIN="/virtualenvs/def/bin/celery"
# App instance to use
# comment out this line if you don't use an app
CELERY_APP="celery_app_name"
# or fully qualified:
#CELERY_APP="proj.tasks:app"
# Where to chdir at start.
CELERYD_CHDIR="/home/user/django-project/"
# Extra command-line arguments to the worker
CELERYD_OPTS="--time-limit=300 --concurrency=8"
# Configure node-specific settings by appending node name to arguments:
#CELERYD_OPTS="--time-limit=300 -c 8 -c:worker2 4 -c:worker3 2 -Ofair:worker1"
# Set logging level to DEBUG
#CELERYD_LOG_LEVEL="DEBUG"
# %n will be replaced with the first part of the node name.
CELERYD_LOG_FILE="/var/log/celery/%n%I.log"
CELERYD_PID_FILE="/var/run/celery/%n.pid"
# Workers should run as an unprivileged user.
# You need to create this user manually (or you can choose
# a user/group combination that already exists (e.g., nobody).
CELERYD_USER="celery"
CELERYD_GROUP="celery"
CELERYD_LOG_LEVEL="INFO"
# If enabled PID and log directories will be created if missing,
# and owned by the userid/group configured.
CELERY_CREATE_DIRS=1
Now lets change the owner of the celery log and PID file,
chown -R celery:celery /var/log/celery/
chown -R celery:celery /var/run/celery/
3. Create the systemd file
Now lets create the systemd file inside /etc/systemd/system/celery.service directory and write following content,
Note: Please replace the user with your ubuntu user and make sure to check the path to bin celery file (this file will available probably inside your virtual environment)
[Unit]
Description=Celery Service
After=network.target
[Service]
Type=forking
User=celery
Group=celery
EnvironmentFile=/etc/default/celeryd
WorkingDirectory=/home/user/django-project
ExecStart=/home/user/.virtualenvs/venv/bin/celery multi start ${CELERYD_NODES} \
-A ${CELERY_APP} --pidfile=${CELERYD_PID_FILE} \
--logfile=${CELERYD_LOG_FILE} --loglevel=${CELERYD_LOG_LEVEL} ${CELERYD_OPTS}
ExecStop=/home/user/.virtualenvs/venv/bin/celery ${CELERY_BIN} multi stopwait ${CELERYD_NODES} \
--pidfile=${CELERYD_PID_FILE}
ExecReload=/home/user/.virtualenvs/venv/bin/celery ${CELERY_BIN} multi restart ${CELERYD_NODES} \
-A ${CELERY_APP} --pidfile=${CELERYD_PID_FILE} \
--logfile=${CELERYD_LOG_FILE} --loglevel=${CELERYD_LOG_LEVEL} ${CELERYD_OPTS}
[Install]
WantedBy=multi-user.target
4. Restart the server
Now everything is setup. Now you just need to restart the service
sudo systemctl daemon-reload
sudo systemctl enable celery
sudo systemctl restart celery
Now your celery is ready to use in production. You can check the status of the celery manually by typing following code,
celery -A CELERY_APP_NAME worker -l INFO
Latest comments (8)
░░ A start job for unit celery.service has begun execution.
░░
░░ The job identifier is 150348.
Apr 07 03:59:15 crmBeta systemd[2022889]: celery.service: Changing to the requested working directory failed: No such file or directory
Apr 07 03:59:15 crmBeta systemd[2022889]: celery.service: Failed at step CHDIR spawning /home/anurag/RallyCRM/env/bin/celery: No such file or directory
░░ Subject: Process /home/anurag/RallyCRM/env/bin/celery could not be executed
░░ Defined-By: systemd
░░ Support: http://www.ubuntu.com/support
░░
░░ The process /home/anurag/RallyCRM/env/bin/celery could not be executed and failed.
I am getting this error, though that file is there, any help?
Excelente, me ha servido mucho esta publicación.....!!!!
Glad that I can help you!
Your post really helped me. But I have a question. How to configure multiple celery instances ?
Hey, I am getting some permission errors. When I checked the logs, I found this:
celery.platforms.LockFailed: [Errno 13] Permission denied: '/var/run/celery/worker.pid'. But I followed each and every step. What am I doing wrong?You can create the required folder and change the permission like this,
I really liked this post. You helped me a lot!!!! thanks.
Glad you like it!