DEV Community

Cover image for Bug Hunting with the MongoDB Haskell Community
Alex Bevilacqua
Alex Bevilacqua

Posted on • Originally published at alexbevi.com

Bug Hunting with the MongoDB Haskell Community

MongoDB currently maintains 10 programming language Drivers in-house, including a Ruby driver for which I'm presently the Product Manager. Additionally we also have a library of community maintained drivers, built using the MongoDB Driver specifications our engineers maintain and publish.

It was brought to my attention that one of these community drivers - the Haskell driver - was experiencing an issue whereby queries were no longer returning results from the MongoDB Atlas clusters their applications were connected to.

Though I've never worked with Haskell, before joining the team I worked in Technical Services providing support for customers experiencing problems with their applications via our drivers. This seemed like an interesting problem we could hopefully solve for our developer community so I'd like to share the diagnostic journey that lead us to the issue and ultimately enabled a resolution.

Overview

When Adrien first reported issue #131 on GitHub the initial assessment was that their application could successfully connect to a MongoDB Atlas cluster and write new content, but when trying to read those results back the result set was always empty. This had happened suddenly causing existing applications and workloads to break however no new code had been introduced which could potentially be the culprit.

As I'm unfamiliar with Haskell Adrien kindly provided a Dockerized reproduction I could use to test this issue against my own Atlas clusters. This reproduction would write 3 documents to a collection, then try to read 3 documents back. To begin testing I setup an M10 cluster and ran the tests a few times.

Failures:

  src/Lib.hs:101:33:
  1) Reads Ensures reads work
       expected: 3
        but got: 9
Enter fullscreen mode Exit fullscreen mode

Each time I ran the test it would fail, but the number of documents in the "Ensures reads work" that were received kept increasing. The cluster I was testing on was a dedicated cluster, however MongoDB Atlas also offers free and shared tier clusters so for completeness of testing I configured an M0 next and re-ran the tests.

Failures:

  src/Lib.hs:101:33:
  1) Reads Ensures reads work
       expected: 3
        but got: 0
Enter fullscreen mode Exit fullscreen mode

No matter how many times I ran the tests against my M0 (also tested M2 and M5) the results were always 0.

Just to make sure this wasn't a larger issue I tested with a script that uses the Ruby driver against an M0 cluster to verify the behavior didn't reproduce there:

require 'bundler/inline'

gemfile do
  source 'https://rubygems.org'
  gem 'mongo'
end

client = Mongo::Client.new('mongodb+srv://....mongodb.net/test')
collection = client[:foo]
collection.drop

puts "Found #{collection.find.to_a.length} documents"
# => Found 0 documents

collection.insert_many([].fill({ "bar": "baz" },0,3))
puts "Found #{collection.find.to_a.length} documents"
# => Found 3 documents
Enter fullscreen mode Exit fullscreen mode

The script would produce the expected result, which further pointed to a potential issue on the Atlas side that was specific to free and shared tier clusters.

MongoDB Atlas imposes some limitations on free and shared tier clusters, which in some cases are enforced by a proxy layer between the application and the underlying infrastructure backing the cluster.

Analysis

Now that the issue was narrowed down, working with a Cloud Operations Engineer to create an isolated M2 cluster in a development environment, we increased the log verbosity for that cluster for QUERY and COMMAND log components.

With this information, when we download logs for the node our test is targeting we should be able to get a lot more information as to what was being executed and where it might be failing.

// Test #1
{"t":{"$date":"2022-08-18T11:19:16.985+00:00"},"s":"D2", "c":"COMMAND",  "id":5578800, "ctx":"conn24194","msg":"Deprecated operation requested. The client driver may require an upgrade in order to ensure compatibility with future server versions. For more details see https://dochub.mongodb.org/core/legacy-opcode-compatibility","attr":{"op":"query","clientInfo":{"driver":{"name":"mongo-go-driver","version":"v1.7.2+prerelease"},"os":{"type":"linux","architecture":"arm64"},"platform":"go1.18.2","application":{"name":"Atlas Proxy v20220824.0.0.1660656950"}}}}
{"t":{"$date":"2022-08-18T11:19:16.986+00:00"},"s":"D2", "c":"QUERY",    "id":20914,   "ctx":"conn24194","msg":"Running query","attr":{"query":"ns: 62fe1f7d37518e1c32149694_haskell.test123 query: { comment: { AtlasProxyAppName: \"\", AtlasProxyClientMetadata: {} } } sort: {} projection: {}"}}
{"t":{"$date":"2022-08-18T11:19:16.986+00:00"},"s":"D5", "c":"QUERY",    "id":20917,   "ctx":"conn24194","msg":"Not caching executor but returning results","attr":{"numResults":0}}
Enter fullscreen mode Exit fullscreen mode

Based on log analysis we could not only verify the issue existed, but why it was affecting these operations from the Haskell driver:

A deprecated operation was being run

MongoDB uses a wire protocol when sending/receiving messages internally and externally (via Drivers). Initially a number of opcodes existed, but starting with MongoDB 5.0 most of these were deprecated in favor of OP_MSG.

Prior to MongoDB 3.6 when OP_MSG was introduced to subsume existing opcodes, query operations were executed via OP_QUERY, which the Haskell driver is apparently still using for query execution.

Note that though OP_QUERY is deprecated, it would still be supported in the version of MongoDB we were testing (5.0) and as such is not the cause of this problem.

The logs confirm no results are being returned by the query

At the default level, the Database Profiler will only output queries to the mongod logs if they exceed the slow query threshold (slowms) of 100ms. The tests we were running would likely have completed in under 10ms, which prevented anything useful from being logged.

{"t":{"$date":"2022-08-18T11:19:16.986+00:00"},"s":"D5", "c":"QUERY", "id":20917, "ctx":"conn24194","msg":"Not caching executor but returning results","attr":{"numResults":0}}

Once the log level was increased it was apparent that the operation in question was being executed, but was not returning any results.

The logs highlight an issue with the query itself

With the log level increased however the QUERY component logs showed clearly that not only were no results being returned, but the query shape that was being sent to the server didn't match what we expected:

{"t":{"$date":"2022-08-18T11:19:16.986+00:00"},"s":"D2", "c":"QUERY", "id":20914, "ctx":"conn24194","msg":"Running query","attr":{"query":"ns: 62fe1f7d37518e1c32149694_haskell.test123 query: { comment: { AtlasProxyAppName: \"\", AtlasProxyClientMetadata: {} } } sort: {} projection: {}"}}

It appeared that the query's filter - which we expected to be empty - was in fact filtering for comment: { AtlasProxyAppName: "", AtlasProxyClientMetadata: {} }. Since none of the sample documents that were being created as part of this test matched these criteria, the query returned 0 results.

Findings

From our log analysis it would appear our operations were being rewritten to append a filter criteria for a comment field with a value of { AtlasProxyAppName: "", AtlasProxyClientMetadata: {} }. As comment has a specific meaning within the context of MongoDB commands it was becoming apparent what the issue was and where it may have originated.

Starting with MongoDB 4.4, a comment option was added to all database commands (see SERVER-29794).
This was not be confused with the $comment meta operator that has been available since MongoDB 2.0 for propagating metadata to query logs.

The Atlas team introduced a feature (released 2022-06-22) that would utilize these comments to improve the currentOp output in free/shared clusters. As all "official" MongoDB Drivers communicate with modern MongoDB clusters using OP_MSG, when this feature was being tested there were no issues.

Unfortunately, drivers that still use OP_QUERY to make queries were negatively impacted as a result of the metadata comment injection occurring in the filter instead of one level above as is the case for OP_MSG.

Now that the issue could be verified, additional logic was introduced to use the $comment meta operator if an OP_QUERY was detected instead of improperly applying a comment option.

Outcome

With the assistance of the Haskell community we were able to identify and address a deficiency in the free and shared tiers of MongoDB Atlas. The fix for this was released in version 8ed75a4810@v20220914 on 2022-09-21, and any Haskell application using the community maintained Haskell driver should have started working as expected without the need for additional intervention.

We truly appreciate the investment our developer communities make when they put time and effort into building something as powerful as a MongoDB driver and want to ensure we do what we can to offer assistance if possible.

Top comments (2)

Collapse
 
sunitha profile image
Sunitha B

I'm facing the same issue. I've dockerized a mern stack application and since then i've been getting query results. Can you give some tips on how to solve the issue? Its really driving me crazy

Collapse
 
alexbevi profile image
Alex Bevilacqua

Hey @sunitha. The article here describes a specific challenge for a community-maintained Haskell driver, whereas a MERN stack application would likely be using either the Node driver, or Mongoose.

It might make more sense to post your question in the MongoDB developer community (mongodb.com/community/forums/) with some details such as the driver version in use, the specific configuration and details about your Dockerfile.