DEV Community

Cover image for Hosting Multiple Graphs on JanusGraph
Join the Graph! profile image Bassem Naguib
Bassem Naguib for Join the Graph!

Posted on • Originally published at jointhegraph.github.io

Hosting Multiple Graphs on JanusGraph

#janusgraph #graphdatabase #tinkerpop #hbase

Introduction

In this article, I will explain how to configure JanusGraph to host multiple graphs on the same JanusGraph instance. I will start by explaining how you can add graphs from the JanusGraph configuration files. Then I will explain how to configure JanusGraph to use the ConfiguredGraphFactory so you can add and remove graphs dynamically without having to edit the configuration files or restart the JanusGraph server.

View the Default Graph Configuration

Out of the box, JanusGraph is configured to host only one graph. And to use the in-memory storage backend to save this graph data. Looking at this default graph configuration will help us determine what we need to do to add more graphs.

Go to the JanusGraph root folder and open the file "conf/gremlin-server/gremlin-server.yaml".

cd /opt/janusgraph-0.5.3/
vim conf/gremlin-server/gremlin-server.yaml
Enter fullscreen mode Exit fullscreen mode

You will see that this configuration file has a "graphs" list containing one "graph" item.

graphs: {
  graph: conf/janusgraph-inmemory.properties
}
Enter fullscreen mode Exit fullscreen mode

The key "graph" is the identifier that can be used by remote clients to access this graph. And the value is a path to a properties/configuration file that specifies things like the storage backend used to save this graph data and the mixed index backend.

Next, open the file "scripts/empty-sample.groovy".

vim scripts/empty-sample.groovy
Enter fullscreen mode Exit fullscreen mode

The last line in this file adds the identifier "g" and its value (the graph traversal source) to the globals map.

globals << [g : graph.traversal()]
Enter fullscreen mode Exit fullscreen mode

So we should be able to use the identifiers "graph" and "g" from a remote client to access the graph and the graph traversal source respectively. Let's try this!

Start the JanusGraph server.

bin/gremlin-server.sh
Enter fullscreen mode Exit fullscreen mode

And from a different terminal window start the Gremlin Console.

bin/gremlin.sh
Enter fullscreen mode Exit fullscreen mode

Then connect the Gremlin Console to the Gremlin server.

gremlin> :remote connect tinkerpop.server conf/remote.yaml
==>Configured localhost/127.0.0.1:8182
gremlin> :remote console
==>All scripts will now be sent to Gremlin Server - [localhost/127.0.0.1:8182] - type ':remote console' to return to local mode
Enter fullscreen mode Exit fullscreen mode

And try evaluating the identifiers "graph" and "g".

gremlin> graph
==>standardjanusgraph[inmemory:[127.0.0.1]]
gremlin> g
==>graphtraversalsource[standardjanusgraph[inmemory:[127.0.0.1]], standard]
Enter fullscreen mode Exit fullscreen mode

They point to the graph and the graph traversal source just as expected.

Let's add a second graph and instruct JanusGraph to save the graph data in HBase.

Start HBase

Navigate to the HBase root folder and start the HBase server.

cd opt/hbase-2.1.5/
bin/start-hbase.sh
Enter fullscreen mode Exit fullscreen mode

And start the HBase shell to see the tables that JanusGraph creates in HBase.

bin/hbase shell
Enter fullscreen mode Exit fullscreen mode

You can run the list command to see the tables that you have initially. I do not have any tables as shown in the shell output below.

hbase(main):001:0> list
TABLE
0 row(s)
Took 0.3452 seconds
=> []
Enter fullscreen mode Exit fullscreen mode

Add a Graph From the Configuration

We need to create a properties file that specifies the properties of the second graph we want to create.

Navigate to the JanusGraph root folder, copy the file "conf/janusgraph-hbase.properties", then open the copy for editing.

cd /opt/janusgraph-0.5.3/
cp conf/janusgraph-hbase.properties conf/graph2-hbase.properties
vim conf/graph2-hbase.properties
Enter fullscreen mode Exit fullscreen mode

I will add only one line to this properties file to specify the name of the HBase table that will be used to store the graph data.

storage.hbase.table = graph2
Enter fullscreen mode Exit fullscreen mode

Now open the "conf/gremlin-server/gremlin-server.yaml" file for editing.

vim conf/gremlin-server/gremlin-server.yaml
Enter fullscreen mode Exit fullscreen mode

And add a second item under "graphs". The key/identifier will be "graph2" and the value will be the path to the properties file we just created.

graphs: {
  graph: conf/janusgraph-inmemory.properties,
+ graph2: conf/graph2-hbase.properties
}
Enter fullscreen mode Exit fullscreen mode

Then open the file "scripts/empty-sample.groovy" for editing.

vim scripts/empty-sample.groovy
Enter fullscreen mode Exit fullscreen mode

And add a new graph traversal source to the globals map.

  globals << [g : graph.traversal()]
+ globals << [g2 : graph2.traversal()]
Enter fullscreen mode Exit fullscreen mode

To apply the new configuration, shutdown the JanusGraph server by pressing CTRL + c if it is already running, then start the server again.

bin/gremlin-server.sh
Enter fullscreen mode Exit fullscreen mode

JanusGraph should create the HBase table for the new graph on startup. Use the HBase shell to see if this table was created successfully.

hbase(main):002:0> list
TABLE
graph2
1 row(s)
Took 0.2073 seconds
=> ["graph2"]
Enter fullscreen mode Exit fullscreen mode

Now go to the Gremlin Console. Since we restarted the server, we will need to close the connection from the console then reconnect.

gremlin> :remote close
==>Removed - Gremlin Server - [localhost/127.0.0.1:8182]
gremlin> :remote connect tinkerpop.server conf/remote.yaml
==>Configured localhost/127.0.0.1:8182
gremlin> :remote console
==>All scripts will now be sent to Gremlin Server - [localhost/127.0.0.1:8182] - type ':remote console' to return to local mode
Enter fullscreen mode Exit fullscreen mode

And let's test the identifiers "graph2" and "g2" to see if they are recognized.

gremlin> graph2
==>standardjanusgraph[hbase:[127.0.0.1]]
gremlin> g2
==>graphtraversalsource[standardjanusgraph[hbase:[127.0.0.1]], standard]
Enter fullscreen mode Exit fullscreen mode

They are indeed recognized. So we successfully added a graph from the configuration. Which is great! But note that we had to edit the configuration files and restart the server. Depending on your use case, this may or may not be acceptable. In the next sections, I will show how to add and remove graphs dynamically without service interruptions.

Configure JanusGraph to Use the "ConfiguredGraphFactory"

The "ConfiguredGraphFactory" provides methods for dynamically managing the graphs hosted on the server. The default JanusGraph configuration does not enable the ConfiguredGraphFactory. So we need to make some changes to the configuration before we can use it.

The ConfiguredGraphFactory needs to store information about the graphs it is tracking. It uses a graph called the "Configuration Management Graph" to store this information.

We need a properties file for this configuration management graph. JanusGraph comes with two properties files that can be used for this purpose: "janusgraph-cassandra-configurationgraph.properties" and "janusgraph-cql-configurationgraph.properties". But I want to store the configuration graph in HBase. So I will create a new file "janusgraph-hbase-configurationgraph.properties" by copying one of the two files that came with JanusGraph. Then I will open the new file for editing.

cp conf/janusgraph-cql-configurationgraph.properties conf/janusgraph-hbase-configurationgraph.properties
vim conf/janusgraph-hbase-configurationgraph.properties
Enter fullscreen mode Exit fullscreen mode

There is only one line that I need to change in the new properties file to set the storage backend to "hbase" instead of "cql".

- storage.backend=cql
+ storage.backend=hbase
Enter fullscreen mode Exit fullscreen mode

And there are three changes that need to be made in the YAML configuration file. So let's open it for editing.

vim conf/gremlin-server/gremlin-server.yaml
Enter fullscreen mode Exit fullscreen mode

The three changes are:

  1. Add a graph named "ConfigurationManagementGraph" under "graphs".
  2. Add a "graphManager" property.
  3. Change the value of the "channelizer" property. 
- channelizer: org.apache.tinkerpop.gremlin.server.channel.WebSocketChannelizer
+ channelizer: org.janusgraph.channelizers.JanusGraphWebSocketChannelizer
+ graphManager: org.janusgraph.graphdb.management.JanusGraphManager
  graphs: {
    graph: conf/janusgraph-inmemory.properties,
    graph2: conf/graph2-hbase.properties,
+   ConfigurationManagementGraph: conf/janusgraph-hbase-configurationgraph.properties
  }
Enter fullscreen mode Exit fullscreen mode

To apply the new configuration, shutdown the JanusGraph server by pressing CTRL + c if it is already running, then start it again.

bin/gremlin-server.sh
Enter fullscreen mode Exit fullscreen mode

JanusGraph should create the "ConfigurationManagementGraph" on startup. Let's make sure this happened by entering the list command in the HBase shell.

hbase(main):003:0> list
TABLE
ConfigurationManagementGraph
graph2
2 row(s)
Took 0.0848 seconds
=> ["ConfigurationManagementGraph", "graph2"]
Enter fullscreen mode Exit fullscreen mode

Create a Template and Graphs Dynamically From the Client-Side

Switch to the Gremlin Console. We will need to close the old connection and reconnect because the server was restarted.

gremlin> :remote close
==>Removed - Gremlin Server - [localhost/127.0.0.1:8182]
gremlin> :remote connect tinkerpop.server conf/remote.yaml session
==>Configured localhost/127.0.0.1:8182-[be2df6ef-df68-4061-9ee0-c172e40c1d92]
gremlin> :remote console
==>All scripts will now be sent to Gremlin Server - [localhost/127.0.0.1:8182]-[be2df6ef-df68-4061-9ee0-c172e40c1d92] - type ':remote console' to return to local mode
Enter fullscreen mode Exit fullscreen mode

Note than this time I connected to the server using a "sessioned connection". This is because it is much easier to build the template configuration map by sending multiple commands to the server.

The following code creates a template configuration. Then creates two graphs: "dynamic1" and "dynamic2" based on this template.

templateConfMap = new HashMap();
templateConfMap.put("storage.backend", "hbase");
templateConfMap.put("storage.hostname", "localhost");
ConfiguredGraphFactory.createTemplateConfiguration(new MapConfiguration(templateConfMap));

ConfiguredGraphFactory.create("dynamic1")
ConfiguredGraphFactory.create("dynamic2")
Enter fullscreen mode Exit fullscreen mode

Creating these graphs adds the global identifiers "dynamic1" and "dynamic2" for the graph objects. And adds the global identifiers "dynamic1_traversal" and "dynamic2_traversal" for the graph traversal source objects. These identifiers enable clients to access the new graphs.

We cannot use these identifiers right now because we are using a sessioned connection that was established before the identifiers were created. So we need to disconnect from the server and reconnect to bind the new identifiers.

:remote close
:remote connect tinkerpop.server conf/remote.yaml
:remote console
Enter fullscreen mode Exit fullscreen mode

Now try evaluating the new identifiers to make sure they are defined.

gremlin> dynamic1
==>standardjanusgraph[hbase:[localhost]]
gremlin> dynamic1_traversal
==>graphtraversalsource[standardjanusgraph[hbase:[localhost]], standard]
gremlin> dynamic2
==>standardjanusgraph[hbase:[localhost]]
gremlin> dynamic2_traversal
==>graphtraversalsource[standardjanusgraph[hbase:[localhost]], standard]
Enter fullscreen mode Exit fullscreen mode

These identifiers will NOT be forgotten when the JanusGraph server is restarted.

Now list the tables from the HBase shell to see the tables that JanusGraph created for the new graphs.

hbase(main):004:0> list
TABLE
ConfigurationManagementGraph
dynamic1
dynamic2
graph2
4 row(s)
Took 0.0779 seconds
=> ["ConfigurationManagementGraph", "dynamic1", "dynamic2", "graph2"]
Enter fullscreen mode Exit fullscreen mode

Other Functions of the ConfiguredGraphFactory

The ConfiguredGraphFactory can be used to get the list of names of the graphs that it is tracking.

gremlin> ConfiguredGraphFactory.getGraphNames()
==>dynamic1
==>dynamic2
Enter fullscreen mode Exit fullscreen mode

It can also be used to drop graphs.

gremlin> ConfiguredGraphFactory.drop('dynamic2')
==>null
gremlin> ConfiguredGraphFactory.getGraphNames()
==>dynamic1
Enter fullscreen mode Exit fullscreen mode

Top comments (0)

Read next

xavier2code profile image

Daliy.rust day 3

xavier2code -

xavier2code profile image

Daily.rust day 2

xavier2code -

saif_uddin profile image

Why Every Developer Should Embrace DevOps 🚀

Saif Uddin -

xavier2code profile image

Daily.rust day 1

xavier2code -