The newest entry into AWS container management is designed to help remove the amount of configuration and management that you must use when working with containers. App Runner is a fully managed service that automatically builds and deploys the application as well creating the load balancer. App Runner also manages the scaling up and down based upon traffic. What do you, as a developer, have to do to get your container running in App Runner? Let’s take a look.
First, log into AWS and go to the App Runner console home. If you click on the Services link you will find App Runner under the Compute section rather than the Containers section, even though its purpose is to easily run containers. Click on the Create an App Runner Service button to get the Step 1 page as shown in Figure 1.
Figure 1. Creating an App Runner service
The first section, Source, requires you to identify where the container image that you want to deploy is stored. You currently, at the time of this writing, can choose either a container registry, Amazon ECR, or a source code repository. Since we have already loaded an image in ECR in the last post, let us move forward with this option by ensuring Container registry and Amazon ECR are selected, and then clicking the Browse button to bring up the image selection screen as shown in Figure 2.
Figure 2 – Selecting a container image from ECR
In this screen we selected the “prodotnetonaws” image repository that we created in the last post and the container image with the tag of “latest”.
Once you have completed the Source section, the next step is to determine the Deployment settings for your container. Here, your choices are to use the Deployment trigger of Manual, which means that you must fire off each deployment yourself using the App Runner console or the AWS CLI, or Automatic, where App Runner watches your repository, deploying the new version of the container every time the image changes. In this case, we will choose Manual so that we have full control of the deployment.
Warning: When you have your deployment settings set to Automatic, every time the image is updated App Runner will trigger a deployment. This may be appropriate in a development or even test environment, but it is unlikely that you will want to use this in a production setting.
The last data that you need to enter on this page is to give App Runner an ECR access role that App Runner will use to access ECR. In this case, we will select Create new service role and App Runner will pre-select a Service name role. Click the Next button when completed.
The next step is entitled Configure service and is designed to, surprisingly enough, help you configure the service. There are 5 sections on this page, Service settings, Auto scaling, Health check, Security, and Tags. The only section that is expanded is the first, all of the other sections need to be expanded before you see the options.
The first section, Service settings, with default settings can be seen in Figure 3.
Figure 3 – Service settings in App Runner
Here you set the Service name, select the Virtual CPU & memory, configure any optional Environmental variables that you may need, and determine the TCP Port that your service will use. If you are using the sample application that we loaded into ECR in the previous post you will need to change the port value from the default 8080 to port 80 so that it will serve the application we configured in the container. You also have the ability, under Additional configuration, to add a Start command which will be run on launch. This is generally left blank if you have configured the entry point within the container image. We gave the service the name “ProDotNetOnAWS-AR” and let all the rest of the settings in this section remain as default.
The next section is Auto scaling, and there are two major options, Default configuration and Custom configuration, each of which provide the ability to set the auto scaling values as shown in Figure 4.
Figure 4 – Setting the Auto scaling settings in App Runner
The first of these auto scaling values is Concurrency. This value represents the maximum number of concurrent requests that an instance can process before App Runner scales up the service. The default configuration has this set at 100 requests that you can customize if using the Custom configuration setting.
The next value is Minimum size, or the number of instances that App Runner provisions for your service, regardless of concurrent usage. This means that there may be times where some of these provisioned instances are not being used. You will be charged for the memory usage of all provisioned instances, but only for the CPU of those instances that are actually handling traffic. The default configuration for minimum size is set to 1 instance.
The last value is Maximum size. This value represents the maximum number of instances to which your service will scale; once your service reaches the maximum size there will be no additional scaling no matter the number of concurrent requests. The default configuration for maximum size is 25 instances.
If any of the default values do not match your need, you will need to create a custom configuration, which will give you control over each of these configuration values. To do this, select Custom configuration. This will display a drop-down that contains all of the App Runner configurations you have available (currently it will only have “DefaultConfiguration” because we have yet to define a different configuration) and an Add new button. Clicking this button will bring up the entry screen as shown in Figure 5.
Figure 5 – Customizing auto scaling in App Runner
The next section after you configure auto scaling is Health check. The first value you set in this section is the Timeout, which describes the amount of time, in seconds, that the load balancer will wait for a health check response. The default timeout is 5 seconds. You also can set the Interval, which is the number of seconds between health checks of each instance and is defaulted to 10 seconds. You can also set the Unhealthy and Health thresholds, where the unhealthy threshold is the number of consecutive health check failures that means that an instance is unhealthy and needs to be recycled and the health threshold is the number of consecutive successful health checks necessary for an instance to be determined to be healthy. The default for these values is 5 requests for unhealthy and 1 request for healthy.
You next can assign an IAM role to the instance in the Security section. This IAM role will be used by the running application if it needs to communicate to other AWS services, such as S3 or a database server. The last section is Tags, where you can enter one or more tags to the App Runner service.
Once you have finished configuring the service, clicking the Next button will bring you to the review screen. Clicking the Create and deploy button on this screen will give the approval for App Runner to create the service, deploy the container image, and run it so that the application is available. You will be presented with the service details page and a banner that informs you that “Create service is in progress.” This process will take several minutes, and when completed will take you to the properties page as shown in Figure 6.
Figure 6 – After App Runner is completed
Once the service is created and the status is displayed as Running, you will see a value for a Default domain which represents the external-facing URL. Clicking on it will bring up the home page for your containerized sample application.
There are five tabs displayed under the domain, Logs, Activity, Metrics, Configuration, and Custom Domain. The Logs section displays the Event, Deployment, and Application logs for this App Runner service. This is where you will be able to look for any problems during deployment or running of the container itself. You should be able, under the Event log section, to see the listing of events from the service creation. The Activity tab is very similar, in that it displays a list of activities taken by your service, such as creation and deployment.
The next tab, Metrics, tracks metrics related to the entire App Runner service. This where you will be able to see information on HTTP connections and requests, as well as being able to track the changes in the number of used and unused instances. By going into the sample application (at the default domain) and clicking around the site, you should see these values change and a graph become available that provides insight into these various activities.
The Configuration tab allows you to view and edit many of the settings that we set in the original service creation. There are two different sections where you can make edits. The first is at the Source and deployment level, where you can change the container source and whether the deployment will be manual or automatically happen when the repository is updated. The second section where you can make changes is at the Configure service level where you are able to change your current settings for autoscaling, health check, and security.
The last tab on the details page is Custom domain. The default domain will always be available for your application; however, it is likely that you will want to have other domain names pointed to it – we certainly wouldn’t want to use https://SomeRandomValue.us-east-2.awsapprunner.com for our company’s web address. Linking domains is straightforward from the App Runner side. Simply click the Link domain button and input the custom domain that you would like to link, we of course used “prodotnetonaws.com”. Note that this does not include “www”, because this usage is currently not supported through the App Runner console. Once you enter the customer domain name, you will be presented the Configure DNS page as shown in Figure 7.
Figure 7 – Configuring a custom domain in App Runner
This page contains a set of certificate validation records that you need to add to your Domain Name System (DNS) so that App Runner can validate that you own or control the domain. You will also need to add CNAME records to your DNS to target the App Runner domain; you will need to add one record for the custom domain and another for the www subdomain if so desired. Once the certificate validation records are added to your DNS, the customer domain status will become Active and traffic will be directed to your App Runner instance. This evaluation can take anywhere from minutes to up to 48 hours, depending upon your DNS provider.
Once your App Runner instance is up and running this first time, there are several actions that you can take on it as shown in the upper right corner of Figure 7. The first is the orange Deploy button. This will deploy the container from either the container or source code repository depending upon your configuration. You also can Delete the service, which is straightforward, as well as Pause the service. There are some things to consider when you pause your App Runner service. The first is that your application will lose all state – much as if you were deploying a new service. The second consideration is that if you are pausing your service because of a code defect, you will not be able to redeploy a new (presumably fixed) container without first resuming the service.
Top comments (0)