DEV Community

Cover image for Customizing F5 Debugging in Teams Toolkit for VS Code
Tomomi Imura 🐱 for Microsoft Azure

Posted on

Customizing F5 Debugging in Teams Toolkit for VS Code

Earlier this year, Teams Toolkit has introduced a few new features that have been added in the latest Toolkit to improve your debugging experience, including Prerequisite Checker and Customizing Debug Settings.

With the latest Toolkit in v.4.1.0 and greater, you can now customize the debugging experiences even more!

If this is the first time with Teams Toolkit, please check out these tutorials first:

πŸ› Debugging Experiences in Teams Toolkit

Debugging in VS Code is casually referred to as F5 among developers, is one of the key features of Visual Studio Code, and this built-in debugger helps accelerate your edit, compile, and debug loop.

When you created any project with Teams Toolkit in VS Code, you also use this F5 debugger to run the code. While you are waiting, Teams Toolkit runs various process, check prerequisites, and output the results like this:

Screenshot of debug output from Teams Toolkit in VS Code

In the Output section, you can view what the debugger is doing. In this screenshot, you can see a checklist, including whether you have a specific Node.js, your M365 account status, etc.

So, where these tasks and the checklist are defined? It is in .vscode/tasks.json in the generated project, and you can customize in the way you want. So let's take a look at some customization examples for both a tab app and bot app.

πŸ—‚ Customizing tasks.json for Tab Apps

First, let's create a new app by choosing the SSO-enabled Tab from the menu:

Screenshot of app creation in Teams Toolkit

Once the project is generated, open .vscode/tasks.json and see what are defined:
Screenshot of Teams Toolkit

You may want to try debugging and see how each item defined in the tasks.json runs and display in the Output by default:
Screenshot of Teams Toolkit Debug Output

Now, see how to customize the debugging flow by editing the tasks.json file.

βœ… Customizing Prerequisites

For example, if you want to skip certain processes, such as checking prerequisites and installing npm packages, just comment out where they are defined in "tasks":

"tasks": [
  {
    "label": "Start Teams App Locally",
    "dependsOn": [
      //"Validate & install prerequisites",
      //"Install npm packages",
      "Set up tab",
      "Set up SSO",
      "Build & upload Teams manifest",
      "Start services"
  ],
Enter fullscreen mode Exit fullscreen mode

Or you can select prerequisites validation independently. Scroll down to the next object in JSON then editing these lines. For example, if you want to skip checking if Node.js is installed, comment the line out:

{
  "label": "Validate & install prerequisites",
  "type": "teamsfx",
  "command": "debug-check-prerequisites",
  "args": {
    "prerequisites": [
      //"nodejs",
      "m365Account", 
      "devCert", 
      "portOccupancy"
    ],
Enter fullscreen mode Exit fullscreen mode

Try running F5 and see if the processes are skipped.

πŸ›Ž Customizing npm Commands

Also, you can customize npm install commands by adding an optional argument, for example, --force to force npm to fetch remote resources even if a local copy exists:

{
  "label": "Install npm packages",
  "type": "teamsfx",
  "command": "debug-npm-install",
  "args": {
    "projects": [
      {
        "cwd": "${workspaceFolder}/tabs",
        "npmInstallArgs": [
          "--no-audit",
          "--force" // added!
        ]
...
Enter fullscreen mode Exit fullscreen mode

πŸ›³ Changing Service Port

Tabs in tab apps are basically web pages embedded in Teams client, and they run on a specific port when you debug locally. By default, it is set 53000 and the web portion of your app can be debugged in https://localhost:53000. The Toolkit debugger checks if the port is available.

If you would like to change the port, you need to edit two places in the JSON file:

{
  "label": "Validate & install prerequisites",
  "type": "teamsfx",
  "command": "debug-check-prerequisites",
  "args": {
    "prerequisites": [
      "nodejs",
      "m365Account", 
      "devCert", 
      "portOccupancy"
    ],
    "portOccupancy": [
        33000 // was 53000
    ]
  }
Enter fullscreen mode Exit fullscreen mode

and

{
  "label": "Set up tab",
  "type": "teamsfx",
  "command": "debug-set-up-tab",
  "args": {
    "baseUrl": "https://localhost:33000" // was 53000
  }
},
Enter fullscreen mode Exit fullscreen mode

And you can customize more by deleting/commenting out lines, edit values, and add values in the JSON file.

Some values are commented out by default, such as SSO setup, so you can enable some by uncommenting the lines too. Just customize as your app needs!

πŸ€– Customizing tasks.json for Bots

Next, let's take a look at a bot app. You can customize the tasks in the way I showed you for tab apps (such as the prerequisites checks), except there are some differences between tabs and bots.

Let's create a new command bot and see how the tasks are different.

Screenshot of Teams Toolkit in VS Code

Open the file at .vscode > tasks.json. You can see some tasks are different from the tab app. There are bot-specific tasks including, "Set up bot" and "Start local tunnel":

"tasks": [
  {
    "label": "Start Teams App Locally",
    "dependsOn": [
      "Validate & install prerequisites",
      "Install npm packages",
      "Start local tunnel",
      "Set up bot",
      "Build & upload Teams manifest",
      "Start services"
    ],
    "dependsOrder": "sequence"
  }
...
Enter fullscreen mode Exit fullscreen mode

When you run the debugger, you can see the process in the Output pane, in the same way you saw for the tab app.

Customization can be done in the same manner, so if you want to skip certain tasks, you can comment the lines out.

Next, we are going to take a look at the bot-specific tasks and settings.

πŸ›³ Changing Bot Service Port

Bots use ports to run bot services, where tabs run web services.

Just like the port for tabs you just learned, you can manually change the "PortOccupancy". Let's change the bot service port to something different from the default, 3978:

"args": {
  "prerequisites": [
    ...
  ],
  "portOccupancy": [
    4978, // bot service port. By default it it 3978
    9239 // bot inspector port for Node.js debugger
  ]
}
Enter fullscreen mode Exit fullscreen mode

And you also need to change this in "ngrokArgs" setting, as well as in another file. You can search and replace the port number:

Screenshot of Teams Toolkit in VS Code

πŸ” Using Your Own Local Tunneling Service

By default, the local tunnel is created with a tool called, ngrok, however, you can replace it with something else you prefer.

To make the change, first, comment out the "Start local tunnel" from the tasks' "dependsOn":

"tasks": [
  {
    "label": "Start Teams App Locally",
    "dependsOn": [
      "Validate & install prerequisites",
      "Install npm packages",
      //"Start local tunnel",
      "Set up bot",
      "Build & upload Teams manifest",
      "Start services"
    ],
...
Enter fullscreen mode Exit fullscreen mode

Then, change the "botMessagingEndPoint" to your own tunnel URL at the bot setup task. I want to use my contoso service, so I am using the preferred path:

{
  "label": "Set up bot",
  "type": "teamsfx",
  "command": "debug-set-up-bot",
  "args": {
   "botMessagingEndpoint": "https://contoso.com/api/message"
  }
},
Enter fullscreen mode Exit fullscreen mode

Note: Contoso is a fictional service, in case you are not familiar with this Microsoft's favorite fake company name πŸ˜‰

Run F5 and see the changes.


I didn't cover every possible task scenarios here, but I hope you found the article helpful for debugging your Teams apps. Please don't hesitate to drop your comments and feedback here.

Mahalo and see you soon πŸ‘‹

πŸ“š Learn More


πŸ“’ Shoutout

Teams Toolkit Engineering team, especially Ji Dong 🌟

Top comments (0)