I did this setup on Raspberry Pi3 and Pi3+.
Probably, for Pi zero this setup needs an extra step. (Will be added)
Install berryconda
, tensorflow
, keras
, opencv
First change swapfile size
$ sudo vim /etc/dphys-swapfile
default 100MB --> 1024
$ sudo /etc/init.d/dphys-swapfile stop
$ sudo /etc/init.d/dphys-swapfile start
$ free -m
total used free shared buff/cache available
Mem: 875 65 378 11 431 747
Swap: 1023 0 1023
Install berryconda
# download berryconda
$ wget https://github.com/jjhelmus/berryconda/releases/download/v2.0.0/Berryconda3-2.0.0-Linux-armv7l.sh
$ chmod +x Berryconda3-2.0.0-Linux-armv7l.sh
$ ./Berryconda3-2.0.0-Linux-armv7l.sh
create virtual env & activate
$ conda create --name mlenv python=3.6
$ source activate mlenv
Install Tensorflow
This process takes so much time (my case almost an hour).
$ sudo apt-get install libatlas-base-dev
$ pip install --user tensorflow
$ pip list | grep tensor
DEPRECATION: The default format will switch to columns in the future. You can use --format=(legacy|columns) (or define a format=(legacy|columns) in your pip.conf under the [list] section) to disable this warning.
tensorboard (1.11.0)
tensorflow (1.11.0)
Install Keras
This process also takes so much time (my case almost an hour).
$ sudo apt install libhdf5-serial-dev
$ pip install h5py
$ pip install keras
Install OpenCV3
# Remove previous version
sudo apt autoremove libopencv3
# Install
wget https://github.com/mt08xx/files/raw/master/opencv-rpi/libopencv3_3.4.3-20180907.1_armhf.deb
sudo apt install -y ./libopencv3_3.4.3-20180907.1_armhf.deb
sudo ldconfig
Eventually, let's try run image classifier on Pi
This could take so much time.
$ git clone https://github.com/tensorflow/models.git
$ cd models/tutorials/image/imagenet
$ python classify_image.py
My Raspberry Pi note repo
https://github.com/koji/RaspberryPi-Note
Oldest comments (0)