DEV Community

Mario García
Mario García

Posted on • Updated on

Using Docker as provider for Vagrant

According to the documentation, Vagrant has support for VirtualBox, VMWare, Hyper-V and Docker as providers.

Through this blog post you will learn how to configure Docker and Vagrant.

Docker

For installing Docker on Linux follow the instructions in the documentation. Go directly to the instructions of your distribution from the following list:

If you use Arch Linux or any Arch-based distribution, install it using pacman and initialize the daemon:

$ sudo pacman -S docker
$ sudo systemctl start docker
Enter fullscreen mode Exit fullscreen mode

For running Docker commands you will need root permissions. As Vagrant will run it on your behalf, you have to configure it for running without sudo. You can follow the instructions in the Post-installation steps for Linux section as described below.

First create the docker group:

$ sudo groupadd docker
Enter fullscreen mode Exit fullscreen mode

Add your user to the docker group:

$ sudo usermod -aG docker $USER
Enter fullscreen mode Exit fullscreen mode

You will have to log out and log back in for the changes to take effect.

If you want to activate the changes to groups in your current session, run:

$ newgrp docker
Enter fullscreen mode Exit fullscreen mode

To check if you can run docker commands without sudo:

$ docker run hello-world
Enter fullscreen mode Exit fullscreen mode

This command will download the test container hello-world and run it.

Vagrant

For installing Vagrant go to the download page and get the right package for your distribution. You can also install it from the repositories of some Linux distributions.

Debian-based:

$ sudo apt install vagrant
Enter fullscreen mode Exit fullscreen mode

Fedora:

$ sudo dnf install vagrant
Enter fullscreen mode Exit fullscreen mode

CentOS

$ sudo dnf install -y https://releases.hashicorp.com/vagrant/2.2.9/vagrant_2.2.9_x86_64.rpm
Enter fullscreen mode Exit fullscreen mode

Arch Linux:

$ sudo pacman -S vagrant
Enter fullscreen mode Exit fullscreen mode

Vagrant + Docker

There are two ways you can use Docker as provider. Using an image from the Docker registry:

Vagrant.configure("2") do |config|
  config.vm.provider "docker" do |d|
    d.image = "foo/bar"
  end
end
Enter fullscreen mode Exit fullscreen mode

Or a Dockerfile:

Vagrant.configure("2") do |config|
  config.vm.provider "docker" do |d|
    d.build_dir = "."
  end
end
Enter fullscreen mode Exit fullscreen mode

Using a Dockerfile

First you have to create a directory to store the configuration files for your environment and change to this directory.

$ mkdir docker-test
$ cd docker-test
Enter fullscreen mode Exit fullscreen mode

Create a Dockerfile:

$ touch Dockerfile
Enter fullscreen mode Exit fullscreen mode

And add the following content:

FROM ubuntu

ENV TZ=America/Mexico_City
RUN ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone

RUN apt-get update -y

RUN apt-get install -y --no-install-recommends ssh sudo

RUN useradd --create-home -s /bin/bash vagrant
RUN echo -n 'vagrant:vagrant' | chpasswd
RUN echo 'vagrant ALL = NOPASSWD: ALL' > /etc/sudoers.d/vagrant
RUN chmod 440 /etc/sudoers.d/vagrant
RUN mkdir -p /home/vagrant/.ssh
RUN chmod 700 /home/vagrant/.ssh
RUN echo "ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA6NF8iallvQVp22WDkTkyrtvp9eWW6A8YVr+kz4TjGYe7gHzIw+niNltGEFHzD8+v1I2YJ6oXevct1YeS0o9HZyN1Q9qgCgzUFtdOKLv6IedplqoPkcmF0aYet2PkEDo3MlTBckFXPITAMzF8dJSIFo9D8HfdOV0IAdx4O7PtixWKn5y2hMNG0zQPyUecp4pzC6kivAIhyfHilFR61RGL+GPXQ2MWZWFYbAGjyiYJnAmCP3NOTd0jMZEnDkbUvxhMmBYSdETk1rRgm+R4LOzFUGaHqHDLKLX+FIPKcF96hrucXzcWyLbIbEgE98OHlnVYCzRdK8jlqm8tehUc9c9WhQ==" > /home/vagrant/.ssh/authorized_keys
RUN chmod 600 /home/vagrant/.ssh/authorized_keys
RUN chown -R vagrant:vagrant /home/vagrant/.ssh
RUN sed -i -e 's/Defaults.*requiretty/#&/' /etc/sudoers
RUN sed -i -e 's/\(UsePAM \)yes/\1 no/' /etc/ssh/sshd_config

RUN mkdir /var/run/sshd

RUN apt-get -y install openssh-client

EXPOSE 22
CMD ["/usr/sbin/sshd", "-D"]
Enter fullscreen mode Exit fullscreen mode

The official Docker image of Ubuntu will be used as specified in FROM ubuntu.

When running apt-get update -y or apt update -y, it will ask you to configure the timezone, the prompt will wait for you to enter the selected option.

To avoid this, you have to add the configuration options in the Dockerfile, as described here, by adding the following lines:

ENV TZ=America/Mexico_City
RUN ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone
Enter fullscreen mode Exit fullscreen mode

Replacing the value of TZ according to your timezone.

Vagrant requires an SSH connection to access the container and Docker images come only with the root user. You have to configure another user with root permissions. That's why the ssh and sudo packages are required.

In the following lines the vagrant user is created and a password assigned. The user wouldn't be required to use a password when running any command that requires root permissions. The user is also added to the sudo group.

RUN useradd --create-home -s /bin/bash vagrant
RUN echo -n 'vagrant:vagrant' | chpasswd
RUN echo 'vagrant ALL = NOPASSWD: ALL' > /etc/sudoers.d/vagrant
Enter fullscreen mode Exit fullscreen mode

.ssh directory must be created. This is the directory when configuration files related with SSH connection are stored.

RUN mkdir -p /home/vagrant/.ssh
RUN chmod 700 /home/vagrant/.ssh
Enter fullscreen mode Exit fullscreen mode

An insecure key is added for the initial configuration. This key will be replaced later when you initialize your virtual environment the first time. Also, the ownership of the .ssh directory is changed to vagrant user.

RUN echo "ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA6NF8iallvQVp22WDkTkyrtvp9eWW6A8YVr+kz4TjGYe7gHzIw+niNltGEFHzD8+v1I2YJ6oXevct1YeS0o9HZyN1Q9qgCgzUFtdOKLv6IedplqoPkcmF0aYet2PkEDo3MlTBckFXPITAMzF8dJSIFo9D8HfdOV0IAdx4O7PtixWKn5y2hMNG0zQPyUecp4pzC6kivAIhyfHilFR61RGL+GPXQ2MWZWFYbAGjyiYJnAmCP3NOTd0jMZEnDkbUvxhMmBYSdETk1rRgm+R4LOzFUGaHqHDLKLX+FIPKcF96hrucXzcWyLbIbEgE98OHlnVYCzRdK8jlqm8tehUc9c9WhQ==" > /home/vagrant/.ssh/authorized_keys
RUN chmod 600 /home/vagrant/.ssh/authorized_keys
RUN chown -R vagrant:vagrant /home/vagrant/.ssh
Enter fullscreen mode Exit fullscreen mode

You can log in with the root user but the password wasn't assigned. You can change the password adding a similar line but changing vagrant:vagrant to root:THEPASSWORDYOUCHOOSE or after log in.

Vagrantfile

Now create a Vagrantfile:

$ touch Vagrantfile
Enter fullscreen mode Exit fullscreen mode

And add the following content:

Vagrant.configure("2") do |config|
  config.vm.provider :docker do |d|
     d.build_dir = "."
     d.remains_running = true
     d.has_ssh = true
  end
end
Enter fullscreen mode Exit fullscreen mode

Here you tell Vagrant to build the Docker image from the Dockerfile and the container can be accessed through SSH and must be always running.

d.build_dir = "."
d.remains_running = true
d.has_ssh = true
Enter fullscreen mode Exit fullscreen mode

For installing software you can use a shell script or any provisioning tool supported by Vagrant. You can also add the instructions for installing and configuring the tools you required in the Dockerfile.

If you want to use a bash script, just add the following line after config.vm.provider.

config.vm.provision :shell, path: "script.sh", privileged: false
Enter fullscreen mode Exit fullscreen mode

The privileged option is set to false as you will not require to run these commands with root permissions.

Up and running

When running vagrant up, Vagrant will build the Docker image based on the Dockerfile and run the container.

You can log in to the virtual environment running vagrant ssh.

If you want to stop the environment, run vagrant halt. For destroying the virtual environment run vagrant destroy.

Top comments (3)

Collapse
 
proxiblue profile image
Lucas van Staden

I created a vagrant docker communicator plugin, which allows interfacing with pulled docker images, that don't have SSH, as if they have SSH, via the Docker API

This allows one to use provisioning, and copy files to the docker instance, without needing to extend/create own docker version of that image.

search for vagrant-communicator-docker on rubygem

Collapse
 
arzola profile image
Oscar Arzola

Don't forget to add iproute2 to the Docker requirements vagrant uses /sbin/ip

Collapse
 
gwpl profile image
Grzegorz Wierzowiecki

Based on your tutorial I've made following Dockerfile and Vagrant file and vagrant up && vagrant ssh seemed to work! :D