DEV Community

Megan Sullivan
Megan Sullivan

Posted on • Originally published at meganesulli.com

Switching between zsh Themes with a Shell Command

Introduction

When you're recording a screencast for your latest piece of educational content, it's a good idea to simplify your dev setup. Removing distracting tooling customizations reduces cognitive load, so that learners can focus on the key ideas you want them to understand.

But as a developer, you probably also have your own preferences for tooling when you're working on your own programming projects outside of teaching.

There's a great post by Joe Previte on How to Create Code Profiles in VSCode, which shows you how to create a shell command that switches between two different sets of VS Code settings.

In this post, we'll expand that shell command to also switch between command prompt themes, to keep your terminal simple and distraction-free.

Prerequisites

This post assumes that:

  • You're using zsh.
    • Not sure which shell you're using? On a Mac, open the Terminal app, and run echo $SHELL. It should output /bin/zsh.
    • Note: If you're using bash, you can still use the same principles from this post. But anywhere it says zshrc, you'll use bashrc instead.
  • You have Oh My Zsh installed. This is what we'll use for customizing zsh themes.
  • You've set up VS Code to allow launching from the command line.
  • You've followed Joe's post on How to Create Code Profiles in VSCode.
    • TL;DR: Create a new file at ~/code_profiles/teaching/data/User/settings.json. Paste your VS Code settings for screencasts in there.

Not sure what settings to use for screencasts?

Here are the settings we use at Apollo for recording screencasts for the Odyssey learning platform.

{  
  "zenMode.hideLineNumbers": false,  
  "workbench.colorTheme": "Apollo Midnight",  
  "editor.quickSuggestions": {  
    "other": false,  
    "comments": false,  
    "strings": false  
  },  
  "editor.wordBasedSuggestions": false,  
  "editor.suggestOnTriggerCharacters": false,  
  "workbench.statusBar.visible": false,  
  "editor.renderLineHighlight": "none",  
  "javascript.updateImportsOnFileMove.enabled": "always",  
  "editor.minimap.enabled": false,  
  "git.enableSmartCommit": false,  
  "window.zoomLevel": 3,  
  "zenMode.centerLayout": false,  
  "zenMode.fullScreen": false,  
  "editor.suggest.snippetsPreventQuickSuggestions": false,  
  "html.suggest.html5": false,  
  "editor.parameterHints.enabled": false,  
  "workbench.tips.enabled": false,  
  "editor.lightbulb.enabled": false,  
  "editor.hover.sticky": false,  
  "npm.fetchOnlinePackageInfo": false,  
  "editor.hover.enabled": false,  
  "editor.formatOnSave": true,  
  "editor.fontSize": 19,  
  "git.enabled": false, // prevents color-coding file names in the Explorer sidebar based on Git status
  "prettier.printWidth": 80,  
  "editor.glyphMargin": false,  
  "editor.cursorBlinking": "solid",  
  "editor.defaultFormatter": "esbenp.prettier-vscode",  
  "[javascript]": {  
    "editor.defaultFormatter": "esbenp.prettier-vscode"  
  },  
  "prettier.enable": true,  
  "eslint.format.enable": false,  
  "workbench.fontAliasing": "default",  
  "workbench.activityBar.visible": false  
}
Enter fullscreen mode Exit fullscreen mode

What you will build

Joe's post sets up a teach alias, which you can run from the command line. This command opens a folder in a new VS Code window, with your screencasting settings loaded.

In this post, we'll expand the teach command to understand a few different options. Here's the API we'll build:

  • teach screencast <folder>

    1. Opens the specified folder in VS Code using your screencasting settings.
    2. Switches shell preference to your screencasting zsh theme.
  • teach reset

    1. Sets shell preference back to your personal zsh theme.
    2. The next time you run code <file> from the command line, it will load VS code with your original personal settings.

The architecture

To build the teach command, we'll be configuring our ~/.zshrc file. The ~/.zshrc file gets run automatically whenever a new terminal window is open. (The "rc" stands for "run commands".)

Here's a high-level overview of the architecture we'll build to load the correct shell theme:

An architecture diagram showing how the files for our teach command are connected. Detailed explanation below.

  1. Whenever a new terminal window is opened, the ~/.zshrc file runs.
  2. We'll set up our ~/.zshrc file to source another file called ~/zshrc/teach.sh.
  3. The ~/zshrc/teach.sh script will check the contents of a text file called ~/zshrc/CURRENT_PROMPT_THEME.
  4. Use the contents of CURRENT_PROMPT_THEME to load the correct zsh theme.
    • If the file's contents are the string "screencast", then ~/zshrc/teach.sh will source the zsh theme from the ~/zshrc/screencast-zsh-theme.sh file.
    • Otherwise, if the file's contents are the string "personal", then ~/zshrc/teach.sh will source the zsh theme from ~/zshrc/personal-zsh-theme.sh.

Note: You could (in the way that all things are possible) just put all this logic directly into your ~/.zshrc file. But we're going to break it up into multiple files, to keep things modular and tidy.

Instructions

Let's get to it!

  • 1) Create a new file called ~/zshrc/personal-zsh-theme.sh. You can do this from the command line by running the following:
mkdir ~/zshrc
touch ~/zshrc/personal-zsh-theme.sh
Enter fullscreen mode Exit fullscreen mode
  • 2) Move your existing personal zsh theme settings out of ~/.zshrc and into the ~/zshrc/personal-prompt.sh file. Here's what mine looks like:
# Path to your oh-my-zsh installation.
export ZSH="/Users/megansullivan/.oh-my-zsh"

# Set name of the theme to load --- if set to "random", it will
# load a random theme each time oh-my-zsh is loaded, in which case,
# to know which specific one was loaded, run: echo $RANDOM_THEME
# See https://github.com/ohmyzsh/ohmyzsh/wiki/Themes
ZSH_THEME="robbyrussell"

# Which plugins would you like to load?
# Standard plugins can be found in $ZSH/plugins/
# Custom plugins may be added to $ZSH_CUSTOM/plugins/
# Example format: plugins=(rails git textmate ruby lighthouse)
# Add wisely, as too many plugins slow down shell startup.
plugins=(git)

source $ZSH/oh-my-zsh.sh
Enter fullscreen mode Exit fullscreen mode
  • 3) Create a new file, ~/zshrc/screencast-zsh-theme.sh. You can do this from the command line by running the following command:
touch ~/zshrc/screencast-zsh-theme.sh
Enter fullscreen mode Exit fullscreen mode
  • 4) Put your zsh theme settings for screencasting in the new ~/zshrc/screencast-zsh-theme.sh file. At Apollo we use the powerlevel10k theme for screencasts, so here's what my teach theme looks like:
# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
# Initialization code that may require console input (password prompts, [y/n]
# confirmations, etc.) must go above this block; everything else may go below.
if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
fi

# Path to your oh-my-zsh installation.
export ZSH="/Users/megansullivan/.oh-my-zsh"

# Set name of the theme to load --- if set to "random", it will
# load a random theme each time oh-my-zsh is loaded, in which case,
# to know which specific one was loaded, run: echo $RANDOM_THEME
# See https://github.com/ohmyzsh/ohmyzsh/wiki/Themes
ZSH_THEME="powerlevel10k/powerlevel10k"

# Which plugins would you like to load?
# Standard plugins can be found in $ZSH/plugins/
# Custom plugins may be added to $ZSH_CUSTOM/plugins/
# Example format: plugins=(rails git textmate ruby lighthouse)
# Add wisely, as too many plugins slow down shell startup.
plugins=(git)

source $ZSH/oh-my-zsh.sh

# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
Enter fullscreen mode Exit fullscreen mode

Note: Using powerlevel10k requires some extra installation steps, which you'll need to do first. For more details, refer to the powerlevel10k installation instructions for Oh My Zsh.

  • 5) Set the initial value of the ~/zshrc/CURRENT_PROMPT_THEME file to "personal" by running the following from the command line:
echo "personal" > ~/zshrc/CURRENT_PROMPT_THEME
Enter fullscreen mode Exit fullscreen mode
  • 6) Create a new file, ~/zshrc/teach.sh. You can do this from the command line by running the following:
touch ~/zshrc/teach.sh
Enter fullscreen mode Exit fullscreen mode
  • 7) Add the following to ~/zshrc/teach.sh:
# read the CURRENT_PROMPT_THEME file, and load the corresponding shell theme
cat ~/zshrc/CURRENT_PROMPT_THEME | while read line; do
  if [[ $line = "personal" ]]
  then
    source ~/zshrc/personal-zsh-theme.sh;
  elif [[ $line = "screencast" ]]
  then
    source ~/zshrc/screencast-zsh-theme.sh;
  fi
done

# defines a "teach" command that can be run from the command line
teach() {
  # usage: teach reset
  # - sets shell preference back to personal theme
  if [[ $1 = "reset" ]]
  then 
    source ~/zshrc/personal-zsh-theme.sh;
    echo "personal" > ~/zshrc/CURRENT_PROMPT_THEME;

  # usage: teach screencast <folder>
  # - switches shell preference to screencast theme
  # - opens the specified folder in VS Code using screencast settings
  elif [[ $1 = "screencast" ]]
  then
    source ~/zshrc/screencast-zsh-theme.sh;
    echo "screencast" > ~/zshrc/CURRENT_PROMPT_THEME
    code --user-data-dir ~/code_profiles/teaching/data $2;

  # default message
  else
    echo "  Command not recognized. Options:";
    echo "  - teach reset: restore personal preferences for command prompt";
    echo "  - teach screencast <folder>: switch command prompt and open with VS code settings for screencasting";
  fi
}
Enter fullscreen mode Exit fullscreen mode
  • 8) Add the following line somewhere in your ~/.zshrc file (the exact position doesn't matter):
source ~/zshrc/teach.sh
Enter fullscreen mode Exit fullscreen mode
  • 9) Manually reload your ~/.zshrc file by running the following from the command line:
source ~/.zshrc
Enter fullscreen mode Exit fullscreen mode

Now you should be able to use the teach command! Let's test it out in the next section.

Testing it out

Time to see our shell script in action! Let's test out the teach command and make sure it behaves correctly.

Switching to screencasting settings

First, let's check that our screencasting settings load correctly. Run the following from the command line:

teach screencast ~
Enter fullscreen mode Exit fullscreen mode

This should open your home directory in a new VS Code window, using your screencast VS Code settings.

Open the VS Code integrated terminal. It should be using your screencasting zsh theme.

Switching to personal settings

Now, let's check that we can reset to our personal settings correctly. Run the following from the command line:

teach reset
Enter fullscreen mode Exit fullscreen mode

Now when you open a new shell window (in Terminal or in VS Code), it should be using your personal zsh theme.

🚨 Known issue: On my machine, after running teach reset, the shell theme in my existing terminal window doesn't update. But if I open a new window/tab, it will load the correct zsh theme.

This happens because the p10k theme I use for my teaching zsh theme sets a bunch of environment variables that don't get unset in the current shell when teach reset gets run. So some combination of those p10k environment variables gets in the way of zsh using my personal theme. Opening a new shell window works because then the ~/.zshrc file starts fresh and only loads the environment variables for my personal theme.

This isn't a huge deal for me, since I won't be switching themes in the middle of a screencast, and it's a minor chore to open up a new terminal window. But if you can think of an easy way to fix it, let me know!

Wrap it up

You did it! Now you can use the teach command to switch between shell themes.

I hope this post was helpful. If you enjoyed it, reach out on Twitter or leave a tip via Ko-fi. I can't wait to see the cool things you create!

Top comments (0)