DEV Community

Cover image for Create a React Project, Push It to GitHub, and Deploy With Netlify, From the Command Line
Michael J. Larocca
Michael J. Larocca

Posted on • Originally published at selftaughttxg.com

Create a React Project, Push It to GitHub, and Deploy With Netlify, From the Command Line

#react #github #netlify #vite

This article covers creating a React project, pushing it to GitHub, and deploying it with Netlify from the command line, which is excellent for getting your projects up and running quickly and easily!

TN-TXG-80

Introduction

In the last article, we covered how to create a local React environment with Vite to provide a practical approach to practicing React. In this article, I take it a step further by showing you how to create a GitHub repo, push it to GitHub, and deploy it with Netlify, all from the command line.

Step by step in instructions for installing the Netlify CLI and the GitHub CLI is provided in this article. The GitHub CLI is an excellent method for getting your React projects up and running quickly and easily!

Here is a checklist of what is needed:

Checklist

This command line checklist will reveal what you need to install; If the item is installed, a corresponding version number displays.

Command line install checks: 

node -v
npm -v
winget -v
ntl -v
Enter fullscreen mode Exit fullscreen mode

TIP: To copy code in the bash terminal, first select the code with the mouse by holding down left-click. Then, CTRL+SHIFT+C. to copy, and CTRL+SHIFT+V to paste.

Here is a list of the steps we will take:

Steps

  1. Open the VS Code Bash terminal
  2. Create a folder
  3. Create a Vite project
  4. Install the GitHub CLI
  5. Initiate a GitHub repo with the GitHub CLI
  6. Install the Netlify CLI
  7. Deploy with Netlify

Note: After creating a Vite project, you can skip to the "Create a GitHub repo from the command line" sections if you already have the GitHub CLI installed.

Bash terminal

We will be using the Bash terminal in VS Code. First, open up a new window in VS Code ( you can right-click the VS Code icon and choose new window ).

Next, click on view in the VS Code top menu and choose terminal ( shortcut: CTRL+~).

If Bash is not your default, select the **down icon* located on the right side ( launch profile ), and choose Git Bash.*

Bash

Bash terminal commands we will use:

  • ls - list files and directories
  • cd - change directory
  • mkdir - create a new directory

Create a folder

First, use the list files and directories command (ls) to see what's in your current directory.

Next, use the change directory command (cd) to navigate to a directory of your choosing to create a new folder.

The cd command is used to change directories in the terminal. Here's a brief tutorial on how to use it:

Using "cd" to change directories:

  1. Open your terminal.
  2. Type cd followed by the directory path you want to navigate to. For example, if you want to navigate to a directory called "Documents" that's located in your home directory, you would type cd ~/Documents and press Enter.
  3. To navigate up one directory, use cd .. For example, if you're currently in the "Documents" directory and you want to navigate up to your home directory, you would type cd .. and press Enter.
  4. To navigate to your home directory, simply type cd and press Enter.
  5. To navigate to the root directory, type cd / and press Enter.

That's it! With these simple commands, you can easily navigate around your file system using the terminal.

Once you are in a suitable directory of your choosing, create a new folder and name it using the make directory command (mkdir).

mkdir yourfoldername
Enter fullscreen mode Exit fullscreen mode

After creating your new folder, use the change directory command (cd) to enter it.

cd yourfoldername
Enter fullscreen mode Exit fullscreen mode

TIP: To clear the bash terminal, use CTRL+L. To cycle through your past commands/entries, use the UP ARROW and the DOWN ARROW.

Create a Vite project

We will use Vite to create a React project.

What is Vite? Vite is a tool that helps you build JavaScript applications for the web quickly and efficiently. It works well with modern web development frameworks and offers features that simplify development, like hot module replacement and optimized production builds. If you are starting out with web development, Vite is a great tool to help you get started!

To create a new Vite project, type in the following:

npm create vite@latest
Enter fullscreen mode Exit fullscreen mode

You may see the following message. Choose "y" to proceed.

Need to install the following packages:
  create-vite@4.2.0
Ok to proceed? (y)
Enter fullscreen mode Exit fullscreen mode

You will now be asked to name the project ( the default is vite-project ).

? Project name: » vite-project
Enter fullscreen mode Exit fullscreen mode

Next, using the arrow keys, select React for the framework.

? Select a framework: » - Use arrow-keys. Return to submit.
React
Enter fullscreen mode Exit fullscreen mode

Then, using the arrow keys, select JavaScript.

? Select a variant: » - Use arrow-keys. Return to submit.
JavaScript
Enter fullscreen mode Exit fullscreen mode

That's it! You should see a Scaffolding project in your chosen directory with your chosen name ( I chose solo-project-pro-digital-business-card ).

Scaffolding project in C:\Users\larocca\Desktop\github\solo-project-pro-digital-business-card\solo-project-pro-digital-business-card...

Done. Now run:

  cd solo-project-pro-digital-business-card
  npm install
  npm run dev
Enter fullscreen mode Exit fullscreen mode
  1. Next, following the instructions, we will change to the projects directory ( your projects name ) 
cd solo-project-pro-digital-business-card
Enter fullscreen mode Exit fullscreen mode
  1. Type npm install. 
npm install
Enter fullscreen mode Exit fullscreen mode
  1. Type npm run dev 
npm run dev
Enter fullscreen mode Exit fullscreen mode

If successful, your Vite project is now ready, and it can be viewed by hovering over the URL and CRTL+LEFT CLICK.

  VITE v4.2.0  ready in 509 ms

  ➜  Local:   http://127.0.0.1:5173/
  ➜  Network: use --host to expose
  ➜  press h to show help
Enter fullscreen mode Exit fullscreen mode

After viewing your site, we must run a build command before proceeding.

A shortcuts menu will appear by pressing "h" in the bash terminal.

Shortcuts
  press r to restart the server
  press u to show server url   
  press o to open in browser   
  press c to clear console     
  press q to quit
Enter fullscreen mode Exit fullscreen mode

Now, press "q" to quit so we can proceed with running the build command ( your preview site will stop running ).

Let's look at what is currently in your project folder using the (ls) list command.

$ ls
index.html  node_modules/  package.json  package-lock.json  public/  src/  vite.config.js
Enter fullscreen mode Exit fullscreen mode

Now, we will run the build command.

$ npm run build
Enter fullscreen mode Exit fullscreen mode

Let's look again and see what is now in your project folder using the (ls) list command.

$ ls
dist/       node_modules/  package-lock.json  src/                                            test-create-from-terminal-02        
index.html  package.json   public/            vite.config.js
Enter fullscreen mode Exit fullscreen mode

As you see, we now have a dist folder. In React, the "dist" folder is created when you run the build command. This folder contains the optimized and minified production code that is ready to be deployed to the web.

Remember to run the build command before each deployment! If you forget to run the build command after making changes to your project, the deployed version of the site will not show the updates!

If you would like step-by-step instructions to remove the default boilerplate, create simple React components, and add basic CSS styling, check out my article: How to Create a Local React Environment with Vite

Tip: When typing in the bash terminal, use the Tab key to auto complete.

GitHub CLI

The GitHub CLI tool allows you to interact with your GitHub repositories directly from your command line interface. This means you can create a new repository, add collaborators, and open pull requests without leaving your terminal.

The GitHub CLI helps streamline your workflow by allowing you to perform these tasks quickly and easily from one central location.

Note: If you already installed the GitHub CLI, skip to the "Create a GitHub repo from the command" line section.

To install the GitHub CLI on Windows, in the bash terminal, run the following command ( you will be asked to agree to their terms ):

$ winget install --id GitHub.cli
Enter fullscreen mode Exit fullscreen mode

After installing, you must close and restart your terminal/VS Code.

Note: The Windows installer modifes your PATH. When using Windows Terminal, you will need to open a new window for the changes to take affect. (Simply opening a new tab will not be sufficient.)

Getting started with GitHub CLI

To get started with GitHub CLI, you will need to run the following command:

$ gh auth login
Enter fullscreen mode Exit fullscreen mode

Then choose:

  • GitHub.com
  • HTTPS
  • Yes (Authenticate Git with your GitHub credentials)
  • Login with a web browser
  • Then, copy your one-time code, and press "Enter"

A new window will open. Paste in your one-time code, continue, and click "Authorize github."

If successful, you will be prompted with "Congratulations, you're all set! Your device is now connected."

Congrats

Create a GitHub repo from the command line

First, we need to initiate your project as a GitHub repository.

$ git init
Enter fullscreen mode Exit fullscreen mode

Next, to create a GitHub repo from the command line, run the following command:

$ gh repo create
Enter fullscreen mode Exit fullscreen mode

When prompted, choose:

Push an existing local repository to GitHub
Enter fullscreen mode Exit fullscreen mode

Choose the default path (.) by pressing enter:

? Path to local repository (.)
Enter fullscreen mode Exit fullscreen mode

Then the repository name :

? Repository name
Enter fullscreen mode Exit fullscreen mode

You can add a description:

?  Description
Enter fullscreen mode Exit fullscreen mode

Then, choose "Public" when prompted for visibility:

> Public
Enter fullscreen mode Exit fullscreen mode

Finally, choose yes to add a remote:

? Add a remote (Y/n)
Enter fullscreen mode Exit fullscreen mode

Leave the default as origin.

Below is a screenshot of the entire process:

gh-repo-create

Commit

Now it's time to commit our changes and push our repo up to GitHub.

We can add all of our changes with one command as follows:

$ git add .
Enter fullscreen mode Exit fullscreen mode

warning: in the working copy of 'vite-project/.gitignore', LF will be replaced by CRLF the next time Git touches it

Note: If you see a similar warning, it will not negatively affect your project. The issue concerns how Git handles line feeds (LF) and carriage returns (CR). Unix systems use (LF) and Windows uses (CR), thus (CRLF).

Next, we will commit with the following command:

$ git commit -m "Initial"
Enter fullscreen mode Exit fullscreen mode

Finally, we will push the repo to GitHub with the following command:

$ git push --set-upstream origin master
Enter fullscreen mode Exit fullscreen mode

Congrats! You will now see your repo on GitHub in your repository folder.

Netlify

How to install the Netlify CLI

To install the Netlify CLI, run the following command:

$ npm install -g netlify-cli
Enter fullscreen mode Exit fullscreen mode

Once the Netlify CLI is installed, run the following command:

$ ntl init
Enter fullscreen mode Exit fullscreen mode

When prompted, choose to create & create a new site:

> Create & configure a new site
Enter fullscreen mode Exit fullscreen mode

You will now be asked to choose a Netlify team ( you might only have one ):

$ Team: (Use arrow keys)
Enter fullscreen mode Exit fullscreen mode

Next, you as asked to create a site name ( you can leave it blank and choose a name later):

$ Site name:
Enter fullscreen mode Exit fullscreen mode

Then you may be asked to configure Webhooks and Deploy Keys. Choose the default:

> Authorize with GitHub through app.netlify.com
Enter fullscreen mode Exit fullscreen mode

You will now be redirected to the Netlify website to continue. You will be asked to sign in to Netlify CLI by choosing a Git provider. Choose GitHub.

Connect-Git-Provider

Finally, click the Authorize netlify button.

You will now be asked to log in with your GitHub password. Once successful, you will see the notification in the screenshot below:

LoggedIn Netlify CL

Next, you will be asked for your build command. Use vite build:

vite build
Enter fullscreen mode Exit fullscreen mode

Then, choose to deploy from the dist directory:

dist
Enter fullscreen mode Exit fullscreen mode

If you are prompted with "no netlify.toml detected," choose "Y" to proceed with creating the build:

? No netlify.toml detected. Would you like to create one with these build settings? (Y/n)
Enter fullscreen mode Exit fullscreen mode

Congratulations! The Netlify CI/CD is configured.

Netlify init process

Commit all of the changes

Now it is time to commit all of the changes:

$ git add .
Enter fullscreen mode Exit fullscreen mode

Then commit:

$ git commit -m "Added Netlify deploy files"
Enter fullscreen mode Exit fullscreen mode

Finally, we push to repo up to GitHub:

$ git push origin master
Enter fullscreen mode Exit fullscreen mode

Then, after committing all of the changes, run the netlify open site command.

To view the site, type in the following command:

$ netlify open:site
Enter fullscreen mode Exit fullscreen mode

Hover over the provided URL and "CTRL+LEFT-CLICK" to open the external website ( if prompted, click open ).

Congrats! Your site is now live!

Vite-React-netlify-app

Conclusion

Using the command line to create a React project, push it to GitHub, and deploy it with Netlify may seem daunting initially, but it's a straightforward process that can save you time and effort in the long run.

The GitHub CLI and Netlify CLI make it easy to manage your repositories and deployments directly from the command line.

Don't be intimidated by the technical jargon! With the step-by-step instructions provided in this article, you can get your projects up and running quickly and easily.
So don't be afraid to try it and see how it can improve your React development workflow!

Let's connect! I'm active on LinkedIn and Twitter.

Are you now confident using the command line to initialize your React projects? Do you have a different method that works better for you? Please share the article and comment!

Top comments (0)

Read next

madza profile image

12 Open Source Projects You Will Be Amazed to Discover 🔥🧑‍💻

Madza -

brunodevphp profile image

#01 - How to learn Git from scratch

Bruno Felipe Silva -

riyon_sebastian profile image

Building a Robust Frontend Error-Handling System with Axios and Custom Hooks

Riyon Sebastian -

9haroon profile image

Best 4 Methods to Build a PDF Viewer in React.js: PDF.js, react-pdf, and More (2024 Guide) 🚀

Kittisak Ma -