DEV Community

Cover image for Understanding The New Control Flow And Deferred Loading in Angular
Luis Castro
Luis Castro

Posted on

Understanding The New Control Flow And Deferred Loading in Angular

Introduction

Angular is gearing up for its new release (version 17), and with it comes the introduction of two thrilling features: the revamped Control Flow syntax and the Deferred blocks syntax. In this article, we'll delve deep into both, shedding light on their functionalities and potential.

But before we dive into the new, let's take a step back and revisit the current control flow syntax.

📚 The Current Control Flow Syntax

A foundational element of the framework is its control flow. Currently, Angular orchestrates this through structural directives. These directives, often seen as the rockstars of the framework, have catered to developers' needs efficiently. They've provided solutions to a myriad of scenarios. However, they come with certain trade-offs, which the Angular team aims to address with the new syntax.

At present, we have three main structural directives:

  • ngIf: The *ngIf directive conditionally adds or removes content from the DOM, based on the expression's truthiness.
  • ngFor: The *ngFor directive instantiates a template for each item in an iterable.
  • ngSwitch: The *ngSwitch directive swaps the DOM structure in your template based on a specific expression's evaluation.

So, Why the Change?

  1. Developer Feedback: The prevailing microsyntax-based control flow, although effective, isn't as intuitive as some other frameworks.
  2. New Features: The anticipated changes not only aim to refine the developer experience but also usher in new functionalities.

  3. Adapting to Zoneless Applications: The traditional control flow techniques falter with zoneless apps. Rather than making minor adjustments to the existing system, the Angular team envisions a comprehensive overhaul, steering towards a sleeker, built-in control flow.

🎉 The New Control Flow Syntax

So, now let's get into the new stuff, for the new control flow syntax, we have the following:

  • @if: with the new syntax this will replace the ngIf directive.
@if (user.type === 'primary') {
<user-profile [data]="user" />
} @else if (user.type === 'secondary') {
<user-profile [data]="user" [type]="secondary" />
} @else {
<p>The profile doesn't exist!</p>
}
Enter fullscreen mode Exit fullscreen mode

Looking good, right? But wait, there's more! 🤩

  • @for: with the new syntax this will replace the ngFor directive, and has several differences compared to its structural directive predecessor.
@for (user of users; track user.id) {
<user-profile [data]="user" />
}
Enter fullscreen mode Exit fullscreen mode

You can also track the index of the current item:

@for (user of users; track $index) {
<user-profile [data]="user" />
}
Enter fullscreen mode Exit fullscreen mode

A couple of things to notice here (besides the syntax) we now have a track that is mandatory and replaces the use of the trackBy function. It determines the row key which @for will use to associate array items with the views it creates, moving them around as needed.

@empty block

As well Angular is introducing the @empty block, which is a block that will be displayed when the array is empty.

@for (something of []; track $index) {
<span class="square">{{ something }}!</span>
} @empty {
<span class="square"
  >This is empty so this will be shown!! if you use &#64;for with an &#64;empty
  block</span
>
}
Enter fullscreen mode Exit fullscreen mode

$index and other variables

Within for row views, there are several implicit variables which are always available:

Variable Meaning
$index Index of the current row
$first Whether the current row is the first row
$last Whether the current row is the last row
$even Whether the current row index is even
$odd Whether the current row index is odd

These variables are always available with these names, but can be aliased via a let segment:

@for (item of items; track item.id; let idx = $index, e = $even) {
<span>Item #{{ idx }}: {{ item.name }}</span>
}
Enter fullscreen mode Exit fullscreen mode

Track: The Angular team has found that not using trackBy in NgFor loops over immutable data often leads to performance issues. To fix this, trackBy is now mandatory for these loops. The only exception is when the loop iterates over Iterable>; in this case, trackBy is actually disallowed to optimize row updates.

Cool so far? Let's keep going! 🤓

  • @switch: with the new syntax this will replace the ngSwitch directive.
@switch (count) { @case (0) {
<span class="square">{{ options[count].label }}</span>
} @case (1) {
<span class="square_red">{{ options[count].label }}</span>
} @default{
<span class="square_green">{{ options[count].label }}</span>
} }
Enter fullscreen mode Exit fullscreen mode

Honestly i think changes looks great it detach the element from the control flow and make it more readable and easy to understand.

🎉 Deferred Blocks

Now let's talk about one of the rockstars of the upcoming version the @defer.

Modern web design prioritizes optimal user experience during application loading, with metrics like Core Web Vitals measuring this performance. To enhance this, developers often defer less essential UI elements to prioritize loading key components. For instance, a page might load a primary video before the comments section. While Angular offers lazy loading features, these methods can be intricate. Hence, Angular is proposing a unified deferred loading approach, @defer, compatible with both client and server-side rendering.

How does it work?

We use them in the template by the following block @defer(condition){...deferred stuff }. Once we do this Angular will make the magic happen and the dependencies (components, directives, etc) referenced within the deferred block are going to be loaded lazily. This includes all dependencies within the deferred block, which would include components, directives, and pipes used within those dependencies.

And i personally believe that's super cool!! 🤩

here's an example:

@defer (on interaction(deferButton)) {
<app-lazy />
}
Enter fullscreen mode Exit fullscreen mode

This little block will load the app-lazy component once the user interacts with the deferButton element.

But there's more! 🤓

The @defer block swaps placeholder content with lazily loaded content when activated. Developers can set this activation using two options: on and when.

when: An imperative condition that triggers the swap when it becomes true. Once swapped, it won't revert even if the condition becomes false.
on: A declarative trigger, like an event. Predefined triggers include actions like interaction or entering the viewport. Multiple triggers, such as interaction or a timer, can be combined.
This ensures efficient content loading based on user interaction or set conditions.

Examples of this are:

@defer (when cond) {
<some-cmp />
}
Enter fullscreen mode Exit fullscreen mode
@defer (on interaction, timer(5s)){
<some-cmp />
}
Enter fullscreen mode Exit fullscreen mode

We can also combine them:

<button #deferButton>
  Show Defered Component using &#64;defer on interaction
</button>

@defer (when cond; on interaction(deferButton)){
<some-cmp />
}
Enter fullscreen mode Exit fullscreen mode

Triggering Deferred Blocks

So, we know how to use the @defer block, but how do we trigger it? Well, we have some options:

Trigger Description
idle Triggers the deferred loading once the browser has reached an idle state.
interaction Triggers the deferred loading on click, focus, touch, and input events.
immediate Triggers the deferred load immediately, once the client has finished
rendering.
timer(x) Triggers after a specified duration.
hover Triggers deferred loading when the mouse has hovered over a trigger area.
viewport Triggers the deferred block when the specified content enters the viewport.

Let's put together a couple of examples:

viewport:

In this case the deferred block will be loaded once the greeting element enters the viewport.

<div #greeting>Hello!</div>

@defer (on viewport(greeting)){
<greetings-cmp />
}
Enter fullscreen mode Exit fullscreen mode

timer:

In this case the deferred block will be loaded after 5 seconds.

@defer (on timer(5s)){
<some-cmp />
}
Enter fullscreen mode Exit fullscreen mode

@placeholder Blocks

@defer blocks, by default, are empty until activated. However, with @placeholder blocks, developers can dictate what's displayed beforehand. This could be any content, from DOM nodes to components.

@defer (when cond){
<some-cmp />
} @placeholder (minimum 500ms){
<img src="placeholder.png" />
}
Enter fullscreen mode Exit fullscreen mode

@loading Blocks

The @loading block indicates the content to be shown while the @defer block is gathering its required dependencies to display its main content. If omitted, the @defer block will keep displaying the @placeholder content (if available) until its primary content is ready.

@defer (when cond){
<some-cmp />
} @loading {
<div class="loading">Loading the component...</div>
}
Enter fullscreen mode Exit fullscreen mode

@error Blocks

The @error block displays a UI for instances when deferred loading does not succeed. Like the @placeholder and @loading blocks, it's optional. Without it, the @defer block won't show anything upon a loading failure.

@defer (when cond){
<calendar-cmp />
} @error{
<p>Failed to load the component</p>
<p><strong>Error:</strong> {{$error.message}}</p>
}
Enter fullscreen mode Exit fullscreen mode

Note: The @loading , @placeholder , and @error blocks eagerly load their content. This means that they will be loaded as soon as the @defer block is rendered, regardless of whether the @defer block is activated or not.

Resource Prefetching

Another feature for deferred loading is the ability to prefetch dependencies ahead of a user's interaction. This is especially useful to reduce the delay when a deferred block becomes active. The prefetch syntax works alongside the main defer condition and uses triggers (when and/or on) similar to defer.

The distinction is that when and on control rendering while prefetch determines when to fetch resources. This allows you to prefetch resources even before a user sees or interacts with a deferred block, ensuring faster availability. Note: turning prefetch when to false won't hide content. To hide content, use it in conjunction with if.

@defer (when cond; prefetch when cond){
<some-cmp />
}
Enter fullscreen mode Exit fullscreen mode

Migration

What i love about Angular is that they're always trying to make the migration process as smooth as possible, and this time is no exception. The Angular team is working on an schematic to help us migrate our current code to the new syntax. This schematic should be available when the version is released.

As well as per the RFC's and comments from the Angular team the structural directives are not going anywhere, so we can keep using them as we do today.

🎈 Conclusion

The introduction of the new Control Flow syntax and Deferred blocks is a testament to Angular's commitment to providing state-of-the-art tools for developers. These changes not only simplify code readability but also enhance performance, especially for large-scale applications. By understanding these new additions, developers can harness the full potential of Angular's evolving ecosystem.

This are exciting times for Angular and i can't wait to see what's next! 🤩

If you want to know more about both RFC's you can check them out here:

As well you can see them in action with this StackBlitz example prepared by @Jean__Meche.

If you found this exploration insightful and wish to delve deeper into Angular's vast universe, don't hesitate to connect with me on Twitter, Threads, or LinkedIn. Let's embark on this journey of discovery and innovation together! 💻🚀📘

Feeling generous? Show some love and buy me a coffee. Your support is greatly cherished! ☕️

Top comments (0)