DEV Community

Paula Gearon
Paula Gearon

Posted on • Updated on

More Immutability and Clojure

This is the second part to my post on immutability and Clojure.

Missing State

One advantage to having mutability is the ability to accumulate state. For instance, let's look at some data to process in JavaScript:

const data = [
  {label: "twilight", values: [10.0, 15.3]},
  {label: "apple", values: [12.0, 11.5, 18.1]},
  {label: "dash", values: [18.0]},
  {label: "pie", values: [13.0, 13.2, 44.8, 15.5]}
]
Enter fullscreen mode Exit fullscreen mode

Consider how we might get the average of all of those values. This can be done in multiple ways, but a straightforward approach is to accumulate the sum of all the values, while also accumulating the count.

let total = 0
let count = 0
data.forEach(function(d) {
  d.values.forEach(v => total += v)
  count += d.values.length
})
console.log("Average: " + (total / count))
Enter fullscreen mode Exit fullscreen mode

Average: 17.14

These accumulating values represent state, which the principles of immutability are trying to avoid. How might the same task be done without accumulating values like this?

Immutable in JavaScript

Rather than jumping straight to Clojure, let's look at this in JavaScript.

We need a total, and we need a total count. One way to get these is with the reduce operation to process an array into a single value. Let's start by creating a function that can add all the numbers in an array:

function sum(array) {
  return array.reduce((accumulator, element) => accumulator += element, 0)
}
Enter fullscreen mode Exit fullscreen mode

The accumulator here gets initialized with the 0 parameter, and is passed in as an argument for the arrow function at each step.
We can test this on a short array:

console.log(sum([1, 2, 3, 4, 5]))
Enter fullscreen mode Exit fullscreen mode

15

This can be used to sum the numbers across all the arrays:

const total = data.reduce((acc, element) => acc += sum(element.values), 0)
Enter fullscreen mode Exit fullscreen mode

We can add the counts similarly:

const count = data.reduce((acc, element) => acc += element.values.length, 0)
Enter fullscreen mode Exit fullscreen mode

This gives us the same answer:

console.log("Average: " + (total / count))
Enter fullscreen mode Exit fullscreen mode

Average: 17.14

However, the data had to be processed twice, once for calculating the total sum, and once for calculating the count. This could have serious ramifications if the data were particularly large, or if the processing were some other operation that required time-consuming I/O.

Immutable in Clojure

Before addressing this, let's look at the same operations and data in Clojure:

(def data [
  {:label "twilight", :values [10.0, 15.3]}
  {:label "apple", :values [12.0, 11.5, 18.1]}
  {:label "dash", :values [18.0]}
  {:label "pie", :values [13.0, 13.2, 44.8, 15.5]}])
Enter fullscreen mode Exit fullscreen mode

The sum function can be done a couple of ways, but if we stick to reduce:

(defn sum [array] (reduce + array))
Enter fullscreen mode Exit fullscreen mode

Now we can do the total and count. Clojure has some options that could make this easier, but transliterating the JavaScript gives:

(let [total (reduce (fn [acc element] (+ acc (sum (:values element)))) 0 data)
      total-count (reduce (fn [acc element] (+ acc (count (:values element)))) 0 data)]
  (println "Average:" (/ total total-count)))
Enter fullscreen mode Exit fullscreen mode

Average: 17.14

count is actually the name of the function in Clojure for getting the number of elements in something, so the var here has been renamed to total-count, but otherwise it's the same approach.

Regaining State

As mentioned above, each call to reduce is processing the data sequence again, which leads to redundant work. Instead, we want to be accumulating both values while processing the data. This can be done by accepting and returning both values at each step.

(let [[total total-count]
      (reduce (fn [[previous-total previous-count] element]
                [(+ previous-total (sum (:values element)))
                 (+ previous-count (count (:values element)))])
              [0 0] data)]
  (println "Average:" (/ total total-count)))
Enter fullscreen mode Exit fullscreen mode

There are a few things to notice here:

  • The function passed to reduce still takes 2 arguments.
  • The first argument to the function is "unpacked" into a pair of values.
  • The value returned from the function is a 2 element vector.
  • The "initial value" provided to reduce is also a 2 element vector containing the 2 initial values (both zero).
  • The final result of the reduce is a 2 element vector, which gets unpacked into the total and total-count.

This approach to returning multiple values is something that JavaScript also supports, and is similar to using tuples to return multiple values in Python. Other languages, like Java, struggle with this, resorting to cumbersome constructs like:

return new double[] { newTotal, newCount };
Enter fullscreen mode Exit fullscreen mode

And without an unpacking syntax, this becomes:

var result = callFunction();
double total = result[0];
double count = result[1];
Enter fullscreen mode Exit fullscreen mode

It works, and internally it's the same sort of thing that Clojure is doing, but it's messy to write, harder to read, and is also one of the many reasons why I stopped coding Java.

Regardless of the language, the state of the process is being accumulated in multiple values. At each step, the entire state is packaged up and passed in as a single parameter, along with the new data to process, and a packaged new state is returned.

A More Structured Approach

Vectors and tuples are not the only data structure that can be used to return multiple items that represent state. Clojure's map syntax is also useful, particularly as it allows each part of the state to be named:

(let [{:keys [total total-count]}
      (reduce (fn [{:keys [total total-count]} element]
                {:total (+ previous-total (sum (:values element)))
                 :total-count (+ previous-count (count (:values element)))})
              {:total 0 :total-count 0} data)]
  (println "Average:" (/ total total-count)))
Enter fullscreen mode Exit fullscreen mode

In a simple case like this, a vector makes more sense to accumulate the state, but as the state becomes larger and more complex, using a map to encapsulate the state begins to gain value.

When Mutation Makes Sense

While mutation leads to greater complexity of state, there are occasions when mutation can be useful. The most common structures for this are Atoms and Volatiles.

Mutation is rarely needed, meaning that when mutation starts to become useful the code is often more complex that simple examples. Consequently, the examples below are more complex than what I've presented before now. I have included them to show that Clojure can still make use of mutation, even while preferring immutable structures.

Counter Example

A counter could theoretically be kept in an immutable state map, but this would need to be passed around everywhere, which would be both cumbersome and would slow down the program. It is also possible to accidentally pass in an old state, thereby returning a duplicate number. Instead, a global mutating counter would be ideal for this task.

The Clojure Runtime has an internal nextID function to return a number that is always greater than previously returned values. The function is used internally by the gensym function. The user can even call it themselves:

(println (clojure.lang.RT/nextID))
(println (clojure.lang.RT/nextID))
Enter fullscreen mode Exit fullscreen mode

172
175

This could instead be implemented in Clojure using an Atom:

(def ^:private last-id (atom 0))

(defn next-id [] (swap! last-id inc))
Enter fullscreen mode Exit fullscreen mode

While Clojure actually implements this in Java, ClojureScript does it in native ClojureScript code with an atom.

The code above initializes the atom to 0, then every time the next-id function is called the number in the atom gets incremented and returned.

An atom is used here, because the operation could be called from anywhere, including in multiple threads at the same time. Atoms have very important properties that make them thread safe, meaning that multi-threaded applications won't encounter problems like duplicate values, or bad data.

Caching Example

Similarly, a mutating map containing a cache can be easier to manage than passing the cache in and out of every function that needs it.

Clojure's memoize function attaches an atom to a function to return previously calculated values. This can be valuable for expensive operations.

For instance, a function that naively calculates the nth Fibonacci number has exponential complexity:

(defn fib [n] (if (< n 2) n (+ (fib (dec n)) (fib (- n 2)))))
Enter fullscreen mode Exit fullscreen mode

This will work fine up to 30 or so, but after that you will start seeing delays. On my notebook, calling (fib 45) will take over 9 seconds. If I run it with an argument of 50 then it takes over 10 minutes. The SICP book has a good explanation of why this is exponential.

But if the function is memoized, then large numbers can be evaluated quickly without having to change the algorithm. We can do this by changing from defn to using an equivalent def/fn pair, and wrapping the function definition in a call to memoize.

(def fib (memoize (fn [n] (if (< n 2) n (+ (fib (dec n)) (fib (- n 2)))))))
Enter fullscreen mode Exit fullscreen mode

Now we can call (fib 90) and it will return immediately.

The code for memoize is relatively short:

(defn memoize
  [f]
  (let [mem (atom {})]
    (fn [& args]
      (if-let [e (find @mem args)]
        (val e)
        (let [ret (apply f args)]
          (swap! mem assoc args ret)
          ret)))))
Enter fullscreen mode Exit fullscreen mode

memoize returns a new function within the scope of an atom called mem. This atom contains a map which uses a sequence of function arguments as the keys, and previously calculated values as the mapped vals. If an entry for a seq of arguments doesn't exist, then those arguments are new. That leads to the original function getting run on the arguments, and the result gets stored in the atom's map before being returned.

core.cache Example

Understanding how to attach an atom to a function like this is very useful if you want a more intelligent cache, such as with core.cache. This library provides immutable objects, much like an immutable map, which can be held in an atom in a similar way to how memoize does it.

This is stepping up a level in complexity, but since I'm here, the following is a function that performs a similar job as memoize, but with an LRU cache from the core.cache library.

(require '[clojure.core.cache :as cache])
(defn lru-memoize
  [f]
  (let [mem (atom (cache/lru-cache-factory {}))]
    (fn [& args]
      (let [e (cache/lookup @mem args ::nil)]
        (if (= ::nil e)
          (let [ret (apply f args)]
            (swap! mem cache/miss args ret)
            ret)
          (do
            (swap! mem cache/hit args)
            e))))))
Enter fullscreen mode Exit fullscreen mode

By default, this holds up to 32 items in the cache, though it can be customized with an extra parameter to the lru-cache-factory function.

Local Mutation

The above examples show mutation at a global scale (or, potentially global, if a memoized function is to be accessible from anywhere). Because the scope of access is open, then the mutating objects must be thread-safe. But there are occasions where mutation might occur within a controlled block of code. In such cases, the small overhead associated with thread safety may be avoided by using a Volatile object.

Volatiles are implemented as a simple object in the host system (Java, JavaScript, C#, Dart, etc) with a single mutable field. To see how simple the implementation is, the Java version is:

final public class Volatile implements IDeref {
  volatile Object val;

  public Volatile(Object val) {
    this.val = val;
  }

  public Object deref() {
    return val;
  }

  public Object reset(Object newval) {
    return this.val = newval;
  }
}
Enter fullscreen mode Exit fullscreen mode

There's not much to it: You can create it, read the value in it, and change the value in it. This is the same as an Atom, but is not thread safe.

A Quick Discussion on Races

What do I mean by "not thread safe"? Notice how there are operations to read the value (via deref) and write to the value (via reset). This is no way to read a value and write back to it before another thread has a chance to change it on you. When a thread is trying to write a value before another thread can get to it, then this is referred to as a race. Races are bad.

As a simple example, consider an atom a with a number in it. If one thread (started with future) increments that number a large number of times, and another thread decrements it the same number of times, then we should see the original number come out at the end:

(let [a (atom 0)]
  (future (dotimes [n 100000] (swap! a inc)))
  (dotimes [n 100000] (swap! a dec))
  (Thread/sleep 500) ;; more than enough time to wait
  (println "Final value:" (deref a)))
Enter fullscreen mode Exit fullscreen mode

Final value: 0

The first thread should finish at around the same time as the main thread, but I added a short wait to ensure that it does. The operations take 80ms on my notebook, so half a second is ample time, and we can see that the final value is what we expected.

However, volatiles don't provide the guarantees that atoms do:

(let [a (volatile! 0)]
  (future (dotimes [n 100000] (vswap! a inc)))
  (dotimes [n 100000] (vswap! a dec))
  (Thread/sleep 500) ;; more than enough time to wait
  (println "Final value:" (deref a)))
Enter fullscreen mode Exit fullscreen mode

Final value: 6475

This number will be different every time, and is certainly not the 0 that was expected.

Incidentally, the time it takes my machine to run both threads operating on volatiles like this is 15ms. That's a lot faster than the 80ms that the atom implementation took, which is why volatiles are attractive.

Where Volatiles Make Sense

Since volatiles are not thread safe, it is important that they are only used in a context that cannot be accessed from outside the current thread. A typical example is within the confines of a function or let block.

One example might be to use a volatile to record information while processing data for another purpose. Let's start by creating a sequence of 1000 random numbers, from 0 to 100:

(def data (repeatedly 1000 #(rand-int 100)))
Enter fullscreen mode Exit fullscreen mode

Let's determine the sum of these numbers, but on the way, count how many of them are divisible by 7:

(let [sevens (volatile! 0)
      total (reduce (fn [acc n]
                      (when (zero? (mod n 7))
                        (vswap! sevens inc))
                      (+ acc n))
                    0 data)]
  (println "total:" total "sevens:" @sevens))
Enter fullscreen mode Exit fullscreen mode

Can this be done with extra state in the accumulator? Certainly. But as complexity of the code increases, then having state on the side like this can help to simplify. It can also be faster than creating temporary objects that contain the updated state.

Transducers

One of the most important reasons for using volatile values is for maintaining state throughout a process. The most common example of this is in Transducers. These are a group of functions that are used for processing a sequence, with one function handling the start, another handling the end, and a function for handling each element in the sequence.

If there is a need for a sequence processor to remember what it has already done, then the transducer can use a volatile to do it. One example of this is the dedupe function. It looks like this:

(defn dedupe
  ([]
   (fn [rf]
     (let [pv (volatile! ::none)]
       (fn
         ([] (rf))
         ([result] (rf result))
         ([result input]
            (let [prior @pv]
              (vreset! pv input)
              (if (= prior input)
                result
                (rf result input))))))))
  ([coll] (sequence (dedupe) coll)))
Enter fullscreen mode Exit fullscreen mode

Most of this is boilerplate for a transducer, but notice the let block that declares the pv var as a volatile.

The 2-argument form of the transducer does the following:

  • Looks up the prior value, which is stored in the volatile.
  • Update the prior value to the current value.
  • If it equals the current value, then return the result unchanged.
  • Otherwise, the current value is different to the prior value, so add it to the result.

Other built-in transducers use volatiles to store state as well. take and drop use a volatile to count how many items they have iterated over. map-indexed uses a volatile to remember the current index value. distinct uses a volatile to remember everything that it has already returned so that it never returns the same value twice.

If you ever need to create a transducer that can remember state between elements, then be sure to reference the code in clojure.core to see how it was done there.

Wrap Up

This was a much more advanced look at immutability and mutability in Clojure.

We started by looking at how state can be remembered by accepting and returning state at each stage of processing. State can be stored in any kind of structure, and is typically a vector when the state is small, or a map when the complexity of the state increases. These state objects are often destructured by the code that processes them.

We then started looking at cases where mutability is useful, and some of the tools that Clojure provides for this. When data is globally accessible, or can be accessed in multiple threads, then mutable data will usually be stored in an Atom. But when the scope of this data is constrained, then a Volatile can be used instead. Volatiles work just like Atoms, but are not thread safe.

Afterword

This is much more complicated than my original introduction to immutability. I felt that it was necessary to describe the more complex cases that inevitably arise, and also the flexibility that Clojure offers when mutability really is the best tool for the job.

Again, I would appreciate any questions or complaints about this, to help improve the explanation.

Top comments (0)