Parts of a Grinder are as follows.

• Base.
• Table.
• Segment.
• Grating Wheel.
• Wheel Guard.
• Grating Wheel Head.
• Three Types of Traversing Wheels.
• Coolant Supply Nozzle.

1. Base-

The base is under most of the grinding machine. It is typically made of solid metal. This guides the remainder of the grinding machine.

2.Table-

The table is loose at the base. This is the place where the workpiece is set and appropriately positioned for grinding. It can move evenly left and right utilizing a crossing wheel known as a hand navigating wheel.

3.Column-

It is an upward segment where the grating wheel, wheel head, and wheel watch are put.

4. Rough Wheel-

It is the primary wheel that turns and eliminates the material from the outer layer of the workpiece and makes it smooth. This wheel is covered with scraped spot and permits the material to be taken out effectively from the outer layer of the workpiece.

5. Wheel Guard-

It is a front of a grating wheel or grinding wheel which ensures the specialist in a mishap—grinding machine parts and capacities.

6. Grating Wheel Head-

It is a compartment that is gone up or down utilizing a crossing wheel called an upward feed handwheel. We push this wheel head forward so the grinding wheel contacts the workpiece.

7. Three Types of Traversing Wheels-

Hand navigating wheel: – This crossings wheel is utilized to move the table, and it is left evenly to oblige the workpiece with the grinding wheel.
Cross-side handwheel: – This navigating wheel is utilized to move the work table in the forward and reverse way to connect between the workpiece and the grinding wheel.
Vertical feed handwheel: – This navigating wheel is utilized to move the wheel head in vertical all over bearing. These three wheels are utilized to change the places of the workpiece and the grinding wheel so these two connect with one another.

8. Coolant Supply Nozzle-

The coolant supply spout is utilized to embed the spout into the grinding machine, which cools the workspace so that hotness isn't disintegrated into the workpiece and the grating wheel.