DEV Community

Cover image for Building your library: Part 1
Tobias Barth
Tobias Barth

Posted on • Updated on • Originally published at tobias-barth.net

Building your library: Part 1

Preface

This article is part 4 of the series "Publish a modern JavaScript (or TypeScript) library". Check out the motivation and links to other parts in the introduction.

Note: I have promised in part 3 of this series that the next post would be about exporting types. But bear with me. First we will use what we have. Types are coming up next.

Our first build

Up until now we have discussed how to set up Babel or the TypeScript Compiler, respectively, for transpiling our thoughtfully crafted library code. But we didn't actually use them. After all, the goal for our work here should be a fully functioning build chain that does everything we need for publishing our library.

So let's start this now. As you can tell from the title of this article, we will refine our build with every item in our tool belt that we installed and configured. While the "normal" posts each focus on one tool for one purpose, these "build" articles will gather all configurations of our various tool combinations that we have at our disposal.

We will leverage NPM scripts to kick off everything we do. For JavaScript/TypeScript projects it's the natural thing to do: You npm install and npm test and npm start all the time, so we will npm run build also.

For today we will be done with it relatively quickly. We only have the choice between Babel and TSC and transpiling is the only thing that we do when we build.

Build JavaScript with Babel

You define a build script as you may now in the package.json file inside of the root of your project. The relevant keys are scripts and module and we change it so that they contain at least the following:

{
  // ...
  "module": "dist/index.js",
  "scripts": {
    "build": "babel -d dist/ src/"
  }
  // ...
}
Enter fullscreen mode Exit fullscreen mode

Using module

The standard key to point to the entry file of a package is main. But we are using module here. This goes back to a proposal by the bundler Rollup. The idea here is that the entry point under a main key is valid ES5 only. Especially regarding module syntax. The code there should use things like CommonJS, AMD or UMD but not ESModules. While bundlers like Webpack and Rollup can deal with legacy modules they can't tree-shake them. (Read the article on Babel again if you forgot why that is.)

Therefore the proposal states that you can provide an entry point under module to indicate that the code there is using modern ESModules. The bundlers will always look first if there is a module key in your package.json and in that case just use it. Only when they don't find it they will fall back to main.

Call Babel

The "script" under the name of build is just a single call to the Babel command line interface (CLI) with one option -d dist which tells Babel where to put the transpiled files (-d : --out-dir). Finally we tell it where to find the source files. When we give it a directory like src Babel will transpile every file it understands. That is, every file with an extension from the following list: .es6,.js,.es,.jsx,.mjs.

Build TypeScript with Babel

This is almost the same as above. The only difference is the options we pass to the Babel CLI. The relevant parts in package.json look like this:

{
  // ...
  "module": "dist/index.js",
  "scripts": {
    "build": "babel -d dist/ --extensions .ts,.tsx src/"
  }
  // ...
}
Enter fullscreen mode Exit fullscreen mode

As I mentioned above, Babel wouldn't know that it should transpile the .ts and .tsx files in src. We have to explicitly tell it to with the --extensions option.

Build TypeScript with TSC

For using the TypeScript Compiler we configure our build in the package.json like this:

{
  // ...
  "module": "dist/index.js",
  "scripts": {
    "build": "tsc"
  }
  // ...
}
Enter fullscreen mode Exit fullscreen mode

We don't have to tell TSC where to find and where to put files because it's all in the tsconfig.json. The only thing our build script has to do is calling tsc.

Ready to run

And that is it. All you have to do now to get production-ready code is typing

npm run build
Enter fullscreen mode Exit fullscreen mode

And you have your transpiled library code inside of the dist directory. It may not seem to be much but I tell you, if you were to npm publish that package or install it in one of the other ways aside from the registry it could be used in an application. And it would not be that bad. It may have no exported types, no tests, no contribution helpers, no semantic versioning and no build automation, BUT it ships modern code that is tree-shakable – which is more than many others have.

Be sure to check out the example code repository that I set up for this series. There are currently three branches: master, typescript and typescript-tsc. Master reflects my personal choice of tools for JS projects, typescript is my choice in TS projects and the third one is an alternative to the second. The README has a table with branches and their features.

Next up: Type-Checking and providing type declarations (and this time for real ;) )


As always many thanks to my friend Tim Kraut for proof-reading this article!

Top comments (0)