DEV Community

Cover image for Vim — A Quick Beginner’s Guide
5 Mins Learn
5 Mins Learn

Posted on • Originally published at gogosoon.com

Vim — A Quick Beginner’s Guide

Vim is one of the most popular text editors among Linux users. Linux System Administrators prefer to use it more than Linux users. In this article, let’s explore a short history of vim and as a developer how you can quickly get your hands on vim.

What history says?

Vim is an acronym for Vi IM proved. It is a free and open-source cross-platform text editor. It was first released by Bram Moolenaar in 1991 for UNIX variants. Vim is based on the original Vi editor, which was created by Bill Joy in 1976. Around 90’s Vi was lacking behind in some features when compared with Emacs editor. So Bram implemented many missing features and released it with the name vim.

Installation

As I said earlier, Vim runs across platforms such as Windows, Linux, Mac, etc.

To install on Windows, download the executable file from the Vim site and run the file. Follow the instructions shown on the screen and you’ll be good to go.

Vim comes pre-installed on most *nix operating systems. But if it’s installed on your system, you can install it with a package manager of your choice.

Adding the installation command for Debian-based operating systems.

sudo apt-get update 
sudo apt-get install vim
Enter fullscreen mode Exit fullscreen mode

To ensure that it’s installed properly, run which vim and you should get /usr/bin/vim in your output.

Getting Started with Vim

You can get started with Vim by typing its name on the terminal.

Start Vim

Once you enter the above command, you’ll be able to see a screen displaying info about Vim and some instruction to find help and exit from Vim.

Vim Introduction

Vim Modes

You should be aware of the most important concept in Vim, before moving on further. That’s modes on Vim.

Everything in Vim is considered a mode. You can achieve whatever you want if you master the modes in Vim. There are many modes in Vim. But, we’ll be looking at the top 4 most important modes.

They are,

  1. Command Mode

  2. Command-Line Mode

  3. Insert Mode

  4. Visual Mode

Let’s explore them one by one.

Command Mode

This is the default mode (also called Normal mode) in Vim. Whenever Vim starts, you’ll be left in this mode. You’ll be able to switch to any mode from this mode. You cannot achieve this on any other modes. Basically, to switch from one mode to another, you have to come to Command Mode first and then navigate to the other mode. The commands that you run without any prefix (colon) indicate that you’re running the command in command mode.

Insert Mode

This mode is used to edit the contents of the file. You can switch to insert mode by pressing i from the command mode. You can use Esc key to switch back to command mode.

Command Line Mode

This mode is also used to play with some commands. But the commands in this mode are prefixed with a colon (:). You can switch to this mode by pressing : (colon) in command mode.

Visual Mode

This mode is used to visually select some text and run commands over that section of code. You can switch to this mode by pressing v from the command mode.

The above 4 modes are enough to do some set of file operations in Vim. Theories are done. Let’s explore Vim practically.

Typical Text Editor Operations

Create a new file

Creating a new file with Vim is so simple. You can do that from the command line mode.

Run the following command to create a new file

:edit sample.txt
Enter fullscreen mode Exit fullscreen mode

The above command opens sample.txt file in edit mode if it exists, creates a new file otherwise.

Create a new file with the sample.txt

After running that command, you’ll be in command mode (as shown in below screenshot), and you’ll not be able to enter any text

Command mode showing new file created

To add some text to the created file, press i in the keyboard. i command is used to enter some text in the file. Once you press i, you'll be able to see that you entered the Insert mode of Vim by looking at the bottom left of the file.

Insert mode in sample.txt file in Vim

In this mode, you can type whatever you want into the file.

We’re done with writing the content. We want to save the file now. If you do not save and just close the terminal at this point, all your contents will be lost.

Save a file

To save a file, you have to switch from Insert mode to Command Line mode. Remember I told you earlier, whenever you want to switch from one mode to another, you have to first switch to Command mode and then you can easily switch to whatever mode you want.

To switch to the Command mode from Insert mode, you have to press Esc key.

After you press Esc key, you'll not be able to see the --INSERT-- at the bottom left and this indicates that you're not on Insert mode and you're on Command mode.

Command mode in sample.txt file

To save the file, type the following command now,

:w
Enter fullscreen mode Exit fullscreen mode

Command to save the file

Close a file and Exit Vim

Once you save the file, you can close vim by closing the terminal. But, the proper way to close the file and Vim editor, is by using the following command.

:q
Enter fullscreen mode Exit fullscreen mode

Close the file and vim editor

The above command closes the file and quits the vim editor.

Alternatively, people use a command, that’s the combination of the above 2 commands (save & quit) to quickly save and quit Vim. The command is,

The above command quits the Vim editor immediately after saving the file.

Edit a file

To edit a file, you have to open the file using Vim and switch to the Insert mode.

Let’s open the sample.txt file we created above

vim sample.txt
Enter fullscreen mode Exit fullscreen mode

Open sample.txt file using vim

We are in Command mode now. To edit the file, we have to switch to Insert mode. As we saw earlier, pressing i from the Command mode will switch to the Insert mode.

Switch to Insert mode by pressing i

Follow the same procedure for saving the file and quitting Vim. Press Esc on the keyboard and type :w to save the file and :q to quit Vim.

You may raise an obvious question here.

What if I want to close the file without saving my changes? (Ignore the changes I made and bring the file back to the old state).

How to close the file without saving the changes?

To close the file without saving the changes, you have to run :q! from Command mode.

Let’s explore this with an example

Content in sample.txt file

I’ve added some more content to the file.

Added some content in sample.txt file

But, I don’t want to save the changes I made now. To close the file without saving this change, we have to switch to Command mode (by pressing Esc key). Type :q! in the Command mode. This will close the file ignoring the changes made now.

Ignore saving the sample.txt file

Let’s view the file and confirm if we get the expected output.

Yeah. The file does not have the last line which we added recently. So, the changes are not saved.

How to cut, copy, and paste a text from the file using Vim?

Cut, Copy, and Paste can be achieved in 2 ways in Vim. They are,

  1. Using Visual mode

  2. Using keyboard

Out of these 2, the Visual mode is simple to understand. Since we’re focussing on beginners, let’s explore cut, copy, & paste in Visual mode.

Let’s open the file in the command mode before we proceed

sample.txt file opened in command mode in Vim

Let’s assume you want to copy the word “Hello” from the 1st line and paste it into the 3rd line.

The first step is to place your cursor in the place from where you want to copy the text (being in the command mode).

Moved the cursor to the beginning of the word Hello

Enter Visual mode by pressing v key in the keyboard.

Enter Visual mode

The -- VISUAL -- text at the bottom left indicates that we're in visual mode.

Move the cursor to the place where the text you want to copy ends.

In this case, I’m moving the cursor to the letter o of the word Hello.

While you move your cursor, Visual mode highlights the text from the beginning till your cursor.

Highlighted text in Visual mode

Once you’re done moving your cursor to the right place, hit y to copy the text or hit d to cut the text.

In this case, I’m copying the text. So, I press y in my keyboard.

Move the cursor to the place where you want to paste the text.

Move the cursor to the place where you want to paste the text

In our case, we have to move the cursor to the 3rd line.

Press p (in lowercase) to paste the text after the cursor and P (in uppercase) to paste the text before the cursor.

Press :wq to save and close the file

How to find and replace text in Vim?

Finding a text and replacing it with some other text is simple and straightforward in Vim. There’s a one-line command that simplifies this entire process.

Here’s the syntax,

:[range]s/{pattern}/{string}/[flags]
Enter fullscreen mode Exit fullscreen mode

Let’s dismantle each part and understand them.

[range] indicates that you can pass the range of lines. Pass % to find and replace in all lines. The range is separated by a comma. To find and replace between lines 5 to 10, pass 5,10. Use . to represent the current line and $ the last line of the file.

{pattern} indicates the pattern to find the text. You can pass regex patterns here.

{string} is the string to replace in the found text.

[flags] indicates if you wish to pass any additional flags (Eg. The flag c is passed to confirm before replacing the text). By default, this does a case-sensitive search, you can change it to do a case-insensitive search by passing a i flag.

Alright, let’s explore this with an example.

sample.txt file content

Our sample.txt file has 2 "Hello". Let's replace "Hello" with "Hi" at both places.

The command to do that is,

:%s/Hello/Hi/g
Enter fullscreen mode Exit fullscreen mode

%s indicates replacing the content in the entire file

Hello is the search text

Hi is the text to replace

g indicates making the change globally

While running the command to change “Hello” with “Hi”

After running the command

Let’s understand this with another example.

This time, I want to change the word “Hi” (case-insensitive search) that occurs between lines 2 and 3 and replace it with “Hello and Welcome”, with a confirmation to change each occurrence.

The command to do that is,

:2,3s/Hi/Hello and Welcome/gci
Enter fullscreen mode Exit fullscreen mode

Running the command to change the text from line 2 to line 3

Asking for confirmation to change the occurrence

Here’s a description for each option,

y - Replace the match

n - Skip the match

a - Substitutes the match and all remaining occurrences of the match

q or Esc - Quit substitution

l - Replace the match and quit

CTRL+Y - Scroll the screen down

CTRL+E - Scroll the screen up

I want to accept the change. So, I press y. Here's the output after pressing y.

After replacing the word

Since we have only one occurrence of “Hi” between lines 2 and 3, it did not ask for any further confirmation and the operation is complete.

How to undo/redo in Vim?

To undo a change in Vim, press u in command mode. To redo, press CTRL + R. You can prepend a number (n) with u to undo n times. Eg. 2u will undo 2 times. To list the available undo options, type :undolist in command mode.

Let’s understand this with an example.

Here’s the current state of our sample.txt file.

Current state of sample.txt file

I have my cursor at “a” in the “Hello and Welcome” text on 3rd line. Let’s remove the word “and” by typing dw on command mode.

Removed the word and by typing dw in command mode

Let’s undo to bring the word “and” back into the file. To do so, press u in command mode.

Changes are undone after typing u in command mode

Let’s redo and take away the word “and” by typing CTRL + R in command mode.

Changes were applied again on redo by pressing CTRL + R in command mode

Conclusion

In this article, you have learnt the basics of Vim. This article will be enough to get your hands on Vim and do some basic file read/write operations with Vim. Literally, I’ve not even covered 1% of Vim. But I’m sure this basics will help you explore Vim quickly and confidently.

Drop a ❤️ if you liked the post. Follow me to receive more articles like this!

To learn more about Vim, subscribe to my newsletter.

Top comments (0)