DEV Community

Binoy
Binoy

Posted on

Setup JFrog Artifactory on Kubernetes and Connect Spring Boot Application

#kubernetes #springboot #java #jfrog

This document provides guidance on setting up JFrog Artifactory in a Kubernetes cluster. It serves as a basic tutorial for developers to install and configure JFrog on a Kubernetes environment running on a local machine.

Setup local environment to build DevOps resources

I use Docker containers to set up work environments for multiple applications(Setup Environment). This approach ensures fully isolated and maintainable environments for application development, allowing us to easily start and terminate these environments. Below is the Docker command to create the environment.

docker run -it --name test-jfrog-envornment-box -v ${HOME}/root/ -v ${PWD}/work -w /work --net host developerhelperhub/kub-terr-work-env-box sh
Enter fullscreen mode Exit fullscreen mode

The container contains Docker, Kubectl, Helm, Terraform, Kind, Git

Setup JFrog on Kubernetes Cluster

I have created all scripts, which are available in the GitHub repository. You can download and set up JFrog on a Kubernetes cluster, which runs locally in a Docker container.

Clone the repository onto your local Linux machine to get started.

git clone https://github.com/developerhelperhub/kuberentes-help.git
cd kuberentes-help/kubenretes/tutorials/sections/0009/
Enter fullscreen mode Exit fullscreen mode

Set up the Kubernetes cluster in a Docker container using Kind, naming the cluster “devops-jfrog-cluster-control-plane” This cluster supports ingress and exposes ports 80 and 443 to allow access to services from outside the cluster.

Cluster create terraform script available under kind folder

cd kind
terraform init #Install the required providers to set up the necessary resources.
terraform plan #Verify the resources that will be installed on the system.
terraform apply #Install resources on the system
Enter fullscreen mode Exit fullscreen mode

Following command verify the cluster

kubectl cluster-info
kubectl get nodes -o wide
Enter fullscreen mode Exit fullscreen mode

Setup Nginx ingress controller on Kubernetes cluster
The NGINX Ingress Controller to manage the external access to services in a Kubernetes cluster. It acts as an entry point for your Kubernetes applications, routing external HTTP and HTTPS traffic to the appropriate services within the cluster.

Following command install the ingress controller on cluster

Ingress create script available under “ingress” folder

cd ingress
kubectl apply -f ingress-nginx.yaml
Enter fullscreen mode Exit fullscreen mode

Following command verify the nginx ingress controller

kubectl get -n ingress-nginx pod
Enter fullscreen mode Exit fullscreen mode

Output

NAME                                       READY   STATUS      RESTARTS   AGE
ingress-nginx-admission-create-5mt2k       0/1     Completed   0          53s
ingress-nginx-admission-patch-w2rlk        0/1     Completed   0          53s
ingress-nginx-controller-d45d995d4-gl65h   1/1     Running     0          53s
Enter fullscreen mode Exit fullscreen mode

Setup JFrog Artifactory OSS (Open Source)

Add the JFrog Artifactory OSS Community Helm Repository: To begin, you need to add the JFrog Artifactory OSS community Helm repository to your Helm client:

Note: JFrog create scripts available under “jfrog” folder

helm repo add jfrog https://charts.jfrog.io
helm repo update
Enter fullscreen mode Exit fullscreen mode

The following command can be used to verify the app version and chart version of the services installed in the cluster:

helm search repo  artifactory-oss
Enter fullscreen mode Exit fullscreen mode

In this example, I am installing the cart version is “107.90.8” and App Version is “7.90.8”

NAME                         CHART VERSION        APP VERSION        DESCRIPTION
jfrog/artifactory-oss        107.90.8             7.90.8             JFrog Artifactory OSS
Enter fullscreen mode Exit fullscreen mode

Create a Helm values YAML file named helm-value.yaml, which will be used to configure the JFrog Artifactory OSS service. This configuration file will be utilized by Helm to install the service in the cluster.

artifactory:
    postgresql:
    postgresqlPassword: postgres_password
    nginx:
    enabled: false
    ingress:
    enabled: false
Enter fullscreen mode Exit fullscreen mode

In the above configuration, I have configured the following points:

  • Helm is using the default PostgreSQL database, where I specified the database password.
  • NGINX and Ingress resources are disabled.

The following Helm command is used to install Artifactory in the cluster. It creates the necessary resources in the cluster, including a namespace called "artifactory-oss," and installs all resources within this namespace.

helm install artifactory-oss -f helm-value.yaml jfrog/artifactory-oss --namespace artifactory-oss --create-namespace
Enter fullscreen mode Exit fullscreen mode

Helm chart values: https://github.com/jfrog/charts/blob/master/stable/artifactory-oss/values.yaml

We can verify that all resources have been installed in the "artifactory-oss" namespace. The Artifactory service UI is running on port 8082, while Artifactory itself is operating on port 8081.

kubectl get -n artifactory-oss all

NAME                               READY   STATUS    RESTARTS   AGE
pod/artifactory-oss-0              0/7     Running   0          3m19s
pod/artifactory-oss-postgresql-0   1/1     Running   0          3m19s

NAME                                          TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)                      AGE
service/artifactory-oss                       ClusterIP   10.96.170.63   <none>        8082/TCP,8025/TCP,8081/TCP   3m19s
service/artifactory-oss-postgresql            ClusterIP   10.96.95.36    <none>        5432/TCP                     3m19s
service/artifactory-oss-postgresql-headless   ClusterIP   None           <none>        5432/TCP                     3m19s

NAME                                          READY   AGE
statefulset.apps/artifactory-oss              0/1     3m19s
statefulset.apps/artifactory-oss-postgresql   1/1     3m19s
Enter fullscreen mode Exit fullscreen mode

We need to create an Ingress resource to route requests to the Artifactory service. Add the following configuration to the ingress-resource.yaml file.

apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
    name: jfrog-ingress
    namespace: artifactory-oss
    annotations:
    nginx.ingress.kubernetes.io/proxy-body-size: "0"
spec:
    ingressClassName: nginx
    rules:
    - host: jfrog.artifactory.devops.myapp.com
        http:
        paths:
            - path: /
            pathType: ImplementationSpecific
            backend:
                service:
                name: artifactory-oss
                port:
                    number: 8082
Enter fullscreen mode Exit fullscreen mode

We need to configure proxy-body-size=0. This setting instructs the Ingress not to impose a limit on the file size when uploading files to Artifactory.

Execute the following command to apply the ingress in the cluster

kubectl apply -f ingress-resource.yaml
Enter fullscreen mode Exit fullscreen mode

Verify the IP address is set:

kubectl -n artifactory-oss get ingress

NAME            CLASS   HOSTS                                ADDRESS     PORTS   AGE
jfrog-ingress   nginx   jfrog.artifactory.devops.myapp.com   localhost   80      2m53s
Enter fullscreen mode Exit fullscreen mode

Add our domain to the bottom of the /etc/hosts file on your local machine. This configuration should not be inside our working Linux box “test-jfrog-envornment-box”; it should be applied to your personal machine's /etc/hosts file.
(you will need administrator access):

127.0.0.1 jfrog.artifactory.devops.myapp.com
Enter fullscreen mode Exit fullscreen mode

We can open the artifactory UI in the browser “http://jfrog.artifactory.devops.myapp.com/”

You can log in using the default username "admin" and password "password." Upon your first login, Artifactory will prompt you to change the default password. Be sure to update the password, set the base URL to http://jfrog.artifactory.devops.myapp.com (the domain configured in the Artifactory Ingress resource), and skip any other initial configuration steps.

We can create the initial repositories configurations to push the dependencies and binary in the artifactory.

Navigate to “Artifactory → Artifacts → Manage Repositories → Create Repository” and create the following repositories:

  • Local: This repository manages your application binaries. For example “my-app-snapshot”
  • Remote: This repository stores all dependencies used in your application, which will be downloaded from central repositories and stored in repository. For example “my-app-central-snapshot”
  • Virtual: This virtual repository provides a common endpoint that aggregates the “Local” and “Remote” repositories. This endpoint will be configured in your application. “my-app-virtual-snapshot”

I am using maven repository to maintain the repository. Following configuration we have to give “my-app-snapshot” local repository

Following configuration we have to give “my-app-central-snapshot” local repository

Following configuration we have to give “my-app-virtual-snapshot” local repository

Add the local and remote repositories to the virtual repository and select the local repository in the “Default Deployment Repository”.

Once all the repositories are created, you can view them in the main section under “Artifactory → Artifacts.” The virtual URL http://jfrog.artifactory.devops.myapp.com/artifactory/my-app-virtual-snapshot/ will be used for your Maven application.

We need to configure the authentication details in the Maven settings configuration file “~/.m2/settings.xml” to enable your Maven application to authenticate with Artifactory.

<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
            xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 https://maven.apache.org/xsd/settings-1.0.0.xsd">
    <servers>
        <server>
            <id>my-app-virtual-snapshot</id>
            <username>admin</username>
            <password>Give your artifactory admin passoword</password>
        </server>
    </servers>
</settings>
Enter fullscreen mode Exit fullscreen mode

Note: The admin user should not be used for UI and Artifactory access. Instead, create a custom user with appropriate permissions for reading and writing in Artifactory.

We have configure the maven repository and distribution management tags inside our maven application POM XML file

<distributionManagement>
    <repository>
        <uniqueVersion>false</uniqueVersion>
        <id>my-app-virtual-snapshot</id>
        <name>my-app-virtual-snapshot</name>
        <url>http://jfrog.artifactory.devops.myapp.com/artifactory/my-app-virtual-snapshot/</url>
        <layout>default</layout>
    </repository>
</distributionManagement>

<repositories>
    <repository>
        <id>my-app-virtual-snapshot</id>
        <name>my-app-virtual-snapshot</name>
        <url>http://jfrog.artifactory.devops.myapp.com/artifactory/my-app-virtual-snapshot/</url>
        <layout>default</layout>
    </repository>
</repositories>
Enter fullscreen mode Exit fullscreen mode

The we can deploy the maven application with following command

mvn clean deploy
Enter fullscreen mode Exit fullscreen mode

We can the following output of maven :

Refernece Git Repo

Top comments (0)

Read next

wittedtech-by-harshit profile image

The Ultimate Guide to Designing a Database That Works (Seriously, We Mean It)

Harshit Singh -

amandafonseca profile image

Priority Queue! Vamos destrinchar e aprender sobre essa parte de Estrutura de Dados.

Amanda Fonseca -

tusharops_29 profile image

Docker Networking – Basics, Network Types & Examples

Tushar Gayakwad -

programmerraja profile image

Sherlock Holmes: The Case Of Missing Cookies

Boopathi -