The story started with a Twitter Post about
the JDK method bitCount
which is available for Long
and Integer
types.
If you take a look into the time line, there was a reply https://twitter.com/ScottSelikoff/status/1254185742760280064 by @ScottSelikoff (funny comment of course) who stated 42
as the answer to life, the universe and everything to the magic method which has been followed by Lukas Eder:
For what percentage of longs would that be the correct result?
This thread has inspired me to this article.
So let us summarize that question:
For what percentage of long values is
bitCount()
== 42?
The first question which arises: What does bitCount
do? Let us take a look into the java doc of the
function (Integer variant):
Returns the number of onebits in the two's complement binary
representation of the specified int value. This function is sometimes
referred to as the population count.
So in the end bitCount
counts the number (as the name implies) of 1
s which are in a given value.
Here are some exemplary values for the type Integer
:

Integer i = 0b1100_0000_0000_0000_0000_0000_0000_0000
bitCount=2

Integer i = 0b0000_0000_0000_0000_0000_0000_0000_0011
bitCount=2

Integer i = 0b0000_0000_0000_0000_0000_0000_0000_1111
bitCount=4

Integer i = 0b1111_1111_1111_0000_0000_0000_0000_0000
bitCount=12

Integer i = 0b1010_1010_1010_1010_1010_1010_0000_0000
bitCount=12

Integer i = 0b1111_1111_1111_1111_1111_1111_1111_1111
bitCount=32
A very naive way of trying to solve that question would be to write code like this:
BigDecimal pow = BigDecimal.valueOf(2L).pow(64);
Map<Integer, Long> collect = LongStream.range(Long.MIN_VALUE, Long.MAX_VALUE)
.boxed()
.collect(groupingBy(Long::bitCount, counting()));
collect.forEach((k, v) > System.out.printf("k = %4s v=%15s %7.5f\n", k, v, BigDecimal.valueOf(v)
.divide(pow)
.multiply(BigDecimal.valueOf(100L))));
The first line will create 2^64
which is equal to 100% and the
BigDecimal.valueOf(v).divide(pow).multiply(BigDecimal.valueOf(100L))
will just calculate the percentage
of the value (number of values for appropriate bit count) of the resulting map which contains the number.
Ok now we can try that.... Really? Never. This code will run a very very long time...
A long time ago in a galaxy far, far away...
That might be a little long to wait for the result. Ok let's think a bit about the code. Ah! Yes of course I got it.
We should use parallel()
for the stream to get it faster.
BigDecimal pow = BigDecimal.valueOf(2L).pow(64);
Map<Integer, Long> collect = LongStream.range(Long.MIN_VALUE, Long.MAX_VALUE)
.boxed()
.parallel()
.collect(groupingBy(Long::bitCount, counting()));
collect.forEach((k, v) > System.out.printf("k = %4s v=%15s %7.5f\n", k, v, BigDecimal.valueOf(v)
.divide(pow)
.multiply(BigDecimal.valueOf(100L))));
That version will be faster than the previous one and will take... Sorry but I simply don't know cause I have not tested it ;).
Can we make a simpler and faster solution to get a result in the end? Ok we change the Long
into Integer
? Now the code looks like this. As you see I already added the parallel()
in the code to get faster also you see I'm using BigDecimal.valueOf(2L).pow(32)
(2^32) instead of 2^64
based on the usage of Integer
:
BigDecimal pow = BigDecimal.valueOf(2L).pow(32);
Map<Integer, Long> collect = IntStream.range(Integer.MIN_VALUE, Integer.MAX_VALUE)
.boxed()
.parallel()
.collect(groupingBy(Integer::bitCount, counting()));
collect.forEach((k, v) > System.out.printf("k = %4s v=%15s %7.3f\n", k, v, BigDecimal.valueOf(v)
.divide(pow)
.multiply(BigDecimal.valueOf(100L))));
So this code will run in ca. 15 seconds (Hexa Core CPU's) with the following result:
k = 0 v= 1 0.000
k = 1 v= 32 0.000
k = 2 v= 496 0.000
k = 3 v= 4960 0.000
k = 4 v= 35960 0.001
k = 5 v= 201376 0.005
k = 6 v= 906192 0.021
k = 7 v= 3365856 0.078
k = 8 v= 10518300 0.245
k = 9 v= 28048800 0.653
k = 10 v= 64512240 1.502
k = 11 v= 129024480 3.004
k = 12 v= 225792840 5.257
k = 13 v= 347373600 8.088
k = 14 v= 471435600 10.976
k = 15 v= 565722720 13.172
k = 16 v= 601080390 13.995
k = 17 v= 565722720 13.172
k = 18 v= 471435600 10.976
k = 19 v= 347373600 8.088
k = 20 v= 225792840 5.257
k = 21 v= 129024480 3.004
k = 22 v= 64512240 1.502
k = 23 v= 28048800 0.653
k = 24 v= 10518300 0.245
k = 25 v= 3365856 0.078
k = 26 v= 906192 0.021
k = 27 v= 201376 0.005
k = 28 v= 35960 0.001
k = 29 v= 4960 0.000
k = 30 v= 496 0.000
k = 31 v= 31 0.000
k = 32 v= 1 0.000
The first column k=
is the bitCount
so the first line means:
We have a single value v=1
where the bitCount==0
and 0.000
percent.
Let use take a value on the line for k=16
and v=601,080,390
and 13,995
percent of the values of Integer. So it means for bitCount=16
we have 601,080,390
values which are 13,995
percent of all integer values.
One interesting observation which can be made here is that the number of values is rising up to a maximum value
at k=16
(bitCount=16
) which you might not have expected. Another thing is that the number of values is going
down to the higher number with bitCount=32
etc.
Based on the runtime of this example you could roughly estimate the runtime for the variant with Long:
15 s * 2^32 = 64.424.509.440 seconds / 86400 seconds / day = 745.654 days / 365 days / year
which results in ca. 2,000 years. So having a machine which has 1000 times more CPUs it could be dropped down to about 2 years (theoretically) or maybe you could use more power by using GPU's on AWS cloud but in the end no realizable solution.
So we need to reconsider if there is a faster or easier solution to answer the question? Yes there is one.
The answer can be found by using some mathematics.
Let us take a known example from the above result output:
We have 32 bits (Integer). Now we have 16 bits which should be 0
and 16 bits which should be 1
. By expressing that
like this:
You can calculate that via WolframAlpha and the result
is: 601080390
which is exact the number in the above example. Let us check some other values:
The resulting value will be two times in the table one for k=9
(bitCount=9
) and for k=23
(bitCount=23
). The bitCount=9
means 9 1
s (and 23 0
s) are in the integer value and bitCount=23
means 23 1
s (and 9 0
) are in the integer values.
So based on the mathematics we could really answer the question via:
So this means we have 80,347,448,443,237,920 numbers where the bitCount=42
and this means
So 0,435
percent of all long values having a bitCount=42
.
Discussion (1)
TL;DR even in this day and age better algorithms still trump brute force computation.