DEV Community

Cover image for Introduction to Service Workers in JavaScript
Atta
Atta

Posted on • Updated on • Originally published at attacomsian.com

Introduction to Service Workers in JavaScript

This post was originally published on attacomsian.com/blog.


Service workers are a core part of Progressive Web Apps that allow caching of resources and web push notifications, among other things, to create an effective offline experience. They act as a proxy between web applications, the browser, and the network, allowing developers to intercept and cache network requests and take appropriate action based on the availability of the network.

A service worker runs on a separate thread, so it is non-blocking. This also means that it does not have access to DOM and other APIs available in the main JavaScript thread like cookies, XHR, web storage APIs (local storage and session storage), etc. Since they are designed to be fully asynchronous, they heavily use promises to wait for responses of network requests.

Due to security concerns, service workers only run over HTTPS and cannot be used in private browsing mode. However, you do not need a secure connection while making location requests (good enough for testing).

Browser Support

The service worker is a relatively new API that is only supported by modern web browsers. Therefore, we first need to check if the API is supported by the browser:

if('serviceWorker' in navigator) {
    // Supported 😍
} else {
    // Not supported πŸ˜₯
}

Service Worker Registration

Before we start caching the resources or intercepting network requests, we must install a service worker in the browser. Since a service worker is essentially a JavaScript file, it can be registered by specifying the path of the file. The file must be accessible over the network and should only contain service worker code.

You should wait until the page is loaded, then pass the service worker file path to navigator.serviceWorker.register() method:

window.addEventListener('load', () => {
    if ('serviceWorker' in navigator) {
        // register service worker
        navigator.serviceWorker.register('/sw-worker.js').then(
            () => {
                console.log('SW registration succesful 😍');
            },
            err => {
                console.error('SW registration failed 😠', err)
            });
    } else {
        // Not supported πŸ˜₯
    }
});

You can run the above code every time a page loads without any trouble; the browser will decide if the service worker is already installed or not and handle it accordingly.

Service Worker Lifecycle

The registration lifecycle consists of three steps:

  1. Download
  2. Install
  3. Activate

When a user first visits your website, the service worker file is immediately downloaded and installation is attempted. If the installation is successful, the service worker is activated. Any functionality that's inside the service worker file is not made available until the user visits another page or refresh the current page.

Browser Events

Once the service worker is installed and activated, it can start intercepting network requests and caching resources. This can be done by listening to events emitted by the browser inside the service worker file. The browser emits the following events:

  • install is emitted when the service worker is being installed.
  • activate is sent when the service worker has been successfully registered and installed. This event can be used to remove outdated cache resources before installing a new version.
  • fetch is emitted whenever the web page requests a network resource. It can be anything: a new HTML document, an image, a JSON API, a stylesheet or JavaScript file, whatever that is available on a remote location.
  • push is sent by the Push API when a new push notification is received. You can use this event to display a notification to the user.
  • sync is invoked when the browser detects network availability after the connection was lost.

Serving Cached Resources

We can listen to install event when the service worker is installing to cache specific resources that would be need to serve the page when we are out of network:

const CACHE_NAME = 'site-name-cache';

self.addEventListener('install', event => {
    event.waitUntil(
        caches
            .open(CACHE_NAME)
            .then(cache =>
                cache.addAll([
                    'favicon.ico',
                    'projects.json',
                    'style.css',
                    'index.js',
                    'https://fonts.googleapis.com/css?family=Open+Sans:400,700'
                ])
            )
    );
});

The above example code uses the Cache API to store the resources in a cache named site-name-cache.

The self is a read-only global property that is used by the service workers to get access to themselves.

Now let us listen for a fetch event to check if the requested resource was already stored in the cache, and return it back if found:

// ...
self.addEventListener('fetch', event => {
    event.respondWith(
        caches.match(event.request).then(response => {
            if (response) {
                //found cached resource
                return response;
            }
            return fetch(event.request);
        })
    );
});

We look for a cache entry for the resource identified by the request property, and if not found, we make a fetch request to get it. If you want to cache new requests too, you can do it by handling the response of the fetch request and then adding it to the cache, like below:

//...
self.addEventListener('fetch', event => {
    event.respondWith(
        caches.match(event.request).then(response => {
            if (response) {
                //found cached resource
                return response;
            }

            // get resource and add it to cache
            return fetch(event.request)
                .then(response => {
                    // check if the response is valid
                    if (!response.ok) {
                        return response;
                    }

                    // clone the response
                    const newResponse = response.clone();

                    // add it to cache
                    caches.open(CACHE_NAME)
                        .then(cache =>
                            cache.put(event.request, newResponse)
                        );

                    // return response
                    return response;
                });
        })
    );
});

Service Worker Update

When the service worker is installed, it continues to run until it is removed by the user or updated. To update a service worker, all you need to do is upload a new version of the service worker file on the server. When the user visits your site, the browser will automatically detect the file changes (even just one byte is enough), and install the new version.

Just like the first time installation, the new service worker functionality will only be available when the user navigates to another page or refresh the current page.

On thing we can do is listen for activate event and remove the old cache resources. The following code does this by looping over all caches and deleting the cache that matches our cache name:

// ...
self.addEventListener('activate', event => {
    event.waitUntil(
        caches.keys().then(keys => {
            return Promise.all(
                keys.map(cache => {
                    if (cache === CACHE_NAME) {
                        return caches.delete(cache);
                    }
                })
            );
        })
    );
});

That's all for service workers introduction. If you want to learn more, check out ServiceWorker Cookbook β€” a collection of working, practical examples of using service workers in modern web sites.


✌️ I write about modern JavaScript, Node.js, Spring Boot, and all things web development. Subscribe to my newsletter to get web development tutorials & protips every week.


Like this article? Follow @attacomsian on Twitter. You can also follow me on LinkedIn and DEV.

Top comments (7)

Collapse
 
sidvishnoi profile image
Sid Vishnoi

Nice introduction!
To add, Service Workers are a lot powerful than just caching resources. Manipulating a response before it reaches the client is very powerful in itself.
Not sure if right place to share this, but I recently made a little tool that helps us in previewing a different version of our script (like from a PR) in live documents (W3C specifications to be precise).

Collapse
 
aybee5 profile image
Ibrahim Abdullahi Aliyu

If using this code creates the service workers do we actually need to learn how to use third party packages to use them? Something like workbox

Collapse
 
attacomsian profile image
Atta

I believe not. You don't need to learn or use any 3rd-party package to use service workers in JavaScript.

Collapse
 
aybee5 profile image
Ibrahim Abdullahi Aliyu

Thank you, I watched a playlist on service workers and at the end he introduced sw-toolbox, after I searched it I saw that it's depreciated, that workbox should be used, and I found that little overload. Thank you for the reply

Collapse
 
shimphillip profile image
Phillip Shim

I think you have a typo in your title :)

Collapse
 
attacomsian profile image
Atta

Oh my goodness! It was a terrible mistake πŸ˜ͺ Thank you for pointing out. I updated the title.

Collapse
 
anwar_nairi profile image
Anwar

Great introduction :)