DEV Community

Allen D. Ball
Allen D. Ball

Posted on • Updated on • Originally published at blog.hcf.dev

automount/autofs Executable Map for Amazon EBS Volumes

Amazon Web Services (AWS) provides their Elastic Block Store (EBS) service for persistent block storage for Amazon Elastic Compute Cloud (EC2) instances in the AWS cloud. Linux/UNIX file systems may be created on these volumes and then attached to an instance and subsequently mounted as a file system. However, the EC2 instance must be started before the volume can be attached which may lead to significant challenges in architecture design as both the numbers of instances and volumes increase.

This article presents an implementation of an executable automount map which may be leveraged to attach and mount EBS volumes on demand. The implementation includes a mechanism for detaching unmounted EBS volumes so they me be attached to different instances in the future.

Theory of Operation

EBS volumes must be prepared with file systems and must be tagged with fstype and uuid. The fstype value must accurately reflect the the volume's file system type and must be supported by the EC2 instance. The uuid tag must contain the file system partition UUID.1

The volumes are attached and mounted on demand through an Executable Autofs Map. systemd is configured to monitor the corresponding autofs mount point to detect when the automount daemon unmounts a file system and then detach the volume from the EC2 instance.

Implementation

EBS volumes are attached with the auto.ebs Executable Map and are detached with systemd auto.ebs-detach.service (each described in the following subsections.

The scripts herein rely on shell functions defined in /etc/aws.rc described later in this article. Most functions are straightforward wrappers to the corresponding AWS Command Line Interface.

auto.ebs Executable Map

The auto.ebs Executable Map consists of two configuration files:

/
└── etc
    ├── auto.ebs
    └── auto.master.d
        └── ebs.autofs
Enter fullscreen mode Exit fullscreen mode

The work is done by the /etc/auto.ebs script. The volume must be properly formatted as a file system and it must have accurate fstype and uuid tags. If the volume is "available," it is simply attached to a block device and its map entry is constructed based on the fstype and uuid tags.

If the volume is "in-use," but if the volume is attached to this instance, then a map entry is returned as follows:

  1. If the volume is the special case of matching the AMI block device, a map entry with fstype=bind,symlink with a target of / is returned, else,
  2. If the volume is already mounted to this instance (outside the autofs map), a map entry with fstype=bind,symlink with a target of the volume's mount point is returned, else,
  3. The behavior is the same as if the volume was "available" (described above)
#!/bin/bash
# ----------------------------------------------------------------------------
# /etc/auto.ebs
# ----------------------------------------------------------------------------
. /etc/aws.rc

# auto-ebs-entry key(volume)
auto-ebs-entry() {
    local key="$1"
    local value=""

    local fstype=$(ec2-get-tag-value ${key} fstype)
    local uuid=$(ec2-get-tag-value ${key} uuid)

    case $(ec2-get-volume-state ${key}) in
        available)
            if [ "${fstype}" != "" -a "${uuid}" != "" ]; then
                ec2-attach-volume ${key} $(next-unattached-block-device) 1>&2

                value="-fstype=${fstype} :UUID=${uuid}"
            fi
            ;;

        in-use)
            local instance="$(ec2-get-volume-attachment-instance ${key})"
            local state="$(ec2-get-volume-attachment-state ${key})"

            if [ "${instance}" == "${INSTANCE}" -a "${state}" == "attached" ]; then
                local device="$(ec2-get-volume-attachment-device ${key})"

                if [ "$(metadata block-device-mapping/ami)" == "${device}" ]; then
                    value="-fstype=bind,symlink :/"
                else
                    local mntpt=$(lsblk -no MOUNTPOINT ${device})

                    if [ "${mntpt}" != "" ]; then
                        value="-fstype=bind,symlink :${mntpt}"
                    elif [ "${fstype}" != "" -a "${uuid}" != "" ]; then
                        value="-fstype=${fstype} :UUID=${uuid}"
                    fi
                fi
            else
                echo "${key} already in-use" 1>&2
            fi
            ;;

        *)
            echo "Cannot mount ${key}" 1>&2
            ;;
    esac

    echo "$0: key=\"${key}\" value=\"${value}\"" 1>&2

    if [ "${value}" != "" ]; then
        echo "${value}"
    fi
}

auto-ebs-entry $1
Enter fullscreen mode Exit fullscreen mode

The /ebs mount point and associated executable map script must be configured in /etc/auto.master.d/ebs.autofs.

# /etc/auto.master.d/ebs.autofs
/ebs    /etc/auto.ebs
Enter fullscreen mode Exit fullscreen mode

systemd auto.ebs-detach.service

systemd is configured to monitor the /ebs map mount directory and invoke /etc/auto.ebs-detach.sh whenever the directory changes. This script is responsible for detaching any volumes that are no longer mounted. /usr/lib/systemd/system/auto.ebs-detach.service configures /etc/auto.ebs-detach.sh as a service and /usr/lib/systemd/system/auto.ebs-detach.path configures systemd to monitor /ebs.

/
├── etc
│   └── auto.ebs-detach.sh
└── usr
    └── lib
        └── systemd
            └── system
                ├── auto.ebs-detach.path
                └── auto.ebs-detach.service
Enter fullscreen mode Exit fullscreen mode

Since the only reliable event2 that is available to monitor is a change to /ebs directory, each attached volume must be checked in each invocation.

#!/bin/bash
# ----------------------------------------------------------------------------
# /etc/auto.ebs-detach.sh
# ----------------------------------------------------------------------------
. /etc/aws.rc

# detach-volume-if-not-mounted key(volume)
detach-volume-if-not-mounted() {
    local key="$1"
    local instance="$(ec2-get-volume-attachment-instance ${key})"
    local state="$(ec2-get-volume-attachment-state ${key})"

    if [ "${instance}" == "${INSTANCE}" -a "${state}" == "attached" ]; then
        local device="$(ec2-get-volume-attachment-device ${key})"

        if [ "$(metadata block-device-mapping/ami)" != "${device}" ]; then
            local mntpt=$(lsblk -no MOUNTPOINT ${device})

            if [ "${mntpt}" == "" ]; then
                ec2-detach-volume ${key}
            fi
        fi
    fi
}

for volume in $(list-attached-volumes); do
    detach-volume-if-not-mounted ${volume}
done

exit 0
Enter fullscreen mode Exit fullscreen mode

/usr/lib/systemd/system/auto.ebs-detach.service defines the script as a service.

# /usr/lib/systemd/system/auto.ebs-detach.service
[Unit]
Description=/etc/auto.ebs-detach.sh
After=autofs.service

[Service]
Type=oneshot
ExecStart=/etc/auto.ebs-detach.sh

[Install]
WantedBy=multi-user.target
Enter fullscreen mode Exit fullscreen mode

/usr/lib/systemd/system/auto.ebs-detach.path configures systemd to monitor /ebs.

# /usr/lib/systemd/system/auto.ebs-detach.path
[Unit]
Description=PathModified=/ebs/ /etc/auto.ebs-detach.sh

[Path]
PathModified=/ebs/

[Install]
WantedBy=multi-user.target
Enter fullscreen mode Exit fullscreen mode

Ansible Role

The Ansible tasks and handlers configure the autofs /ebs map.

# tasks/main.yml
---
- name: auto.ebs config files
  template:
    src: "{{ item.path }}"
    dest: "/{{ item.path }}"
    mode: "{{ item.mode }}"
  with_items:
    - { path: etc/auto.master.d/ebs.autofs, mode: "0644" }
    - { path: etc/auto.ebs, mode: "0755" }
    - { path: etc/auto.ebs-detach.sh, mode: "0755" }
    - { path: usr/lib/systemd/system/auto.ebs-detach.service, mode: "0644" }
    - { path: usr/lib/systemd/system/auto.ebs-detach.path, mode: "0644" }
  notify: [ 'reload systemd', 'restart autofs' ]

- name: enable auto.ebs-detach.service
  service:
    name: "{{ item }}"
    enabled: yes
    state: started
  with_items:
    - auto.ebs-detach.service
    - auto.ebs-detach.path
  notify: [ 'reload systemd' ]
Enter fullscreen mode Exit fullscreen mode
# handlers/main.yml
---
- name: reload systemd
  systemd: daemon_reload=yes

- name: restart autofs
  service: name=autofs enabled=yes state=restarted
Enter fullscreen mode Exit fullscreen mode

SELinux Policies

If Security-Enhanced Linux (SELinux) is installed and enabled, the security policies need to be adjusted to allow the scripts access to some resources.

module local-automount 1.0;

require {
    type ldconfig_exec_t;
    type automount_t;
    type fixed_disk_device_t;
    class blk_file getattr;
    class file { execute execute_no_trans open read };
}

#============= automount_t ==============
allow automount_t fixed_disk_device_t:blk_file getattr;
allow automount_t ldconfig_exec_t:file { execute execute_no_trans open read };
Enter fullscreen mode Exit fullscreen mode

These policies may be installed with the combination of the checkmodule/semodule_package/semodule commands. The following is added to the Ansible tasks/main.yml.

- name: SELinux Policies
  set_fact:
    policies:
      - local-automount

- name: SELinux (*.te)
  template:
    src: "selinux/{{ item }}.te"
    dest: "/etc/selinux/tmp/{{ item }}.te"
  with_items:
    - "{{ policies }}"
  register: te
  when: >
    ansible_selinux is defined
    and ansible_selinux != False
    and ansible_selinux.status == 'enabled'

- name: SELinux - checkmodule
  command: >
    chdir=/etc/selinux/tmp creates={{ item }}.mod
    checkmodule -M -m -o {{ item }}.mod {{ item }}.te
  with_items:
    - "{{ policies }}"
  register: mod
  when: te.changed

- name: SELinux - semodule_package
  command: >
    chdir=/etc/selinux/tmp creates={{ item }}.pp
    semodule_package -o {{ item }}.pp -m {{ item }}.mod
  with_items:
    - "{{ policies }}"
  register: pp
  when: mod.changed

- name: SELinux - semodule
  command: >
    chdir=/etc/selinux/tmp
    semodule -i {{ item }}.pp
  with_items:
    - "{{ policies }}"
  when: pp.changed
Enter fullscreen mode Exit fullscreen mode

Developing the SELinux polices will be the subject of a future entry.

/etc/aws.rc

/etc/aws.rc provides the common shell functions used by the scripts described above. In addition, the volume-mkfs and new-volume-mkfs shell functions demonstrate the necessary tags for file system volumes to be managed by the /ebs map.

#!/bin/bash
# ----------------------------------------------------------------------------
# /etc/aws.rc
# ----------------------------------------------------------------------------
# Functions
# ----------------------------------------------------------------------------
# metadata data
metadata() {
    curl -s http://169.254.169.254/latest/meta-data/$1
}

export ZONE=$(metadata placement/availability-zone)
export REGION=$(echo ${ZONE} | sed 's/\(.*\)[a-z]/\1/')
export INSTANCE=$(metadata instance-id)

# ec2 command [argument ...]
ec2() {
    aws ec2 --region ${REGION} "$@"
}

# ec2-get-tag-value resource-id key
ec2-get-tag-value() {
    ec2 describe-tags \
        --filters Name=resource-id,Values="$1" Name=key,Values="$2" \
        --output text --query 'Tags[*].Value'
}

# ec2-set-tag-value resource-id key value
ec2-set-tag-value() {
    ec2 delete-tags --resources "$1" --tags Key="$2"
    ec2 create-tags --resources "$1" --tags Key="$2",Value="$3"
}

# ec2-get-volume-state volume-id
ec2-get-volume-state() {
    ec2 describe-volumes \
        --volume-ids "$1" \
        --output text --query 'Volumes[].State'
}

# ec2-get-volume-attachment-instance volume-id
ec2-get-volume-attachment-instance() {
    local value=$(ec2 describe-volumes \
                      --volume-ids "$1" \
                      --query 'Volumes[].Attachments[].InstanceId' \
                      --output text)

    echo ${value}
}

# ec2-get-volume-attachment-state volume-id
ec2-get-volume-attachment-state() {
    local value=$(ec2 describe-volumes \
                      --volume-ids "$1" \
                      --query 'Volumes[].Attachments[].State' \
                      --output text)

    echo ${value}
}

# ec2-get-volume-attachment-device volume-id
ec2-get-volume-attachment-device() {
    local value=$(ec2 describe-volumes \
                      --volume-ids "$1" \
                      --query 'Volumes[].Attachments[].Device' \
                      --output text)

    echo ${value}
}

# ec2-attach-volume volume-id device
ec2-attach-volume() {
    echo $(ec2 attach-volume \
               --instance-id ${INSTANCE} --volume-id "$1" --device "$2" \
               --output text) 1>&2
    ec2 wait volume-in-use --volume-ids "$1"

    while [ "$(ec2-get-volume-attachment-state $1)" != "attached" ]; do
        sleep 15
    done
}

# ec2-detach-volume volume-id
ec2-detach-volume() {
    echo $(ec2 detach-volume \
               --instance-id ${INSTANCE} --volume-id "$1" \
               --output text) 1>&2
    ec2 wait volume-available --volume-ids "$1"
}

# list-attached-volumes
list-attached-volumes() {
    local value=$(ec2 describe-instances \
                      --instance-ids ${INSTANCE} \
                      --output text \
                      --query 'Reservations[].Instances[].BlockDeviceMappings[].Ebs.VolumeId')

    echo ${value}
}

# next-unattached-block-device
next-unattached-block-device() {
    local attached=($(lsblk -ndo NAME))
    local available=($(echo -e ${attached[0]:0:-1}{a..z}\\n))

    for name in "${attached[@]}"; do
        available=(${available[@]//*${name}*})
    done

    echo /dev/${available[0]}
}

# volume-mkfs volume-id device fstype
volume-mkfs() {
    mkfs -t "$3" "$2"

    local uuid=""
    while [ -z "${uuid}" ]; do
        uuid=$(lsblk -no UUID ${device})
        sleep 10
    done

    ec2-set-tag-value "$1" fstype "$3"
    ec2-set-tag-value "$1" uuid ${uuid}
}

# new-volume-mkfs volume-type size fstype
new-volume-mkfs() {
    local volume=$(ec2 create-volume \
                       --availability-zone ${ZONE} \
                       --volume-type "$1" --size "$2" \
                       --output text --query 'VolumeId')

    ec2 wait volume-available --volume-ids ${volume}

    local device=$(next-unattached-block-device)

    ec2-attach-volume ${volume} ${device} 1>&2

    volume-mkfs ${volume} ${device} "$3" 1>&2

    ec2-detach-volume ${volume} 1>&2

    echo ${volume}
}
Enter fullscreen mode Exit fullscreen mode

References

[1] The aws.rc script included at the end of this article includes shell functions for allocating, formatting, and tagging EBS volumes as file systems.

[2] The author investigated implementations based on incrond(8) and inotifywait(1) but settled on systemd as it appears to be the greatest common denominator for Linux distributions.

Top comments (0)