Are you fed up of slow and discontinuous internet connection? Are you looking for some effective methods to fix your intermittent internet connection? If the answer to these questions is Yes, then you’ve arrived at the right place. Here, in this post, we’ve come up with some useful tips and tricks that will guide you on how to fix your discontinuous internet connection. Let’s get started.
Troubleshoot your Internet connection
Perform a Ping test
First and foremost, consider performing a Ping test to see if you are connected to the internet or not. Though several free Ping utilities are there, still the best way is to perform a ping test is using the command prompt. Well, the process is quite simple.
To perform a Ping test:
- Hit the Windows button on your computer.
- Open the command prompt window.
- Type Ping followed by the IP address of the website you want to ping.
Once you have performed the above-mentioned process, it will send small data packets to the target sites and measure how fast your internet connection is . If the result is successful, you will see the timed results. In case, it is not, then the problem can be with your broadband modem or your WiFi router.
So, to resolve the issue, you have to make sure that the firmware on your router is of the latest version . And if your broadband modem is 5-6 years old, then better replace it or contact your service provider.
Make sure that your networking devices are getting proper power supply
One reason that you can’t connect to mywifiext.net new extender setup page or to the internet may be your Netgear extender isn’t getting enough power. It may be unplugged or powered off. So, make sure that your Netgear WiFi extender is plugged in properly into a working outlet.
Another reason for slow and sluggish internet connection would be your existing router. Your WiFi router is the crucial element of the home networking system. So, you have to make sure that your router is placed openly and plugged into a damaged-free electrical outlet.
If the issue still persists, disconnect the power cord of your router and the range extender and reconnect them again after a few minutes. If you own cable or DSL modem, make sure that it is getting a proper power supply.
You need a Netgear WiFi range extender
If you are not getting the expected internet range in your balcony, lobby, terrace, backyard or courtyard of your house, then we suggest you to go with Netgear WiFi range extender using mywifiext.
Netgear extender is a device that helps in keeping all your wired are wireless devices connected in every room for a fast, reliable, secure and continuous internet connection.
For Netgear Extender Setup:
- Plug your Netgear extender into an electrical outlet.
- Connect your WiFi router to your Netgear WiFi extender.
- Open a web browser on a computer or laptop.
- Type mywifiext.net into the browser's address bar.
- Netgear Genie setup page displays.
- Follow the instructions given on screen and complete the new extender setup with great ease.
Change the channel
Your WiFi router uses 14 frequencies or channels to send and receive data over the 2.4GHz (Gigahertz) band. Most channels overlap, but channels 1, 6, and 11 do not. If your internet connection is spotty, then you might experience channel interference.
To fix the issue, consider changing your WiFi channel using the router management console. In case, the channel is set to Auto, then try to set it to another channel and see whether it improves your internet connection or not.
Thus, by following the above-mentioned ways, you can easily fix discontinuous internet connection. In case, the issue hasn't been resolved yet, then don't worry. Simply drop your queries into the comments section and we will reach you with a solution shortly.