In this blog, we will learn about the command-line interface in Windows, Linux, and Mac-OS and we will learn some basic commands and how to use them.
What is the command line?
- The command line, also called the Windows command line, command screen, or text interface is a user interface that is navigated by typing commands at prompts, instead of using the mouse.
- In the 1960s, using only computer terminals, this was the only way to interact with computers.
- In the 1970s and 1980s, command line input was commonly used by Unix systems and PC systems like MS-DOS and Apple DOS.
- Today, with graphical user interfaces (GUI), most users never use command-line interfaces (CLI).
- However, CLI is still used by software developers and system administrators to configure computers, install software, and access features that are not available in the graphical interface.
Open the command-line interface. To start some experiments we need to open our command-line interface first.
Depending on your version of Windows and your keyboard, one of the following should open a command window (you may have to experiment a bit, but you don't have to try all of these suggestions):
- Go to the Start menu or screen, and enter "Command Prompt" in the search field.
- Go to Start menu → Windows System → Command Prompt.
- Go to Start menu → All Programs → Accessories → Command Prompt.
- Go to the Start screen, hover your mouse in the lower-left corner of the screen, and click the down arrow that appears (on a touch screen, instead flick up from the bottom of the screen). The Apps page should open. Click on Command Prompt in the Windows System section.
- Hold the special Windows key on your keyboard and press the "X" key. Choose "Command Prompt" from the pop-up menu.
- Hold the Windows key and press the "R" key to get a "Run" window. Type "cmd" in the box, and click the OK key.
Opening: OS X
Go to Applications → Utilities → Terminal.
It's probably under Applications → Accessories → Terminal, or Applications → System → Terminal, but that may depend on your system. If it's not there, you can try to Google it. :)
You now should see a white or black window that is waiting for your commands.
Prompt: OS X and Linux
If you're on Mac or Linux, you probably see a $ , like this:
On Windows, you probably see a > , like this:
Your first command (YAY!)
Let's start by typing this command:
Your first command: OS X and Linux
Your first command: Windows
And then hit enter . This is our result:
$ whoami altaf
As you can see, the computer has just printed your username. Neat, huh? :)
Use CLI commands with great attention!!! Wrong use can easily delete files or destroy your computer system completely.
Each operating system has a slightly different set of commands for the command line, so make sure to follow instructions for your operating system.
It'd be nice to know where are we now, right? Let's see. Type this command and hit enter :
Current directory: OS X and Linux
$ pwd /home/altaf
Note: 'pwd' stands for 'print working directory'.
Current directory: Windows
> cd C:\Users\altaf
Note: 'cd' stands for 'change directory'. With powershell you can use pwd just like on Linux or Mac OS X.
Learn more about a command
Many commands you can type at the command prompt have built-in help that you can display and read! For example, to learn more about the current directory command:
Command help: OS X and Linux
OS X and Linux have a man command, which gives you help on commands. Try
man pwd and see what it says, or put man before other commands to see their help. The output of man is normally paged. Use the space bar to move to the next page, and q to quit looking at the help.
Command Help: Windows
a /? suffix to most commands will print the help page. You may need to scroll your command window up to see it all. Try
cd /? .
List files and directories
So what's in it? It'd be cool to find out. Let's see:
List files and directories: OS X and Linux
$ ls Documents Pictures Downloads Public Music Videos Desktop
List files and directories: Windows command-line
> dir Directory of C:\Users\altaf 05/08/2014 07:28 PM <DIR> Applications 05/08/2014 07:28 PM <DIR> Desktop 05/08/2014 07:28 PM <DIR> Downloads 05/08/2014 07:28 PM <DIR> Music ...
Note: In powershell you can also use 'ls' like on Linux and Mac OS X.
Change current directory
Now, let's go to our Desktop directory:
Change current directory: OS X and Linux
$ cd Desktop
Change current directory: Windows
> cd Desktop
Check if it's really changed:
Check if changed: OS X and Linux
$ pwd /Users/altaf/Desktop
Check if changed: Windows
> cd C:\Users\altaf\Desktop
Here it is!
PRO tip: if you type cd D and then hit tab on your keyboard, the command line will automatically fill in the rest of the name so you can navigate faster. If there is more than one folder starting with "D", hit the tab key twice to get a list of options.
How about creating a practice directory on your desktop? You can do it this way:
Create directory: OS X and Linux
$ mkdir practice
Create directory: Windows
> mkdir practice
This little command will create a folder with the name practice on your desktop. You can check if it's there by looking on your Desktop or by running a ls or dir command! Try it. :)
PRO tip: If you don't want to type the same commands over and over, try pressing the up arrow and down arrow on your keyboard to cycle through recently used commands.
We don't want to leave a mess, so let's remove everything we did until that point. First, we need to get back to Desktop:
Clean up: OS X and Linux
$ cd ..
Clean up: Windows
> cd ..
Using .. with the cd command will change your current directory to the parent directory (that is, the directory that contains your current directory).
Check where you are:
Check location: OS X and Linux
$ pwd /Users/altaf/Desktop
Check location: Windows
> cd C:\Users\altaf\Desktop
Now time to delete the practice directory:
**Attention:** Deleting files using **del**, **rmdir** or **rm** is irrecoverable, meaning the deleted files will be gone forever!
So be very careful with this command.
Delete directory: Windows Powershell, OS X and Linux
$ rm -r practice
Delete directory: Windows Command Prompt
> rmdir /S practice practice, Are you sure <Y/N>? Y
Done! To be sure it's actually deleted, let's check it:
Check deletion: OS X and Linux
Check deletion: Windows
That's it for now! You can safely close the command line now. Let's do it the hacker way, alright? :)
Exit: OS X and Linux
Cool, huh? :)
Pro Tip :
When you want to copy from the terminal or paste into the terminal instead of using the right-click option you can use a keyboard shortcut for copy and paste. To copy from terminal use ctrl + shift +c and to paste into the terminal use ctrl + shift + v. This will save your time. Cool!, huh? :)
Here is a summary of some useful commands:
|Scenario(when u want to)||Windows Command||Command (Mac OS / Linux)||Description||Example|
|See which files are present in a directory||dir||ls||list directories/files||dir|
|Create a directory||mkdir||mkdir||create a new directory||mkdir testdirectory|
|Move a file or dir into other location||move||mv||move file||move c:\test\test.txt c:\windows\test.txt|
|Exit from the terminal||exit||exit||close the window||exit|
|Copy a file or dir into other location||copy||cp||copy file||copy c:\test\test.txt c:\windows\test.txt|
|Go inside a directory||cd||cd||change directory||cd test|
|See the full path of the current directory||cd||cd||show the current directory||cd (Windows) or pwd (Mac OS / Linux)|
|Delete a file from the system||rmdir (or del)||rm||delete a file||del c:\test\test.txt|
|Delete directory from the system||rmdir /S||rm -r||delete a directory||rm -r testdirectory|
|Check the usage of a command||[CMD] /?||man [CMD]||get help for a command||cd /? (Windows) or man cd (Mac OS / Linux)|
I hope the article was helpful to you!
Latest comments (3)
Powershell is more common with WindowsOS nowadays as I believe they intend to retire the Command Prompt
Your "tidy up" section implies you're missing a step. You create a directory, then move up a directory, then try to delete the directory you created. You never changed into it, so you're now in the wrong place.
Hello Ben, I am assuming that user is in the
practicedir and then I am going one level up and using
cdcommand (without path) to check the present working dir and not for changing the dir. so that we can delete it from the parent dir.
Hope you got clarity on this : D