DEV Community

Cover image for How to setup and configure TURN server using coTURN?
alakkadshaw
alakkadshaw

Posted on • Originally published at metered.ca

How to setup and configure TURN server using coTURN?

#webdev #javascript #webrtc #programming

Turn server is required to relay traffic between peers when a direct connection cannot be established between them.

WebRTC requires a direct connection between peers, but many times a direct connection cannot be established and a TURN server is required.

In this article, we will explain how you can run your own turn server using open source TURN server implementation that is coturn.

We will also provide alternative to coturn that is using a free turn server that is production ready and is supplied by the OpenRelayProject.Org

  • What is coturn?
  • What is Open Relay Project?
  • Prerequisites for setting up Coturn
  • Step 1 : Installing Coturn
  • Step 2: Configuring CoTURN
  • Step 3: Testing the TURN Server
  • Step 4 : Setting a domain name to your turn server (Optional)
  • Step 5: Encryption the COTURN server using lets encrypt (Optional)
  • Step 6: Running Coturn on docker container (Optional)
  • Conclusion

What is COTURN?

COTURN is a free and open source implementation of TURN and STUN server. Coturn can be easily be downloaded from its website here: https://github.com/coturn/coturn

Coturn acts as a TURN as well a STUN server as stated above and can be easily installed on cloud services like aws, google cloud, digital ocean and others.

Coturn can also be installed as a docker container.

There are some costs associated with running your own turn server these are

  1. Server costs (AWS, Google Cloud etc)
  2. Bandwidth costs (AWS, Google Cloud etc)
  3. Time and effort to set up Co turn

What is Metered TURN Server ?

Metered TURN is a global TURN server service provider.

Some of the features of Metered TURN server are as follows

  • Standards Compliant
  • Cost Effective
  • 99.999% Uptime
  • Dynamic Routing to the nearest server
  • Enterprise Scalability

You can create an account on Metered website and get 50GB of Free TURN usage every month

Prerequisites for setting up coturn

  1. A linux server with a public IP address (aws, google cloud or any other)
  2. A Custom domain Name (Optional)
  3. Docker installation (Optional)

Step 1 Installing Coturn

Coturn is a open source STUN and TURN server implementation that can be used for NAT traversal and a general purpose network traffic TURN server and gateway

In this section we will install Coturn to your linux machine and enable the process,

First, Update the OS repo versions to the latest by running

sudo apt-get update
Enter fullscreen mode Exit fullscreen mode

then to install coturn

sudo apt-get install coturn
Enter fullscreen mode Exit fullscreen mode

If you want the Coturn to start automatically whenever you turn on the server.
Follow the below steps:

  1. go to file /etc/default/coturn 
sudo nano /etc/default/coturn
Enter fullscreen mode Exit fullscreen mode

or

sudo vim /etc/default/coturn
Enter fullscreen mode Exit fullscreen mode

Open the file and find the line

TURNSERVER_ENABLED=1
Enter fullscreen mode Exit fullscreen mode

uncomment it and save the file. Now, start the coturn server

systemctl start coturn
Enter fullscreen mode Exit fullscreen mode

Step 2 Configuring Coturn

Let us now set up some basic configuration settings like adding

  • external IP address and
  • adding basic auth

Before modifying the configuration file it is recommended to make a copy of the original configuration file if we need in the future

mv /etc/turnserver.conf /etc/turnserver.conf.original
Enter fullscreen mode Exit fullscreen mode

This will rename the original file name from turnserver.conf to turnserver.conf.original

Next replace the Coturn server realm and server name.

# TURN server name and realm
realm=<DOMAIN>
server-name=<SERVER_NAME>
Enter fullscreen mode Exit fullscreen mode

What is realm?

It is a "key" to access a group of address that have a common "owner". A TURN server can have one "default realms" or more "named realms" in its database. And any realm has its own users and each of them have a proper login/password couple to identify access and working sessions.

If we do not edit this file it will use the default realm value. We can have a general realm where all users connect

next let us set up the TURN servers external IP and the listening IP. External IP is the IP that the TURN server is assigned (this you will get from the aws or any other cloud provider that you are using).

Listening IP is the is that the TURN server will listen to. If you want the TURN server to listen to all IP Addresses set the listening IP to 0.0.0.0

# IPs the TURN server will listen to 
listening-ip=0.0.0.0

#external-ip=IP_ADDRESS
Enter fullscreen mode Exit fullscreen mode

Next we will define the ports that the server will listen to and other ports for that are open for communication.

# Main listening Port
listening-port=4001

# External IP-Address of your TURN server
external-ip=IP-Address
Enter fullscreen mode Exit fullscreen mode

Next we need the port that our Coturn server will listen to

# Main listining port 
listening-port=3478

#and for TLS (secure)
tls-listening-port=5349

#Further ports open for communication
min-port=10000
max-port=20000
Enter fullscreen mode Exit fullscreen mode

Running coTURN on privileged ports

Some Linux distributions for example Ubuntu 20 LTS release and later run coTURN service as an unprivileged user like turnserver.

For this reason coturn by default cannot use privileged ports like port 443.

But, Linux configuration can be altered to overcome this limitation. Capabilitites can be associated with executable files using setcap, so you could allow the usr/bin/turnserver executable to bind sockets to privileged ports like

setcap cap_net_bind_service=+ep /usr/bin/turnserver
Enter fullscreen mode Exit fullscreen mode

Alternatively you can configure coturn service to be executed by root like a SSL certificate for TLS connections by

systemctl edit coturn
Enter fullscreen mode Exit fullscreen mode

and set the following configuration

[Service]
User=root
Group=root
Enter fullscreen mode Exit fullscreen mode

You need the following ports open to run the coturn server.

Ports Protocol Description
3478 TCP/UDP coturn listening port
443 TCP/UDP TLS listening port

Now we can also enable verbose logging mode to get a clearer idea of what's going on behind the wraps

# Use fingerprint in TURN messages
fingerprint

# log the file
log-file=/var/log/turnserver.log

#enable verbose logging
verbose
Enter fullscreen mode Exit fullscreen mode

Lastly lets enable auth for Turn server using user and It-cred-mech keys

# Specify the user for the turn authentication
user=turnuser:turnuser456

# Enable long term credential mechanism
It-cred-mech
Enter fullscreen mode Exit fullscreen mode

final file will look something like this:

# TURN server name and realm
realm=DOMAIN
server-name=turnserver

# Use fingerprint in TURN message
fingerprint

# IPs the TURN server listens to
listening-ip=0.0.0.0

# External IP-Address of the TURN server
external-ip=IP_ADDRESS

# Main listening port
listening-port=3478

# Further ports that are open for communication
min-port=10000
max-port=20000

# Log file path
log-file=/var/log/turnserver.log

# Enable verbose logging
verbose

# Specify the user for the TURN authentification
user=turnuser:turn456

# Enable long-term credential mechanism
lt-cred-mech

# If running coturn version older than 4.5.2, uncomment these rules and ensure
# that you have listening-ip set to ipv4 addresses only.
# Prevent Loopback bypass https://github.com/coturn/coturn/security/advisories/GHSA-6g6j-r9rf-cm7p
#denied-peer-ip=0.0.0.0-0.255.255.255
#denied-peer-ip=127.0.0.0-127.255.255.255
#denied-peer-ip=::1
Enter fullscreen mode Exit fullscreen mode

After finishing the configuration restart the server using

sudo service coturn restart
Enter fullscreen mode Exit fullscreen mode

Configure log rotation

To rotate logs install the following configuration file to

/etc/logrotate.d/coturn
Enter fullscreen mode Exit fullscreen mode 
/var/log/turnserver/*.log
{
    rotate 7
    daily
    missingok
    notifempty
    compress
    postrotate
        /bin/systemctl kill -s HUP coturn.service
    endscript
}
Enter fullscreen mode Exit fullscreen mode

and the associated directory:

$ sudo mkdir -p /var/log/turnserver
$ sudo chown turnserver:turnserver /var/log/turnserver
Enter fullscreen mode Exit fullscreen mode

restart the coturn server

$ sudo systemctl daemon-reload           # Ensure the override file is loaded
$ sudo systemctl restart coturn          # Restart
Enter fullscreen mode Exit fullscreen mode

Step 3 Testing the TURN server

There are three methods of testing the TURN server

  • Trickle ICE
  • ICE Test
  • Using Javascript

Trickle ICE
go to the website at: https://webrtc.github.io/samples/src/content/peerconnection/trickle-ice/

add your credentials and click on the add server button to add your TURN server

Metered TURN server

Then click on the "Gather Candidates" button to run the test

Metered TURN server

ICE Test

Go to the ICE test website: https://icetest.info/ and enter your turn server credentials to test the TURN server

Image description

Using Firefox

Using firefox you can test your coturn server. You can disable direct connections in Firefox and require fallback to TURN server.

Start Firefox and open

about:config
Enter fullscreen mode Exit fullscreen mode

and search for relay. You will see a parameter

media.peerconnection.ice.relay_only #set this value to true
Enter fullscreen mode Exit fullscreen mode

This configures Firefox to use only the Turn server. Now try to run your service.

Open the

about:webrtc
Enter fullscreen mode Exit fullscreen mode

Click on the show details to see the ICE stats. A successful connection will have

(relay-tcp)
Enter fullscreen mode Exit fullscreen mode

at the top of the stack in the Local Candidate column

If the connection fails then you have:

WebRTC: ICE failed, your TURN server appears to be broken, see about:webrtc for more details
Enter fullscreen mode Exit fullscreen mode

You can check the coturn is running on your turn server by

systemctl status coturn.service
Enter fullscreen mode Exit fullscreen mode

check logs using

tail -f /var/log/turnserver/coturn.lo
Enter fullscreen mode Exit fullscreen mode

Step 4 : Setting a domain name to your turn server (Optional)

you can set up a domain name to your Turn server. To do this you will need your DNS records.

Go to your Domain name registrar and create the DNS records. Domain name registrar is the website where you purchased your domain name from.

and add the DNS record and wait until they are found by the service.

Step 5: Encryption the COTURN server using lets encrypt (optional)

We can use certbot from Let's Encrypt to easily generate free TLS cetificate.

Enter the following commands on your TURN server:

$ sudo add-apt-repository ppa:certbot/certbot
$ sudo apt-get update
$ sudo apt-get install certbot
Enter fullscreen mode Exit fullscreen mode

You can then run a certbot command like the following to generate the certificate, replacing <turn.example.com> with the domain name of your TURN server like

$ sudo certbot certonly --standalone --preferred-challenges http \
    -d <turn.example.com>
Enter fullscreen mode Exit fullscreen mode

Be aware that the TCP port 80 needs to be temporarily open to allow that to happen.

Current versions of the certbot command set up automatic renewal by default.

To ensure that the certificates are readable by the coturn which in turn runs the service turnserver lets add a renewable hook to the let's Encrypt.

First let us create a directory

$ sudo mkdir -p /etc/letsencrypt/renewal-hooks/deploy
Enter fullscreen mode Exit fullscreen mode

with the following contents. Replace with the hostname of your TURN server

#!/bin/bash -e
for certfile in fullchain.pem privkey.pem ; do
    cp -L /etc/letsencrypt/live/<turn.example.com>/"${certfile}" /etc/turnserver/"${certfile}".new
    chown turnserver:turnserver /etc/turnserver/"${certfile}".new
    mv /etc/turnserver/"${certfile}".new /etc/turnserver/"${certfile}"
done
systemctl kill -sUSR2 coturn.service
Enter fullscreen mode Exit fullscreen mode

Make this file executable

$ sudo chmod 0755 /etc/letsencrypt/renewal-hooks/deploy/coturn
Enter fullscreen mode Exit fullscreen mode

and that's it we have added the encryption to the TURN server

Step 6 Optional Running COTURN in Docker

If you want to run coturn in docker instead of running it directly on the server. type the following command to start the server

docker run -d -p 3478:3478 -p 3478:3478/udp -p 5349:5349 -p 5349:5349/udp -p 49152-65535:49152-65535/udp coturn/coturn
Enter fullscreen mode Exit fullscreen mode

then

docker run -d --network=host coturn/coturn
Enter fullscreen mode Exit fullscreen mode

The default Coturn configuration and CLI options provided in the CMD Dockerfile instruction are used

  1. You can specify your own configuration file like 
docker run -d --network=host \
           -v $(pwd)/my.conf:/etc/coturn/turnserver.conf \
       coturn/coturn
Enter fullscreen mode Exit fullscreen mode
  1. Specify command line options directly 
docker run -d --network=host coturn/coturn \
           -n --log-file=stdout \
           --min-port=49160 --max-port=49200 \
           --lt-cred-mech --fingerprint \
           --no-multicast-peers --no-cli \
           --no-tlsv1 --no-tlsv1_1 \
           --realm=my.realm.org \
Enter fullscreen mode Exit fullscreen mode
  1. Even specify another config file like 
docker run -d --network=host  \
           -v $(pwd)/my.conf:/my/coturn.conf \
       coturn/coturn -c /my/coturn.conf
Enter fullscreen mode Exit fullscreen mode

Automatic detection of external IP

detect-external-ip

binary may be used to automatically detect the externalip of TURN server in runtime. It is okay to use it multiple times as the value will be evaluated only once

docker run -d --network=host coturn/coturn \
           -n --log-file=stdout \
           --external-ip='$(detect-external-ip)' \
           --relay-ip='$(detect-external-ip)'
Enter fullscreen mode Exit fullscreen mode

Persistence

By default the docker image persists the data in

/var/lib/coturn
Enter fullscreen mode Exit fullscreen mode

directory. You can speed up Coturn simply by using tmfs for that

docker run -d --network=host --mount type=tmpfs,destination=/var/lib/coturn coturn/coturn
Enter fullscreen mode Exit fullscreen mode

Conclusion

In this article I have explained how you can set up and run your own TURN server using the open source COTURN project.

You can also use the Public TURN server provided by the OpenRelayProject.Org and save yourself time, effort and cost by using a publicly available free turn server

If you have any questions with regards to setting up the coturn server in your project, please comment in the comment section below and I will reply as soon as possible

Top comments (1)

Collapse
 
alakkadshaw profile image
alakkadshaw •

I hope you liked the article and thank you for reading
If you are looking for a TURN server you can consider the following :

  1. Paid Option: Metered TURN Server
  2. Free Option: Open Relay Project

Read next

araldhafeeri profile image

Designing and Implementing Ant Design Global App Tour for React Apps.

Ahmed Rakan -

dsychin profile image

Lessons Learned Migrating from React CRA & Jest to Vite & Vitest

Desmond Chin -

prince_beec5ccde00b7c6c73 profile image

👻 Scary Ghost Cursor with Smoke Trail! 💀 code using html5,css3 and javascript

Prince -

shams_arman_510 profile image

BLA ! BLA! BLA! DECEMBER...!

shams Arman siddique -