DEV Community

Aerospike profile image robertglonek
robertglonek for Aerospike

Posted on • Edited on • Originally published at developer.aerospike.com

Creating Aerospike test clusters with AeroLab in AWS

#aerolab #aws #cluster #create

Lab is fun

AeroLab simplifies the process of installing Aerospike clusters and clients for development, testing, and lab use on either Docker or in AWS. A rich feature set simulates network faults, quickly inserts and updates test data, partitions disks, and more.

We will setup the following stack:

  1. Cluster - six nodes across two racks in two availability zones
  2. Monitoring - Prometheus Exporter on the cluster nodes and an Aerospike Monitoring Stack instance
  3. Clients - Aerospike tools instances where I will run asbench - a benchmark tool
  4. Custom client - a Virtual Studio Code instance where I can develop my own code to interact with the database

Install AeroLab

  1. Download AeroLab from here, then we choose the backend type to be AWS and pick our region: 
aerolab config backend -t aws -r us-west-1
Enter fullscreen mode Exit fullscreen mode

  1. Install AWS CLI with the instructions in this manual. (Ignore this if you already have it installed.)

  2. Because we are using the Enterprise Edition of Aerospike, we configure AeroLab to always use the feature key file for all relevant commands in the future:

aerolab config defaults -k '*FeaturesFilePath' -v /path/to/features.conf
Enter fullscreen mode Exit fullscreen mode

Create security groups

For safety, let's instruct AeroLab to create security group firewall rules, and protect them so that only our IP address can access the instances we create.

aerolab config aws create-security-groups
aerolab config aws lock-security-groups
Enter fullscreen mode Exit fullscreen mode

Deploy the cluster

  1. We deploy a 3-node cluster, preconfigured to already form correctly, using r5ad.4xlarge instances with NVMe disks in us-west-1a. We do not want the nodes to start at this point. 
aerolab cluster create -c 3 -n mycluster -I r5ad.4xlarge -U us-west-1a -s n
Enter fullscreen mode Exit fullscreen mode
  1. Add three more nodes, this time in another availability zone. 
aerolab cluster grow -c 3 -n mycluster -I r5ad.4xlarge -U us-west-1b -s n
Enter fullscreen mode Exit fullscreen mode
  1. Instruct AeroLab to change the rack configuration on the nodes. 
aerolab conf rackid -n mycluster -l 1-3 --id=1 -e
aerolab conf rackid -n mycluster -l 4-6 --id=2 -e
Enter fullscreen mode Exit fullscreen mode
  1. We want to use the test namespace, but we want to use all NVMe disks for that namespace as well. Let's create four partitions on each NVMe as well. Time to prepare the disks and configure Aerospike on all nodes: 
aerolab cluster partition create -n mycluster --filter-type=nvme -p 25,25,25,25
aerolab cluster partition conf -n mycluster --namespace=test --filter-type=nvme --configure=device
Enter fullscreen mode Exit fullscreen mode
  1. It is time to start Aerospike on all the nodes and check the logs on one of the nodes, specifically looking for a successful startup and the CLUSTER-SIZE correctly showing six nodes. 
aerolab aerospike start -n mycluster
aerolab logs show -n mycluster --journal --follow --node=6
Enter fullscreen mode Exit fullscreen mode

To verify, we query for basic cluster information using the asadm command on one of the nodes:

aerolab attach shell -n mycluster -- asadm -e info
Enter fullscreen mode Exit fullscreen mode

Install the monitoring stack

  1. Add the Prometheus Exporter to all the nodes to query Aerospike and gather the metrics. 
aerolab cluster add exporter -n mycluster
Enter fullscreen mode Exit fullscreen mode
  1. Deploy a special client machine with Prometheus database and Grafana preinstalled for Aerospike monitoring: 
aerolab client create ams -n mymonitor -s mycluster -I r5a.xlarge -U us-west-1a
Enter fullscreen mode Exit fullscreen mode
  1. To access the Grafana dashboards on the monitoring stack, list the client machines: 
aerolab client list
Enter fullscreen mode Exit fullscreen mode
  1. Navigate in your browser to the node's IP on port 3000. For example: http://127.0.0.1:3000

Clients and client benchmark monitoring

  1. Start some client machines with Aerospike Tools packages preinstalled. 
aerolab client create tools -n myclients -c 5 -I r5a.xlarge -U us-west-1a
Enter fullscreen mode Exit fullscreen mode
  1. Add asbenchmark monitoring to the monitoring stack, to populate the client graphs. 
aerolab client configure tools -l all -n myclients --ams mymonitor
Enter fullscreen mode Exit fullscreen mode

Generating the load

  1. Run the following asbench command to insert data. 
asbench -h ${NODEIP}:3000 -U superman -Pkrypton -n test -s \$(hostname) --latency -b testbin -K 0 -k 1000000 -z 16 -t 0 -o I1 -w I --socket-timeout 200 --timeout 1000 -B allowReplica --max-retries 2
Enter fullscreen mode Exit fullscreen mode
  1. Use the following command to run a read-update load. 
asbench -h ${NODEIP}:3000 -U superman -Pkrypton -n test -s \$(hostname) --latency -b testbin -K 0 -k 1000000 -z 16 -t 86400 -g 1000 -o I1 -w RU,80 --socket-timeout 200 --timeout 1000 -B allowReplica --max-retries 2
Enter fullscreen mode Exit fullscreen mode
  1. Instruct AeroLab to run all the commands on all the client tools instances. First, get the IP addresses. 
NODEIP=$(aerolab cluster list -j |grep -A7 mycluster |grep IpAddress |head -1 |egrep -o '([0-9]{1,3}\.){3}[0-9]{1,3}')
echo "Seed: ${NODEIP}"
Enter fullscreen mode Exit fullscreen mode
  1. Use the following commands to run asbench. 
aerolab client attach -n myclients -l all --detach -- /bin/bash -c "run_asbench -h ${NODEIP}:3000 -U superman -Pkrypton -n test -s \$(hostname) --latency -b testbin -K 0 -k 1000000 -z 16 -t 0 -o I1 -w I --socket-timeout 200 --timeout 1000 -B allowReplica --max-retries 2"
Enter fullscreen mode Exit fullscreen mode 
aerolab client attach -n myclients -l all --detach -- /bin/bash -c "run_asbench -h ${NODEIP}:3000 -U superman -Pkrypton -n test -s \$(hostname) --latency -b testbin -K 0 -k 1000000 -z 16 -t 86400 -g 1000 -o I1 -w RU,80 --socket-timeout 200 --timeout 1000 -B allowReplica --max-retries 2"
Enter fullscreen mode Exit fullscreen mode

Custom client

Use the following command to create an instance with vscode preinstalled with c#,java,python,golang libraries already configured for development.

aerolab client create vscode -n vscode -I r5a.medium
Enter fullscreen mode Exit fullscreen mode

Use aerolab client list to get the client list and display the IP addresses. To connect to the full IDE, open the vscode client IP port 8080 in your browser. For example: http://1.2.3.4:8080.

Summary

AeroLab simplifies the deployment of a custom-configured Aerospike cluster with test clients, a test load and a monitoring stack. Many more features exist to ease further configuration and installation. To view a list of commands, AeroLab has a useful help parameter that can be appended anywhere, for example:

aerolab help
aerolab cluster help
aerolab cluster create help
Enter fullscreen mode Exit fullscreen mode

Top comments (0)

Read next

michael_flanagan_red profile image

Building the Backbone: Entities Part 2, Agent

Michael Flanagan -

r0mymendez profile image

Diagram-as-Code: Creating Dynamic and Interactive Documentation for Visual Content

Romina Mendez -

iamsherif profile image

Schema Validation in Amazon DynamoDB

iAmSherif 💎 -

imsushant12 profile image

Deployment of a Node.js Application on AWS

Sushant Gaurav -