What is Currying?
Namc γ»6 min read
Original article published at : https://namc.in/20180222currying
Inspiration
This post is written after I saw a tweet which read
Every functional programming tutorial:
OK, we're going to talk about currying. Currying is when you break down a function tha
scrolls down
const Y = f => (g => g(g))(g => f(x => g(g)(x)))
And realized that we need a simpler tutorial to understand currying, the logic behind it, the nuances and the usage.
We will be using Haskell for this tutorial, but this can be extended to any functional programming language.
Higherorder functions!
In mathematics, higherorder functions (HOFs) are called functionals. But to simplify it for general software engineers, HOF is simply a functions that
 either takes a function as an argument
 or returns a function as a result
A wellknown higher order function is map, which performs an action on each element in a collection, e.g.:
 Haskell
map (\x > 2 * x) [1, 2, 3, 4, 5]  => [2, 4, 6, 8, 10]
In usual imperative programming, functions can accept values, like integers and strings (first order functions) and return a value of some other type.
Consider a function, f
such that 
f a b c = a + b  c
What if we wanted to generalize the operators in above function? That would make our operators a variable too. Right? Let's see a way to define a more generalized version of f
, where g
and h
represent the operatorfunctions.
let f g h a b c = a `g` b `h` c
> f (+) () 2 3 4  returns 1
> f (*) (/) 2 3 4  returns 1.5
That was simple! But, we mentioned that HOFs can return a function too. Yes, we can create a function that accepts a function and an argument and returns another function, which accepts an argument and returns a result. For example :
let g f n = (\m > m `f` n)
> f = g (+) 2
> f 10  returns 12
> f = g (*) 2
> f 10  returns 20
In the above example, (\m > m
fn)
construct is an anonymous function of 1 argument m
which applies f
to m
and n
. And using this anonymous functions, we can define g h 2
which is a function that accepts one argument g
and operates h
to it.
Trivia : Scheme, according to Wikipedia, was the first language to introduce proper higherorder functions as firstclass citizens, however the first mention dates back to Frege in "Funktion und Begriff" (1891).
Currying
Currying is a technique that transforms a function of several arguments to a function of a single argument, which returns a function of 1 argument, which returns a functions of 1 argument ... till it returns a value.
A curried function is one that returns a function as its result. A fully curried function is a oneargument function that either returns an ordinary result or returns a fully curried function.
Note that a curried function is necessarily a higherorder function, since it returns a function as its result.
Let's take an example, where we have a function of two args, like (+). But what if you could define the same function, by giving only one argument to it, thereby returning a function, which you could use later to add thid 1st argument, now encased in this new function, to something else.
f n = (\m > n + m)
> g = f 10
> g 8  would return 18
> g 4  would return 14
Same can be written in javascript like :
function add (a) {
return function (b) {
return a + b;
}
}
add(3)(4)
How could be make it more abstract? Lets define curry
, which takes a function and an argument, such that
curry f n = \m > f n m
g = curry (+) 5
> g 10  returns 15
h = curry (*) 5
> g 10  returns 50
If we check the type :t
of curry
function defined above, we find,
curry :: (a > b > c) > a > (b > c)
Haskell functions
Haskell curries all functions by default. There are no functions of multiple arguments in Haskell. What you have are only functions of one argument, some of which may return new functions of one arguments. So you can define a multiargument function as you would in any other language and you automatically get a curried version of it, without having to write lamdas yourself.
For example, take the function (++)
which concatenates two strings together.
:t (++)
(++) :: [a] > [a] > [a]
The type definition can be understood as, (++)
accepts one list, and returns a function of type [a] > [a]
. The resultant function can accept yet another list, and we get a new list of type [a]
.
If you are familiar with other languages, you can correlate f a b c
as Lisp's (((f a) b) c)
or Java's f(a, b, c)
. This makes sense as , in Haskell, the function f
is curried by default.
However, when you're analyzing types, the association is from right to left, so [a] > [a] > [a]
is equivalent to [a] > ([a] > [a])
, which means that when you apply an argument to the function, you get back a function of type [a] > [a]
.
Similiary, you can analyze map
, which accepts a function (a > b)
and a list [a]
, and returns a transformed list [b]
, such that function is mapped over all elements of [a]
.
:t map
map :: (a > b) > [a] > [b]
Try the following snippet out in ghci
(*)
(*) 5
(*) 5 10
map
map (\x > head x)
map (\x > head x) ["hello", "haskell", "kitty"]
map head
map head ["hello", "haskell", "kitty"]
Partial application
Partial application is when you call a function with 1 or multiple arguments to get back a function that still accepts arguments. This allows us to write shorter and concise code.
Partial application can be used as a substitute for anonymous functions. Let's look at some examples.
(\x > take 2 x)
 can be written as
(take 2)
What if you want to use an operator, say (+)
instead of take
? For infix functions, you can partially apply it using sections.
(\x > 2 + x)
 can be written as
(2+)
 and
(\x > x + 2)
 can be written as
(+2)
In place of (+)
, you can use any binary function to define sections.
(\xs > 2 elem' xs)
 can be written as
(2elem')
The point to note here is , since every function is curried by default, and accepts one argument only, so sections can be used with any function. For example ,
let f a b c d = a + b + c
 such that f is (+)
> (2f) 3 4 5  returns 14
Currying and Pattern Matching
We take for granted that we can have nested patterns and patterns over more than one term, when in reality for the purposes of a compiler the only thing you can do is branch on the toplevel constructor of a single value. So the first stage of the compiler is to turn nested patterns (and patterns over more than one value) into simpler patterns.
Let's take an example, a naive algorithm might transform your function into something like this:
myFunc = \x y > case x of
0 > case y of
0 > 0
_ > x `some_operation` y
1 > case y of
1 > 1
_ > x `some_operation` y
_ > x `some_operation` y
As we can see, there are a lot of caveats in the above implementation.
 the
some_operation
term is repeated a lot  the function expects both arguments before it will even start to do a case at all
Refer to A Term PatternMatch Compiler Inspired by Finite Automata Theory for further discussions on how we can improve it.
Anyway, in the form below, it should actually be a bit more clear how the currying step happens. We can directly substitute for x
in this expression to look at what myFunc 0
does:
myFunc 0 = \y > case 0 of
0 > case y of
0 > 0
_ > 0 `some_operation` y
1 > case y of
1 > 1
_ > 0 `some_operation` y
_ > 0 `some_operation` y
Now this is still a lambda, so no further reduction is done.
We will need to change the definition of our function if we want GHC to do more computation after supplying only one argument. There's a time/space tradeoff here. So GHC leaves it in the programmer's hands to make this choice. For example, you could explicitly write
myFunc 0 = \y > case y of
0 > 0
_ > 0 `some_operation` y
myFunc 1 = \y > case y of
1 > 1
_ > 1 `some_operation` y
myFunc x = \y > x `some_operation` y
and then myFunc 0
would reduce to a much smaller expression.
Compositions
Compositions and Application operator are very handy for writing concise and flexible code.

Composition operator
(.)
chains functions together. 
Application operator
($)
applies function on the left side to the argument on the right side
f $ x
is equivalent to f x
. However ($)
has the lowest precedence of all operators, so we can use it to get rid of parentheses: f (g x y)
is equivalent to f $ g x y
.
It is also helpful when we need to apply multiple functions to the same argument:
map ($2) [(2+), (10), (20/)]
 would yield
[4,8,10]
The following expressions are all equivalent
f (g (h (x + y + z)))  1
(f . g . h) (x + y + z)  2
f $ g $ h $ x + y + z  3
f . g . h $ x + y + z  4
(.)
and ($)
are different things. More can be read about that here  Learn you a haskell ($)
I'm unclear on the Lisp snippet you give in the paragraph starting "If you are familiar with other languages..." It looks based on context ("Java's
f(a, b, c)
") like you're trying to show calling the functionf
with the argumentsa
,b
andc
, which would traditionally look likeYour existing Lisp snippet,
(((f a) b) c)
is how one would call a curried function of 3 arguments in Lisp, which translates to Java asf(a)(b)(c)
(I think. Does Java even do anonymous functions? That's how it would look in C++, Javascript, etc., at least).Great article.
On the function:
curry f n = \m > f n m
g = curry (+) 5
h = curry (*) 5
The last line should be:
Can someone make a Javascript version of this? I've been trying to find a convincing example and explanation of currying for a while now.
what a way to program !!