DEV Community

Cover image for Safe Data Fetching in Modern JavaScript
Steve Sewell for Builder.io

Posted on • Originally published at builder.io

Safe Data Fetching in Modern JavaScript

Fetch - the wrong way

fetch in JavaScript is awesome.

But, you may have something like this sprinkled throughout your code:



const res = await fetch('/user')
const user = await res.json()


Enter fullscreen mode Exit fullscreen mode

While nice and simple, this code has a number of issues.

You could say “oh, yeah, handle errors”, and rewrite it like this:



try {
  const res = await fetch('/user')
  const user = await res.json()
} catch (err) {
  // Handle the error
}


Enter fullscreen mode Exit fullscreen mode

That is an improvement, certainly, but still has issues.

Here, we’re assuming user is in fact a user object… but that assumes that we got a 200 response.

But fetch does not throw errors for non-200 statuses, so you could have actually received a 400 (bad request), 401 (not authorized), 404 (not found), 500 (internal server error), or all kinds of other issues.

A safer, but uglier way

So, we could make another update:



try {
  const res = await fetch('/user')

  if (!res.ok) {
    switch (res.status) {
      case 400: /* Handle */ break
      case 401: /* Handle */ break
      case 404: /* Handle */ break
      case 500: /* Handle */ break
    }
  }

  // User *actually* is the user this time
  const user = await res.json()
} catch (err) {
  // Handle the error
}


Enter fullscreen mode Exit fullscreen mode

Now, we’ve finally achieved a pretty good usage of fetch. But this can be a bit clunky to have to remember to write out every time, and you’d have to hope everyone on your team is handling each of these situations every time.

It also isn’t the most elegant in terms of control flow. In terms of readability, I personally prefer the problematic code at the beginning of this article (in some ways). It read pretty cleanly - fetch the user, parse to json, do things with user object.

But in this format we have fetch the user, handle a bunch of error cases pare the json, handle other error cases etc. It’s a little jarring, especially when at this point we have error handling both above and below our business logic, as opposed to centralized in one place.

A less ugly way

A more elegant solution could be to throw if the request has problems, as opposed to handling errors in multiple places:



try {
  const res = await fetch('/user')

  if (!res.ok) {
    throw new Error('Bad fetch response')
  }

  // User *actually* is the user this time
  const user = await res.json()
} catch (err) {
  // Handle the error
}


Enter fullscreen mode Exit fullscreen mode

But we’re left with one last problem - when it comes time to handle the error, we’ve lost a lot of useful context. We can’t actually access res in the catch block, so at the time of processing the error we don’t actually know what the status code or body of the response was.

This will make it hard to know the best action to take, as well as leave us with very uninformative logs.

An improved solution here could be to create your own custom error class, where you can forward the response details:



class ResponseError extends Error {
  constructor(message, res) {
    super(message)
    this.response = res
  }
}

try {
  const res = await fetch('/user')

  if (!res.ok) {
    throw new ResponseError('Bad fetch response', res)
  }

  const user = await res.json()
} catch (err) {
  // Handle the error, with full access to status and body
  switch (err.response.status) {
    case 400: /* Handle */ break
    case 401: /* Handle */ break
    case 404: /* Handle */ break
    case 500: /* Handle */ break
  }
}


Enter fullscreen mode Exit fullscreen mode

Now, when we preserve the status codes, we can be much smarter about the error handling.

For instance, we can alert the user on a 500 that we had an issue, and to potentially try again or contact our support.

Or if the status is 401, they are currently unauthorized and may need to log in again, etc.

Creating a wrapper

I’ve got one last issue with our latest and greatest solution - it still depends on the developer to write a decent bit of boilerplate every time. Making changes project-wide, or enforcing that we always use this structure, can still be a challenge.

That’s where we can wrap fetch to handle things as we need:



class ResponseError extends Error {
  constructor(message, res) {
    this.response = res
  }
}

export async function myFetch(...options) {
  const res = await fetch(...options)
  if (!res.ok) {
    throw new ResponseError('Bad fetch response', res)
  }
  return res
}


Enter fullscreen mode Exit fullscreen mode

And then we can use it as follows:



try {
  const res = await myFetch('/user')
  const user = await res.json()
} catch (err) {
  // Handle issues via error.response.*
}


Enter fullscreen mode Exit fullscreen mode

In our final example, it would be good to ensure we have a unified way that we handle errors. This may include alerts to users, logging, etc.

Open source solutions

Exploring this was fun and all, but it’s important to keep in mind that you don’t always have to create your own wrappers for things. Here are some preexisting options that are popular and may be worth using, including some that are under 1kb in size:

Axios

Axios is a very popular option for data fetching in JS, which handles several of the above scenarios for us automatically.



try {
  const { data } = await axios.get('/user')
} catch (err) {
  // Handle issues via error.response.*
}


Enter fullscreen mode Exit fullscreen mode

My only critique of Axios is it is surprisingly large for a simple data fetching wrapper. So if kb size is a priority for you (which I’d argue it generally should be to keep your performance top notch), you may want to check out one of the below two options:

Redaxios

If you love Axios, but don’t love that it’ll add 11kb to your bundle, Redaxios is a great alternative, that uses the same API as Axios, but in less than 1kb.



import axios from 'redaxios'
// use as you would normally


Enter fullscreen mode Exit fullscreen mode

Wretch

One newer option, which is a very thin wrapper around Fetch much like Redaxios, is Wretch. Wretch is unique in that it largely still feels like fetch, but gives you helpful methods for handling common statuses which can chain together nicely:



const user = await wretch("/user")
  .get()
  // Handle error cases in a more human-readable way
  .notFound(error => { /* ... */ })
  .unauthorized(error => { /* ... */ })
  .error(418, error => { /* ... */ })
  .res(response => /* ... */)
  .catch(error => { /* uncaught errors */ })


Enter fullscreen mode Exit fullscreen mode

Don’t forget to write data safely, too

Last but not least, let’s not forget that using fetch directly can have common pitfalls when sending data via a POST, PUT, or PATCH

Can you spot the bug in this code?



// 🚩 We have at least one bug here, can you spot it?
const res = await fetch('/user', {
  method: 'POST',
  body: { name: 'Steve Sewell', company: 'Builder.io' }
})


Enter fullscreen mode Exit fullscreen mode

There is at least one, but likely two.

First, if we are sending JSON, the body property must be a JSON-serialized string:



const res = await fetch('/user', {
  method: 'POST',
  // ✅ We must JSON-serialize this body
  body: JSON.stringify({ name: 'Steve Sewell', company: 'Builder.io' })
})


Enter fullscreen mode Exit fullscreen mode

That can be easy to forget, but if we are using TypeScript this can at least be caught for us automatically.

An additional bug, which TypeScript will not catch for us, is that we are not specifying the Content-Type header here. Many backends require you to specify this, as they will not process the body properly otherwise.



const res = await fetch('/user', {
  headers: {
    // ✅ If we are sending serialized JSON, we should set the Content-Type:
    'Content-Type': 'application/json'
  },
  method: 'POST',
  body: JSON.stringify({ name: 'Steve Sewell', company: 'Builder.io' })
})


Enter fullscreen mode Exit fullscreen mode

Now, we have a relatively robust and safe solution.

(Optionally) Adding automatic JSON support to our wrapper

We could decide to add some safety for these common situations in our wrapper as well. For instance with the below code:



const isPlainObject = value => value?.constructor === Object

export async function myFetch(...options) {
  let initOptions = options[1]
  // If we specified a RequestInit for fetch
  if (initOptions?.body) {
    // If we have passed a body property and it is a plain object or array
    if (Array.isArray(initOptions.body) || isPlainObject(initOptions.body)) {
      // Create a new options object serializing the body and ensuring we
      // have a content-type header
      initOptions = {
        ...initOptions,
        body: JSON.stringify(initOptions.body),
        headers: {
          'Content-Type': 'application/json',
          ...initOptions.headers
        }
      }
    }
  }

  const res = await fetch(...initOptions)
  if (!res.ok) {
    throw new ResponseError('Bad fetch response', res)
  }
  return res
}


Enter fullscreen mode Exit fullscreen mode

And now we can just use our wrapper like so:



const res = await myFetch('/user', {
  method: 'POST',
  body: { name: 'Steve Sewell', company: 'Builder.io' }
})


Enter fullscreen mode Exit fullscreen mode

Simple and safe. I like.

Open source solutions

While it is fun and interesting to define our own abstractions, let’s make sure to point out how a couple popular open source projects also handle these situations for us automatically:

Axios/Redaxios

For Axios and Redaxios, code similar to our original “flawed” code with raw fetch actually works as expected:



const res = await axios.post('/user', {
  name: 'Steve Sewell', company: 'Builder.io' 
})


Enter fullscreen mode Exit fullscreen mode

Wretch

Similarly, with Wretch, the most basic example works as expected as well:



const res = await wretch('/user').post({ 
  name: 'Steve Sewell', company: 'Builder.io' 
})


Enter fullscreen mode Exit fullscreen mode

(Optionally) Making our wrapper type-safe

Last, but not least, if you want to implement your own wrapper around fetch, let’s at least make sure it is type-safe with TypeScript if that is what you are using (and hopefully you are!).

Here is our final code, including type definitions:



const isPlainObject = (value: unknown) => value?.constructor === Object

class ResponseError extends Error {
  response: Response

  constructor(message: string, res: Response) {
    super(message)
    this.response = res
  }
}

export async function myFetch(input: RequestInfo | URL, init?: RequestInit): Promise<Response> {
  let initOptions = init
  // If we specified a RequestInit for fetch
  if (initOptions?.body) {
    // If we have passed a body property and it is a plain object or array
    if (Array.isArray(initOptions.body) || isPlainObject(initOptions.body)) {
      // Create a new options object serializing the body and ensuring we
      // have a content-type header
      initOptions = {
        ...initOptions,
        body: JSON.stringify(initOptions.body),
        headers: {
          "Content-Type": "application/json",
          ...initOptions.headers,
        },
      }
    }
  }

  const res = await fetch(input, initOptions)
  if (!res.ok) {
    throw new ResponseError("Bad response", res)
  }
  return res
}


Enter fullscreen mode Exit fullscreen mode

One last gotcha

When using our shiny new type-safe fetch wrapper, you will run into one last issue. In a catch block in typescript, by default error is of any type



try {
  const res = await myFetch
} catch (err) {
  // 🚩 Doh, error is of `any` type, so we missed the below typo:
  if (err.respons.status === 500) ...
}



Enter fullscreen mode Exit fullscreen mode

You could say, oh! I’ll just type the error:



try {
  const res = await myFetch
} catch (err: ResponseError) {
  // 🚩 TS error 1196: Catch clause variable type annotation must be 'any' or 'unknown' if specified
}


Enter fullscreen mode Exit fullscreen mode

Ugh, that’s right, we can’t type errors in TypeScript. That’s because technically you can throw anything in TypeScript, anywhere. The below is all valid JavaScript/TypeScript and could theoretically exist in any try block



throw null
throw { hello: 'world' }
throw 123
// ...


Enter fullscreen mode Exit fullscreen mode

Not to mention that fetch itself could throw it’s own error that is not a ResponseError, for example for network errors such as no connection being available.

We could also accidentally have a legitimate bug in on our fetch wrapper that throws other errors like a TypeError

So a final, clean, and type-safe usage of this wrapper, would be something like:



try {
  const res = await myFetch
  const user = await res.body()
} catch (err: unknown) {
  if (err instanceof ResponseError) {
    // Nice and type-safe!
    switch (err.response.status) { ... }
  } else {
    throw new Error('An unknown error occured when fetching the user', {
      cause: err
    })
}


Enter fullscreen mode Exit fullscreen mode

Here, we can check with instanceof if err is a ResponseError instance, and get full type safety within the conditional block for the error response.

And then we can also re-throw an error if any unexpected errors occured, and use the new cause property in JavaScript to forward the original error details for nicer debugging.

Reusable error handling

Finally, it may be nice to not always have to have a custom built switch for every possible error status for each HTTP call.

It would be nice to encapsulate our error handling into a reusable function, that we can use as a fallback after we handle any one-off cases we know we want special logic for that is unique to this call.

For instance, we may have a common way we want to alert users of a 500 with an "oops, sorry, please contact support" message, or for a 401 a "please log in again" message, as long as there is not a more specific way we want to handle this status for this particular request.

This, in practice, could for example look like:



try {
  const res = await myFetch('/user')
  const user = await res.body()
} catch (err) {
  if (err instanceof ResponseError) {
    if (err.response.status === 404) {
      // Special logic unique to this call where we want to handle this status,
      // like to say on a 404 that we seem to not have this user
      return
    }
  }
  // ⬇️ Handle anything else that we don't need special logic for, and just want
  // our default handling
  handleError(err)
  return
}


Enter fullscreen mode Exit fullscreen mode

Which we could implement like:



export function handleError(err: unkown) {
// Safe to our choice of logging service
saveToALoggingService(err);

if (err instanceof ResponseError) {
switch (err.response.status) {
case 401:
// Prompt the user to log back in
showUnauthorizedDialog()
break;
case 500:
// Show user a dialog to apologize that we had an error and to
// try again and if that doesn't work contact support
showErrorDialog()
break;
default:
// Show
throw new Error('Unhandled fetch response', { cause: err })
}
}
throw new Error('Unknown fetch error', { cause: err })
}

Enter fullscreen mode Exit fullscreen mode




With Wretch

This is one place I think Wretch shines, as the above code could similarly look like:



try {
const res = await wretch.get('/user')
.notFound(() => { /* Special not found logic */ })
const user = await res.body()
} catch (err) {
// Catch anything else with our default handler
handleError(err);
return;
}

Enter fullscreen mode Exit fullscreen mode




With Axios/Redaxios

With Axios or Redaxios, things look similar to our original example



try {
const { data: user } = await axios.get('/user')
} catch (err) {
if (axios.isAxiosError(err)) {
if (err.response.status === 404) {
// Special not found logic
return
}
}
// Catch anything else with our default handler
handleError(err)
return
}

Enter fullscreen mode Exit fullscreen mode




Conclusion

And there we have it!

If not otherwise clear, I would personally recommend using an off the shelf wrapper for fetch, as they can be very small (1-2kb), and generally have more documentation, testing, and community in place, besides being already proven and verified by others as an effective solution.

But all of this said, whether you choose to manually use fetch, write your own wrapper, or use an open source wrapper - for the sake of your users and your team, please be sure to fetch your data properly :)

About me

Hi! I'm Steve, CEO of Builder.io.

If you like our content, you can subscribe to us on dev.totwitter, or our newsletter.

We make a way to drag + drop with your components to create pages and other CMS content on your site or app, visually.

You can read more about how this can improve your workflow here.

You may find it interesting or useful:

Builder.io demo

Top comments (15)

Collapse
 
webjose profile image
José Pablo Ramírez Vargas
try {
  const res = await fetch('/user')

  if (!res.ok) {
    throw new ResponseError('Bad fetch response', res)
  }

  const user = await res.json()
} catch (err) {
  // Handle the error, with full access to status and body
  switch (err.response.status) {
    case 400: /* Handle */ break
    case 401: /* Handle */ break
    case 404: /* Handle */ break
    case 500: /* Handle */ break
  }
}

export function handleError(err: unkown) {
  // Safe to our choice of logging service
  saveToALoggingService(err);

  if (err instanceof ResponseError) {
    switch (err.response.status) {
      case 401:
        // Prompt the user to log back in
        showUnauthorizedDialog()
        break;
      case 500: 
        // Show user a dialog to apologize that we had an error and to 
        // try again and if that doesn't work contact support
        showErrorDialog()
        break;
      default:
        // Show 
        throw new Error('Unhandled fetch response', { cause: err })
    }
  } 
  throw new Error('Unknown fetch error', { cause: err })
}
Enter fullscreen mode Exit fullscreen mode

Constructions like this one where logic is driven by exceptions is an anti-pattern. This should be avoided. Unwinding the call stack is costly (probably in all modern languages).

Collapse
 
simonireilly profile image
Simon

Friends don't let friends use errors for flow control 👍

Collapse
 
synneks profile image
Denis Eneotescu

Can you explain a bit better, I don't understand what you are trying to say. How else would you handle each response status?

Collapse
 
webjose profile image
José Pablo Ramírez Vargas

An HTTP response is just that, a response coming from the wire. Its status code is meaningless and its interpretation is given by the receptor. By itself, status code is just a number. There is no technical reason to raise an exception (throw an error) if a particular number is received.

This is particularly true when consuming RESTful API's. You may receive a 404 indicating the resource you're looking for is not found. Just because something isn't found we need to throw an error? Hell no.

Collapse
 
philw_ profile image
Phil Wolstenholme

+1 for Wretch :) For anyone evaluating options, there's github.com/sindresorhus/ky which is a similar wrapper too.

Collapse
 
iamdevmarcos profile image
Marcos Mendes

very nice post, + 1 follower

Collapse
 
willmand profile image
willmand

Excelente. Gracias

Collapse
 
alchemylab profile image
Luigi Pesce

A good explanation around fetching and posting data

Collapse
 
vishal8888a8 profile image
vishal giri

Great Post

Collapse
 
tohka200213 profile image
tohka20-0213 • Edited

Thanks for the great post!

I have a question about this sentence.

We can’t actually access res in the catch block, so at the time of processing the error we don’t actually know what the status code or body of the response was.

Is there any problem with the code of using Error.prototype.cause?
Below is a sample code.

try {
  const res = await fetch("/user");
  if (!res.ok) {
    throw new Error("Bad fetch response", {
      cause: {
        type: "response",
        value: res.status,
      },
    });
  }
  const user = await res.json()
} catch (err) {
  if (err.cause.type === "response") {
    switch (err.cause.value) {
        case 400: /* Handle */ break
        case 401: /* Handle */ break
        case 404: /* Handle */ break
        case 500: /* Handle */ break
    }
  }
}

Enter fullscreen mode Exit fullscreen mode
Collapse
 
steve8708 profile image
Steve Sewell • Edited

So I frankly like this solution, and even made a video suggesting it, but some believe it is an anti pattern so I suggested to use a custom Error subclass in this post instead. I think jury is out if it’s wrong to use the cause property for things that aren’t errors

Collapse
 
tohka200213 profile image
tohka20-0213

Thanks for your reply!

but some believe it is an anti pattern so I suggested to use a custom Error subclass in this post instead.

What points and reasons do they believe it is an anti-pattern?

Thread Thread
 
steve8708 profile image
Steve Sewell

The idea is that cause is supposed to be used for an Error, like described here v8.dev/features/error-cause, as it's main intent is when an error with a cause is thrown, the original error stack trace is printed along with it

Now, in JS, technically you can throw anything, like throw 'hello' or throw 1234 but it's pretty heavily discouraged. Some replies to my video pointed out that because you can throw anything, the cause property must allow anything, but it similarly is best used for only error instances. Plus the benefit of errors in JS is that you can put any properties you want on them, like error.response or whatever, so I thought that was a fair suggestion to use that just to be safe and stick to continuing to use cause just for actual errors

I think this all depends a bit on how browsers handle visualizing error causes though, which I have not played with in detail myself, so I think time will really tell on what the best patterns actually are here

Collapse
 
d3press3dd profile image
Anthony Rosman

Nice article

Collapse
 
elsyng profile image
Ellis • Edited

Nice post.

A js alternative which i find simpler to use:
a fetchXyz() function which returns an object like: { result, error }
where error could be a simple string.

Then you use it like:

const { result, error } = await fetchXyz(url);
if (error) --> handle the error
else --> handle your data
Enter fullscreen mode Exit fullscreen mode