DEV Community

Cover image for Committing to the wrong branch
Jason McCreary
Jason McCreary

Posted on • Originally published at jason.pureconcepts.net

Committing to the wrong branch

Lately CodeRabbi has been tweeting some Git aliases. We all know where I stand on aliases. Be that as it may, his recent tweet received a lot of replies proposing different solutions.

This contributes to the steep learning curve with Git - what's the proper way to do something? I try to address in Getting Git by showing different ways Git commands may be used.

In this case, an alias of move was created to solve the problem of committing work to an incorrect branch. It did so by running the following commands.

MESSAGE=$(git log -1 HEAD --pretty=format:%s)
git reset HEAD~ --soft
git stash
git checkout destination-branch
git stash pop
git add .
git commit -m $MESSAGE
Enter fullscreen mode Exit fullscreen mode

As mentioned in the replies, there are other ways to solve this problem.

Before exploring alternative solutions, I want to address the ambiguity of the problem. In order to determine the proper solution, we need to answer a few questions:

  1. Does the destination branch exist or does it need to be created?
  2. Did I commit on top of work that does not belong on the destination branch?
  3. How many commits did I make incorrectly?

For me, proper means using commands with side-effects so I expend the minimal effort.

By that definition, I immediately rule out the use of stash. While stash is a helpful Git command, it is very nuanced. For example, it stashes everything in the index, but not untracked files. This may not be what you want. Maybe you just want staged changes. Maybe you do want untracked files.

There's also no need to reset the commit just to recommit it on another branch. The assumption being you want the commit as is. You just made it on the wrong branch.

Let's look at some alternative solutions.

checkout + reset

A straightforward solution is to simply create another branch from your current branch. It will have the same commit history and therefore contain the incorrect commit. This allows you to remove the commit from the current branch. Then you can checkout the new branch and complete your work.

git branch destination-branch
git reset --hard HEAD~1
git checkout destination-branch
Enter fullscreen mode Exit fullscreen mode

Assumptions

This makes the assumption that the destination branch does not exist. It also assumes all previous commits belong on the destination branch. If either of these assumptions are not true, use the cherry-pick solution.

This also assumes you only made one commit incorrectly. If you made more, increase the relative reference accordingly (e.g. HEAD~2, HEAD~3, etc)

cherry-pick

Another solution is to use cherry-pick. As noted above, cherry picking may be used when the commit histories differ or the destination branch already exists.

First, you create and checkout the destination branch. You pass the second argument to checkout to reference a branch point since the branches don't have the same commit history. Then you can cherry-pick the incorrect commits. Once done, you can switch back to the previous branch and reset the incorrect commits.

git checkout -b destination-branch good-reference
git cherry-pick 12345
git checkout -
git reset --hard HEAD~1
Enter fullscreen mode Exit fullscreen mode

Assumptions

This assumes the destination branch does not exist. If it does, change the first command to: git checkout destination-branch.

As with other solutions, if you made more than one commit incorrectly, you will need to run cherry-pick for each of the incorrect commits. You may also pass cherry-pick a range as of Git 1.7.2. For example, if eddd21 referenced your first incorrect commit and 7e6802 referenced the last, you could run: git cherry-pick eddd21^..7e6802. Cherry picking a range has its own nuances. I often find I just run the individual cherry-pick commands.

push + reset

In some scenarios, you may be able to simply push your current branch to a remote branch of a different name. Then reset your local branch to remove the incorrect commit.

git push origin HEAD:destination-branch
git reset --hard HEAD~1
Enter fullscreen mode Exit fullscreen mode

Assumptions

This assumes you are working with remote branches. It also assumes the commit histories are the same, but it does not matter if the destination branch exists or not.

As with other solutions, adjust the relative reference used in the reset command to remove the appropriate number of commits.

Conclusion

You can see why Git can be challenging to learn and use. There are at least four different solutions for this one problem. While I advocate for a solution that keeps the commands simple, I hope by demonstrating all solutions you learned when to apply each.

Want to see more every day Git scenarios? In addition to learning about core commands, the Getting Git video series also demonstrates the commands you'll use to solve every day problems with Git.

Top comments (1)

Collapse
 
gameoverwill profile image
Wilfredo Pérez

Yesterday that happened to me, I read the post to late, thanks a lot now I know what I can do.