DEV Community

Shahed Chowdhuri @ Microsoft for .NET

Posted on • Originally published at wakeupandcode.com on

Unit Testing in ASP .NET Core 3.1

This is the twenty-first of a new series of posts on ASP .NET Core 3.1 for 2020. In this series, we’ll cover 26 topics over a span of 26 weeks from January through June 2020, titled ASP .NET Core A-Z! To differentiate from the 2019 series, the 2020 series will mostly focus on a growing single codebase (NetLearner!) instead of new unrelated code snippets week.

Previous post:

NetLearner on GitHub :

In this Article:

U is for Unit testing

Whether you’re practicing TDD (Test-Driven Development) or writing your tests after your application code, there’s no doubt that unit testing is essential for web application development. When it’s time to pick a testing framework, there are multiple alternatives such as xUnit.net, NUnit and MSTest. This article will focus on xUnit.net because of its popularity (and similarity to its alternatives) when compared to the other testing frameworks.

In a nutshell: a unit test is code you can write to test your application code. Your web application will not have any knowledge of your test project, but your test project will need to have a dependency of the app project that it’s testing.

Unit Testing Project Dependencies
Unit Testing Project Dependencies

Here are some poll results, from asking 500+ developers about which testing framework they prefer, showing xUnit.net in the lead (from May 2019).

POLL: Hey #AspNetCore #webdev community on twitter! What do you use for unit testing #ASPNET web apps?

Please RT for reach. Thanks!

— Shahed Chowdhuri @ Microsoft (@shahedc ) May 22, 2019

A similar poll on Facebook also showed xUnit.net leading ahead of other testing frameworks. If you need to see the equivalent attributes and assertions, check out the comparison table provided by xUnit.net:

To follow along, take a look at the test projects on Github:

Setting up Unit Testing

The quickest way to set up unit testing for an ASP .NET Core web app project is to create a new test project using a template. This creates a cross-platform .NET Core project that includes one blank test. In Visual Studio 2019, search for “.net core test project” when creating a new project to identify test projects for MSTest, XUnit and NUnit. Select the XUnit project to follow along with the NetLearner samples.

Test Project Templates in Visual Studio 2019
Test Project Templates in Visual Studio 2019

The placeholder unit test class includes a blank test. Typically, you could create a test class for each application class being tested. The simplest unit test usually includes three distinct steps: Arrange, Act and Assert.

  1. Arrange : Set up the any variables and objects necessary.
  2. Act : Call the method being tested, passing any parameters needed
  3. Assert : Verify expected results

The unit test project should have a dependency for the app project that it’s testing. In the test project file NetLearner.Mvc.Tests.csproj, you’ll find a reference to NetLearner.Mvc.csproj.

... <ItemGroup> <ProjectReference Include="..\NetLearner.Mvc\NetLearner.Mvc.csproj" /></ItemGroup>...

In the Solution Explorer panel, you should see a project dependency of the reference project.

Project Reference in Unit Testing Project
Project Reference in Unit Testing Project

If you need help adding reference projects using CLI commands, check out the official docs at:

Facts, Theories and Inline Data

When you add a new xUnit test project, you should get a simple test class ( UnitTest1 ) with an empty test method ( Test1 ). This test class should be a public class and the test method should be decorated with a [Fact] attribute. The attribute indicates that this is a test method without any parameters, e.g. Test1 ().

public class **UnitTest1** { [**Fact**] public void **Test1** () { }}

In the NetLearner Shared Library test project, you’ll see a test class (ResourceListServiceTests.cs) with a series of methods that take 1 or more parameters. Instead of a [Fact] attribute, each method has a [Theory] attribute. In addition to this primary attribute, each [Theory] attribute is followed by one of more [InlineData] attributes that have sample argument values for each method parameter.

[**Theory** (DisplayName = "Add New Resource List")][**InlineData** ("RL1"**)]**public async void **TestAdd** (string expectedName){ ...}

In the code sample, each occurrence of [InlineData] should reflect the test method’s parameters, e.g.

  • [InlineData(“RL1”)] –> this implies that expectedName = “RL1”

NOTE : If you want to skip a method during your test runs, simply add a Skip parameter to your Fact or Theory with a text string for the “Reason”.

e.g.

  • [Fact (Skip=”this is broken”)]
  • [Theory (Skip=”we should skip this too”)]

Asserts and Exceptions

Back to the 3-step process, let’s explore the TestAdd () method and its method body.

public async void **TestAdd** (string expectedName){ var options = new DbContextOptionsBuilder<LibDbContext>() .UseInMemoryDatabase(databaseName: "TestNewListDb").Options; // Set up a context (connection to the "DB") for writing using (var context = new LibDbContext(options)) { **_// 1. Arrange_** var rl = new ResourceList { Name = "RL1" }; **_// 2. Act_** var rls = new ResourceListService(context); await rls.Add(rl); } using (var context = new LibDbContext(options)) { var rls = new ResourceListService(context); var result = await rls.Get(); **_// 3. Assert_** Assert.NotEmpty(result); Assert.Single(result); Assert.NotEmpty(result.First().Name); Assert.Equal(expectedName, result.First().Name); }}
  1. During the Arrange step, we create a new instance of an object called ResourceList which will be used during the test.
  2. During the Act step, we create a ResourceListService object to be tested, and then call its Add () method to pass along a string value that was assigned via InlineData.
  3. During the Assert step, we compare the expectedName (passed by InlineData) with the returned result (obtained from a call to the Get method in the service being tested).

The Assert.Equal() method is a quick way to check whether an expected result is equal to a returned result. If they are equal, the test method will pass. Otherwise, the test will fail. There is also an Assert.True() method that can take in a boolean value, and will pass the test if the boolean value is true.

For a complete list of Assertions in xUnit.net, refer to the Assertions section of the aforementioned comparison table:

If an exception is expected, you can assert a thrown exception. In this case, the test passes if the exception occurs. Keep in mind that unit tests are for testing expected scenarios. You can only test for an exception if you know that it will occur, e.g.

Exception ex = Assert .Throws< **SpecificException** >(() => someObject. **MethodBeingTested** (x, y));

The above code tests a method named MethodBeingTested () for someObject being tested. A SpecificException () is expected to occur when the parameter values x and y are passed in. In this case, the Act and Assert steps occur in the same statement.

NOTE : There are some differences in opinion whether or not to use InMemoryDatabase for unit testing. Here are some viewpoints from .NET experts Julie Lerman (popular Pluralsight author) and Nate Barbettini (author of the Little ASP .NET Core book):

Running Tests

To run your unit tests in Visual Studio, use the Test Explorer panel.

  1. From the top menu, click Test | Windows | Test Explorer
  2. In the Test Explorer panel, click Run All
  3. Review the test status and summary
  4. If any tests fail, inspect the code and fix as needed.

Test Explorer in VS2019
Test Explorer in VS2019

To run your unit tests with a CLI Command, run the following command in the test project folder:

> **dotnet** test

The results may look something like this:

As of xUnit version 2, tests can automatically run in parallel to save time. Test methods within a class are considered to be in the same implicit collection, and so will not be run in parallel. You can also define _explicit _collections using a [Collection] attribute to decorate each test class. Multiple test classes within the same collection will not be run in parallel.

For more information on collections, check out the official docs at:

NOTE : Visual Studio includes a Live Unit Testing feature that allows you to see the status of passing/failing tests as you’re typing your code. This feature is only available in the Enterprise Edition of Visual Studio.

Custom Names and Categories

You may have noticed a DisplayName parameter when defining the [Theory] attribute in the code samples. This parameter allows you to defined a friendly name for any test method (Fact or Theory) that can be displayed in the Test Explorer. For example:

[**Theory** (DisplayName = "Add New Learning Resource")]

Using the above attribute above the TestAdd () method will show the friendly name “ Add New Learning Resource ” in the Test Explorer panel during test runs.

Unit Test with custom DisplayName
Unit Test with custom DisplayName

Finally, consider the [Trait] attribute. This attribute can be use to categorize related test methods by assigning an arbitrary name/value pair for each defined “Trait”. For example (from LearningResource and ResourceList tests, respectively):

[**Trait** ("Learning Resource Tests", "Adding LR")]public void  **TestAdd** () { ... }[**Trait** ("Resource List Tests", "Adding RL")]public void **TestAdd** { ... }

Using the above attribute for the two TestAdd () methods will categorize the methods into their own named “category”, e.g. Learning Resource Tests and Resource List Tests. This makes it possible to filter just the test methods you want to see, e.g. Trait: “Adding RL”

Filtering Unit Tests by Trait Values
Filtering Unit Tests by Trait Values

Next Steps: Mocking, Integration Tests and More!

There is so much more to learn with unit testing. You could read several chapters or even an entire book on unit testing and related topics. To continue your learning in this area, consider the following:

  • MemberData : use the MemberData attribute to go beyond isolated test methods. This allows you to reuse test values for multiples methods in the test class.
  • ClassData : use the ClassData attribute to use your test data in multiple test classes. This allows you to specify a class that will pass a set of collections to your test method.

For more information on the above, check out this Nov 2017 post from Andrew Lock:

To go beyond Unit Tests, consider the following:

  • Mocking : use a mocking framework (e.g. Moq) to mock external dependencies that you shouldn’t need to test from your own code.
  • Integration Tests : use integration tests to go beyond isolated unit tests, to ensure that multiple components of your application are working correctly. This includes databases and file systems.
  • UI Tests : test your UI components using a tool such as Selenium WebDriver or IDE in the language of your choice, e.g. C#. For browser support, you may use Chrome or Firefox extensions, so this includes the new Chromium-based Edge browser.

While this article only goes into the shared library, the same concepts carry over into the testing of each individual web app project (MVC, Razor Pages and Blazor). Refer to the following documentation and blog content for each:

Refer to the NetLearner sample code for unit tests for each web project:

In order to set up a shared service object to be used by the controller/page/component being tested, Moq is used to mock the service. For more information on Moq, check out their official documentation on GitHub:

For the Blazor testing project, the following references were consulted:

NOTE : Due to differences between bUnit beta 6 and 7, there are some differences between the Blazor guide and the NetLearner tests on Blazor. I started off with the Blazor guide, but made some notable changes.

  1. Instead of starting with a Razor Class Library template for the test project, I started with the xUnit Test Project template.
  2. There was no need to change the test project’s target framework from .NET Standard to .NET Core 3.1 manually, since the test project template was already Core 3.1 when created.
  3. As per the bUnit guidelines, the test class should no longer be derived from the ComponentTestFixture class, which is now obsolete: https://github.com/egil/bunit/blob/6c66cc2c77bc8c25e7a2871de9517c2fbe6869dd/src/bunit.web/ComponentTestFixture.cs
  4. Instead, the test class is now derived from the TestContext class, as seen in the bUnit source code: https://github.com/egil/bunit/blob/6c66cc2c77bc8c25e7a2871de9517c2fbe6869dd/src/bunit.web/TestContext.cs

References

Top comments (0)