--- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: n
Press RETURN to get started!
Router>en
Router>enable
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int gig
Router(config)#intgigabitEthernet 0/0
Router(config-if)#ip add 192.168.10.5 255.255.255.252
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
Router(config-if)#exit
Router(config)#int gig
Router(config)#intgigabitEthernet 0/0
Router(config-if)#ip add 192.168.20.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#int gig
Router(config)#intgigabitEthernet 0/0.50
Router(config-subif)#encapsulation dot1Q 50
Router(config-subif)#ip add 192.168.50.135 255.255.255.128
Router(config-subif)#exit
Router(config)#intgigabitEthernet 0/0.60
Router(config-subif)#
Router(config-subif)#encapsulation dot1Q 60
Router(config-subif)#ip add 192.168.60.71 255.255.255.192
Router(config-subif)#exit
Router(config)#
Top comments (0)
Subscribe
For further actions, you may consider blocking this person and/or reporting abuse
Top comments (0)