Kubernetes is a powerful yet complicated container orchestration system. It can be used to run resilient workloads on virtually any cloud platform, including AWS, GCS, Azure, DigitalOcean, and more. In this tutorial, you’ll explore some of the most commonly-used building blocks of a Kubernetes application – Pods, Deployments, and Services. These resources could be created with standard Kubernetes manifests if desired, but the method of using manifests has faults, including one major drawback, which is that there’s no state preservation.
Terraform is an infrastructure-as-code tool created by Hashicorp to make handling infrastructure more straightforward and manageable. Terraform files use a declarative syntax where the user specifies resources and their properties such as pods, deployments, services, and ingresses. Users then leverage the Terraform CLI to preview and apply expected infrastructure. When changes are desired, a user simply updates and reapplies the same file or set of files; then, Terraform handles resource creation, updates, and deletion as required.
For this tutorial, start by creating a Kubernetes cluster. By following along, you’ll learn how to define Kubernetes resources using Terraform and apply the configuration to the cluster. When everything is up and running, you’ll have your own “Hello World” service running on the cloud!
Project dependencies for Kubernetes and Terraform
You’ll be using Terraform to deploy all of the required resources to the Kubernetes cluster. kubectl can optionally be installed if you’d like more insights into what has been created. Also, be sure to have an account with a cloud provider that has Kubernetes hosting. Once those requirements are met, you’re ready to get started!
Define Kubernetes Resources with Terraform
Terraform requires that the user uses its special language called HCL, which stands for Hashicorp Configuration Language. Create a folder called terraform-example where the HCL files will live, then change directories to that folder. Terraform providers will need to be defined and installed to use certain types of resources. This tutorial will use the Kubernetes and the Helm providers. Providers are easily downloaded and installed with a few lines of HCL and a single command. Be sure that you have downloaded your cluster’s kubeconfig, as it will be necessary for the rest of the tutorial. Create a file called versions.tf where providers will be defined and add the following code:
terraform {
required_providers {
kubernetes = {
source = "hashicorp/kubernetes"
version = ">= 2.0.0"
}
helm = {
source = "hashicorp/helm"
}
}
}
provider "kubernetes" {
config_path = "<your_kubeconfig_path>"
}
provider "helm" {
kubernetes {
config_path = "<your_kubeconfig_path>"
}
}
Be sure to replace <your_kubeconfig_path> in each provider block with the location of the kubeconfig you’ve downloaded. Now that the required providers are defined, they can be installed by running the command terraform init. Ensure that the command is run in the same folder that versions.tf is in. The command should print something like what’s below, indicating success:
Initializing the backend...
Initializing provider plugins...
- Reusing previous version of hashicorp/kubernetes from the dependency lock file
- Reusing previous version of hashicorp/helm from the dependency lock file
- Installing hashicorp/kubernetes v2.0.1...
- Installed hashicorp/kubernetes v2.0.1 (signed by HashiCorp)
- Installing hashicorp/helm v2.0.2...
- Installed hashicorp/helm v2.0.2 (signed by HashiCorp)
Terraform has been successfully initialized!
You may now begin working with Terraform. Try running "terraform plan" to see any changes that are required for your infrastructure. All Terraform commands should now work.
If you ever set or change modules or backend configuration for Terraform, rerun this command to reinitialize your working directory. If you forget, other commands will detect it and remind you to do so if necessary.
Note that a folder has been created alongside versions.tf called .terraform. This folder is where the installed providers are stored to be used for later terraform processes. Now that the prerequisites to run terraform are out of the way, the resource definitions can be created. Add a file alongside versions.tf called main.tf. For simplicity, all resources will be created in the same file. Add the following resource definition to main.tf:
resource "kubernetes_namespace" "hello_world_namespace" {
metadata {
labels = {
app = "hello-world-example"
}
name = "hello-world-namespace"
}
}
This block defines the Kubernetes namespace that will be created for all of the other resources to live in. A Kubernetes namespace helps separate resources into groups when certain things do not need to interact. It’s not truly necessary in this case, but using namespaces is a good practice to ensure that strange collisions don’t occur down the line. Next, add the resource definition for a simple Kubernetes deployment to main.tf:
resource "kubernetes_deployment" "hello_world_deployment" {
metadata {
name = "kubernetes-example-deployment"
namespace = "hello-world-namespace"
labels = {
app = "hello-world-example"
}
}
spec {
replicas = 1
selector {
match_labels = {
app = "hello-world-example"
}
}
template {
metadata {
labels = {
app = "hello-world-example"
}
}
spec {
container {
image = "heroku/nodejs-hello-world"
name = "hello-world"
}
}
}
}
}
The deployment spec is where a user defines the expected state of a set of pods. The deployment controller in the cluster will then update pods to that expected state. Note that the deployment is scoped to the namespace that has just been created, hello-world-namespace. The spec block in the deployment is where the expected state of a pod or set of pods is defined and, in this case, where the single “Hello World” service is defined. All it takes is specifying the container that needs to be run because the pod will be running a public Docker image. The Kubernetes service is the next resource that needs to be defined. Add the service to main.tf with the code below:
resource "kubernetes_service" "hello_world_service" {
depends_on = [kubernetes_deployment.hello_world_deployment]
metadata {
labels = {
app = "hello-world-example"
}
name = "hello-world-example"
namespace = "hello-world-namespace"
}
spec {
port {
name = "api"
port = 3000
target_port = 3000
}
selector = {
app = "hello-world-example"
}
type = "ClusterIP"
}
}
A Kubernetes service defines how a group of pods should be accessed. It’s important that the service is created after the deployment and the pods are, so Terraform has the handy depends_on keyword to handle that. depends_on is an array that exists on many Terraform resource definitions that allows the user to specify what resources a service should be created after. Like the deployment, the service is also created in the hello-world-namespace to only target pods running there. The service’s selector defines labels of pods that it should be targeting to enable access. The app = "hello-world-example" selector is defined here because it matches the labels that are set on the deployment’s pods. The service also defines what ports can be accessed. In this case, when traffic is sent to port 3000 of the service, it will then be routed to port 3000 of one of the selected group’s pods.
Use Terraform to create Kubernetes resources that enable cluster access
The Terraform resources that have been defined so far create everything that’s needed to run an application accessible to the cluster, but more resources are needed to access the application from the outside world. Most importantly, a load balancer should be put in front of the “Hello World” service to handle the traffic. This tutorial uses the Nginx Ingress Controller and the Helm Terraform provider to create it. Add the following to main.tf to create the Nginx ingress controller:
resource "helm_release" "ingress_nginx" {
name = "ingress-nginx"
repository = "https://kubernetes.github.io/ingress-nginx"
chart = "ingress-nginx"
version = "3.15.2"
namespace = "hello-world-namespace"
timeout = 300
values = [<<EOF
controller:
admissionWebhooks:
enabled: false
electionID: ingress-controller-leader-internal
ingressClass: nginx-hello-world-namespace
podLabels:
app: ingress-nginx
service:
annotations:
service.beta.kubernetes.io/aws-load-balancer-type: nlb
scope:
enabled: true
rbac:
scope: true
EOF
]
}
Using the Helm Terraform provider and, in turn, the Helm chart makes creating the required Kubernetes resource much easier because it’s not necessary to add a bunch of boilerplate to the Terraform file. If you’d like to explore more than is covered in this tutorial, feel free to check out the Helm chart here. When Terraform creates the helm_release resource, it will create an ingress-nginx-controller deployment, pod, replica set, and other resources required to run the load balancer within the cluster. One more resource needs to be added to expose the Nginx controller to the outside world. Create a Kubernetes ingress for the Nginx controller by adding the following resource definition to main.tf:
resource "kubernetes_ingress" "ingress" {
metadata {
labels = {
app = "ingress-nginx"
}
name = "api-ingress"
namespace = "hello-world-namespace"
annotations = {
"kubernetes.io/ingress.class": "nginx-hello-world-namespace"
}
}
spec {
rule {
http {
path {
path = "/"
backend {
service_name = "hello-world-example"
service_port = 3000
}
}
}
}
}
}
Note that the ingress resource is created in the hello-world-namespace namespace like all other resources in this tutorial. It’s also important that the annotation kubernetes.io/ingress.class is named nginx-<namespace_name> so that the Nginx ingress controller knows to handle the ingress rules. Finally, the spec portion of the ingress definition defines how Nginx should be configured. In this case, all traffic is routed to the service named “hello-world-example” at port 3000 and, in turn, to the pods backing the service which are running the “Hello World” application. Now that all required resources are defined, you’re ready to run the Terraform deployment!
Before running the deployment, it may be useful to see what exactly it is that Terraform will create based on the template. That’s especially useful as the infrastructure grows. Run the command terraform plan -out=tfplan to see what resources Terraform will add, change, or destroy. On the first run, your output should look something like this:
An execution plan has been generated and is shown below.
Resource actions are indicated with the following symbols:
+ create
Terraform will perform the following actions:
# helm_release.ingress_nginx will be created
+ resource "helm_release" "ingress_nginx" {
+ atomic = false
+ chart = "ingress-nginx"
...
+ port = 3000
+ protocol = "TCP"
+ target_port = "3000"
}
}
}
Plan: 5 to add, 0 to change, 0 to destroy.
------------------------------------------------------------------------
This plan was saved to: tfplan
To perform exactly these actions, run the following command to apply:
terraform apply "tfplan"
Each resource that will be created along with details about its properties is shown in the terminal. Once you’re ready to actually create the resources in the cluster, run the command terraform apply tfplan and wait for it to complete. The load balancer may take a couple minutes to provision. Once completed, you should have seen something like below:
kubernetes_namespace.hello_world_namespace: Creating...
kubernetes_ingress.ingress: Creating...
kubernetes_deployment.hello_world_deployment: Creating...
helm_release.ingress_nginx: Creating...
kubernetes_namespace.hello_world_namespace: Creation complete after 1s [id=hello-world-namespace]
kubernetes_ingress.ingress: Creation complete after 1s [id=hello-world-namespace/api-ingress]
kubernetes_deployment.hello_world_deployment: Creation complete after 9s [id=hello-world-namespace/kubernetes-example-deployment]
kubernetes_service.hello_world_service: Creating...
kubernetes_service.hello_world_service: Creation complete after 0s [id=hello-world-namespace/hello-world-example]
helm_release.ingress_nginx: Still creating... [10s elapsed]
helm_release.ingress_nginx: Still creating... [20s elapsed]
...
helm_release.ingress_nginx: Still creating... [2m20s elapsed]
helm_release.ingress_nginx: Still creating... [2m30s elapsed]
helm_release.ingress_nginx: Creation complete after 2m36s [id=ingress-nginx]
Apply complete! Resources: 5 added, 0 changed, 0 destroyed.
The state of your infrastructure has been saved to the path
below. This state is required to modify and destroy your
infrastructure, so keep it safe. To inspect the complete state
use the `terraform show` command.
State path: terraform.tfstate
And that’s it; you now have an application running in the cloud! But how can it be accessed? You can find out how with one kubectl command. Enter the following command in a terminal and be sure to replace <your_kubeconfig_file_path>:
kubectl get service ingress-nginx-controller -n hello-world-namespace --kubeconfig=<your_kubeconfig_file_path>
Copy the IPv4 address under the header EXTERNAL-IP, then on the command line, enter curl -X GET <IPv4_address> being sure to replace <IPv4_address> with the external IP of the Kubernetes service. You should see “Hello World” printed to the console. That’s the response from your cloud application running on Kubernetes! Now, what happens when more and more people start using your service?
Use Terraform to modify existing Kubernetes resources
There’s only one replica of the application running right now, and more may be needed in the future to handle traffic. Fortunately, Terraform can help add more replicas of the application. Confirm that only one replica exists by running the command kubectl get pods -n hello-world-namespace --kubeconfig=<your_kubeconfig_file_path> and notice that only one pod exists that is prefixed with kubernetes-example-deployment. To increase the number of pods running the “Hello World” application, the deployment will need to be updated. Find the line in main.tf where replicas for the applications are defined as replicas = 1 and update 1 to 3. Now in a terminal, run the following command to see what will be updated in the cluster:
terraform plan -out=tfplan
The output should look like the following:
helm_release.ingress_nginx: Refreshing state... [id=ingress-nginx]
kubernetes_namespace.hello_world_namespace: Refreshing state... [id=hello-world-namespace]
kubernetes_ingress.ingress: Refreshing state... [id=hello-world-namespace/api-ingress]
kubernetes_deployment.hello_world_deployment: Refreshing state... [id=hello-world-namespace/kubernetes-example-deployment]
kubernetes_service.hello_world_service: Refreshing state... [id=hello-world-namespace/hello-world-example]
An execution plan has been generated and is shown below.
Resource actions are indicated with the following symbols:
~ update in-place
Terraform will perform the following actions:
# kubernetes_deployment.hello_world_deployment will be updated in-place
~ resource "kubernetes_deployment" "hello_world_deployment" {
id = "hello-world-namespace/kubernetes-example-deployment"
# (1 unchanged attribute hidden)
~ spec {
~ replicas = "1" -> "3"
# (4 unchanged attributes hidden)
# (3 unchanged blocks hidden)
}
# (1 unchanged block hidden)
}
Plan: 0 to add, 1 to change, 0 to destroy.
------------------------------------------------------------------------
This plan was saved to: tfplan
To perform exactly these actions, run the following command to apply:
terraform apply "tfplan"
Because Terraform knows the state of the existing Kubernetes resources, it will only need to change the deployment. Run the command terraform apply tfplan to update the number of running replicas. They may take a few seconds to spin up, but re-running the command kubectl get pods -n hello-world-namespace --kubeconfig=<your_kubeconfig_file_path> should now show that there are three replicas of the application running! These can have traffic routed to them through the load balancer and the service which was defined already.
When you’re ready to clean up the resources from this guide, Terraform offers another command that can help with that. Because it tracks state, it knows everything that needs to be removed. To see what that would look like, enter terraform plan -destroy -out=tfplan in a terminal and be sure to still be in the same working folder that contains terraform.tfstate. Something like what’s below should be printed to the console:
An execution plan has been generated and is shown below.
Resource actions are indicated with the following symbols:
- destroy
Terraform will perform the following actions:
# helm_release.ingress_nginx will be destroyed
- resource "helm_release" "ingress_nginx" {
- atomic = false -> null
- chart = "ingress-nginx" -> null
...
- protocol = "TCP" -> null
- target_port = "3000" -> null
}
}
}
Plan: 0 to add, 0 to change, 5 to destroy.
------------------------------------------------------------------------
This plan was saved to: tfplan
To perform exactly these actions, run the following command to apply:
terraform apply "tfplan"
When you’re sure that you’re comfortable with everything being torn down, enter the command terraform apply tfplan and wait for it to complete. Every resource that was created by any apply step will now be gone. The output should look similar to what’s below:
helm_release.ingress_nginx: Destroying... [id=ingress-nginx]
kubernetes_namespace.hello_world_namespace: Destroying... [id=hello-world-namespace]
kubernetes_service.hello_world_service: Destroying... [id=hello-world-namespace/hello-world-example]
kubernetes_ingress.ingress: Destroying... [id=hello-world-namespace/api-ingress]
kubernetes_ingress.ingress: Destruction complete after 1s
kubernetes_service.hello_world_service: Destruction complete after 1s
kubernetes_deployment.hello_world_deployment: Destroying... [id=hello-world-namespace/kubernetes-example-deployment]
kubernetes_deployment.hello_world_deployment: Destruction complete after 0s
helm_release.ingress_nginx: Destruction complete after 3s
kubernetes_namespace.hello_world_namespace: Still destroying... [id=hello-world-namespace, 10s elapsed]
kubernetes_namespace.hello_world_namespace: Still destroying... [id=hello-world-namespace, 20s elapsed]
...
kubernetes_namespace.hello_world_namespace: Still destroying... [id=hello-world-namespace, 2m30s elapsed]
kubernetes_namespace.hello_world_namespace: Still destroying... [id=hello-world-namespace, 2m40s elapsed]
kubernetes_namespace.hello_world_namespace: Destruction complete after 2m47s
Learn more about how Architect can deploy your application to Kubernetes and elsewhere
Terraform can deploy your application to Kubernetes easily once templates are written, and all of the resources are defined. What happens when the next best thing comes along, though? Surely Terraform would be able to handle deploying your application to another platform, but that would require more maintenance, and likely an entire rewrite of all Terraform templates. With Architect, your application only needs to be defined once to be deployed anywhere. Find out more about deploying Architect components in our docs and try it out!
For more reading, have a look at some of our other tutorials!
- Implement RabbitMQ on Docker in 20 Minutes
- Implement Kafka on Docker in 20 Minutes
- A Developer’s Guide to GitOps
If you have any questions or comments, don’t hesitate to reach out to the team on Twitter @architect_team!
Top comments (0)